I'm updating my resume currently and want my website to be clickable after it has been saved to a PDF so potential employers will just be able to click on it rather than copy and paste. My resume was made in photoshop but can this just be done through Acrobat?
View 1 RepliesI just finished working on a file for a client and saved it to the compressed zip folder that it was sent to me without decompressing.
Photoshop seemed to save to the folder without problems but when I went to go to open it again, my work was gone and all that was there was the original file. Did PS save my work someplace else and not tell me, or was it not saving at all despite not giving me any permissions errors?
I am editing a photo (jpg format) in Photoshop CS3. I insert links to a slice within the photo. If the file is saved as a pdf the links will work. But whenever I save the file as a jpg or gif or any other type of picture format the links no longer work.
I am trying to make a picture that I can insert into an email so that they can click on a certain part of the picture (not the whole picture) and they will be redirected to a webpage. Is there another way I should go about doing this?
Once I had completed working on a project in PSE9, I 'saved as' my work.
I then closed the program and went to re-open the file however, the file appears with the extension 'File' and is un-accessible in all of the photo viewing software I have available. The file is however, still a large file - 85MB - which would suggest all of the file information is still in-tact.
I tried opening the file in several different programs, I've tried re-nameing the file, opeing the file properties to change the file type, backing up the file then restarting the computer and program. So far nothing has worked.
Run this simple test:
1. Open new gimp project. The background will be either the current foreground or background color. The point is it's ONE solid color.
2. Layer->Transparency->Add Alpha Channel
3. Edit->Clear The color is gone and it's a transparent layer. This is what I want to save.
4. File -> Save As (version 2.6)
5. Type in test.jpg
6. Open up test.jpg and you will see the transparent layer from step 3 has magically gone to white.
How do I prevent step 6 from happening?
And yes, same result on 2.8 (Windows)
Sometimes when I work on a complex design project, I've notice that after I save and re-open my file, some of my work area was rasterize and uneditable.
View 2 Replies View RelatedI have the page numbering macro. It works on new files; however, it doesn't work on specific saved files. What could be wrong with those files? Is there any way to enable the page numbering macro in those files?
I use Corel Draw X3, by the way.
I removed color info and reset to greyscale, yet I still get a pink hue when I save as a pdf.
View 4 Replies View RelatedI am using P'shop CS3, I need to make a gif that hyperlinks to my separate web based pdf file.
The gif is sent to a 3rd party, who insert it into their pdf, before distributing it via email.
When people receive the 3rd party pdf, I want them to be able to click on my gif to open my web based pdf.
I've searched hyperlink in the help files, and am obviously not searching very well as I can't find anything?
I have done an advertising piece that will be emailed to a client list in Photoshop, just because I am comfortable with it, and I was wondering if there is a way to create a link to a website in Photoshop versus having to go to another software just for that text line to become a link?
View 1 Replies View RelatedI'm trying to create links from a webpage to specific spots in a pdf. I can get it to work perfectly if I create the hyperlink destinations in the pdf, using the Acrobat software. However, I was told you can create the hyperlink destinations in InDesign, then export the pdf, which I'd like to do because the InDesign original is going to change a lot, and then I wouldn't have to recreate all the destinations every time it's updated. When I try it, though, I can't get the webpage link to go to the destination, only to the top of the pdf.
I'm in CS3 and Windows.
Where the here is i need to add a hyperlink, the image is a jpg.
View 2 Replies View RelatedI have a small part time business doing all kinds of image editing. I get most of my work on a particular site that facilitates the meeting of clients and freelancers
I just recently was awarded a job and accepted the job. Right AFTER that, there was from the client an "Oh yeah, there's just one more thing I need done", (happens ALL THE TIME).
The job was to edit an ultrasound of a fetus and incorporate the image into an invitation to a baby shower. OK, no problem, right?
The "Oh yeah, I've got one more thing", was that she wanted me to put two places where the mother was registered for gifts and she wanted both of these places to be an active, clickable hyperlink.
I've done a small amount of research and read a few ideas about "slicing" but all the tutorials appear to be speaking about doing this to an image on a website, which isn't what I need. I need to create a freestanding image, one that could be attached and or inserted into an email to someone and one that you would be able to click on the text of an URL and it would be an active hypelink that would take you to the store's website.
1. Is this even a possibility?
2. If so, is it something that can be done ONLY with CS5 or would I need other software to accommplish this?
remember, this is NOT to be part of a website, it needs to be a freestanding image that can be emailed and that has an active, working, hyperlink as part of the image.
I'm trying to customise my drawing templates to keep them up to date and also include accountability.I seem to be having trouble in including the name of the person who has last saved the model, and the date the model was last saved.
Manually including this information isn't ideal as people will forget, and it makes it harder to trace revisions.I can't see anywhere on the iProperties where the 'Last saved by' feature is available, but I thought maybe the information could be pulled from the username from the application options?
The last saved date should be easy, as there is a modified date in the model's iproperties; however, I cannot pull this information.I have used other cad packages in the past and this was never an issue. With all the customisation of Inventor, I thought this would be relatively straight forward.
I have a capstone lab project due tomorrow for my graphic arts class and I made a HUGE mistake!!! I created an image using 20 something layers and did SAVE AS as a .xcf image (with all layers open). Part of the project was to save in different formats: .xcf (with open layers), a .png, and a .jpeg (optimized). So, I did the first save and then flattened the image to SAVE AS a .png with a different file name.
Long story short, I was tired and had way too many images open at once. When I was closing all of the images I accidentally saved the changes (flatten image) to my original .xcf (with open layers)!!!! Now, my .xcf that is supposed to have open layers only has one layer...the finished project!! I tried going to the file properties to restore a previous version, but it says that no previous versions were found! I also downloaded a norton "unerase" utility, but maybe I am not scanning properly to locate the file!?!
I would like to add an hyperlink to an image on photoshop but I cannot find the slice tool on photoshop (9 on mac)
View 1 Replies View RelatedWhen a raw file badge shows that the file has been changed, I use Metadata Save to File & for the large majority of my images, the badge goes away and Metadata Status Changed does not show the file. For some of my files, however, the Save to File command doesn't work properly. If I am only displaying files with changes, the file briefly disappears, then returns. Even if I go to Windows Explorer and delete the xmp file, then again Save metadata to file, it pops up again with the badge saying it needs to be saved. I'm using Lightroom 4.3 64 bit on Windows 7.
View 12 Replies View RelatedI'm struggling to figure out how to delete a hyperlink from a PDF I'm editing. The box that shows up around a url address isn't visible on Illustrator but shows up when you open the file in Preview or print it out. Is there a way to delete this box or unlink the url?
View 8 Replies View RelatedI have a string of white paragraph text, to which I have assigned a simple hyperlink to a selection. CorelDraw X5 turns the linked text blue to indicate that it is a live link and the Publish to PDF function works as expected. I want, however, for the linked text to be yellow, not blue, and I can't seem to be able to accomplish this. If I change the text to yellow the conventional way, the hyperlink no longer functions.
Is there a way for me to simply change the color of an active hyperlink?
I created a video and want to insert a Hyperlink to a website at the end of the video, most likely within a title box. Is this possible? I know how to add the text/title to display the website link on the video, but I'd like the viewer to be able to click it and go to the website.
View 1 Replies View RelatedEverytime I try to attach a Hyperlink to a dwg via the ribbon Hyperlink button I receive a FATAL ERROR: Unhandled Access Violation Reading 0x0000 Exception at e1e7b028h.
View 1 Replies View RelatedI have made dblink to database table and attach field from the row to the block label with value = 150 In the same block i need to have block hyperlink with adress like : [URL] To be clear, I need in my hyperlink to include the value of label
View 3 Replies View RelatedI have architectural desktop 2011, my supervisor would like me to attach PDF and/or JPG to an attribute (or make an attribute that will call-up a JPG). I do not think this is possible, So…if it is correct that this cannot be done how can one place a word to a DWG and then ‘hyperlink’ it to a folder or an individual JPG? so I can click on the word int he DWG CAD and it will then pop up the JPG...
View 9 Replies View RelatedOn Mac OS X 10.8, Illustrator CS 5 (Adobe CS5.5)
I'm creating my resume in illustrator, very very basic stuff. Not special settings or anything, just a few guides and lines of text. I've tried creating a new document and retyping everything to no avail.
Basically when I'm done formatting and creating the resume how I like it, I Save As to PDF and open it up in Preview, Reader and the built in pdf viewer in my browsers and noticed that the entire document is now a clickable link...center of the page, near the top of the page etc. Its picking up one of my reference contact's email addresses from the bottom of the page.
So i tried changing from paragraph left to paragraph center and it seems to stop the issue. but if i revert back to my preferred formatting its there again.
When I remove their email, no longer a problem. and i can revert to my prefered formatting and with his emial remove the reference below his, their email is intact and not casuing the problem.
My previous resume formatting was all in paragraph center formatting so it was never a problem..
I've been doing quite a bit of research on how to make an object into a hyperlink when exporting my .ai as .pdf.
So far I've come across guides that show the method of using Object > Slice and the Attributes' Image Map, but none of them seem to work when I open my exported .pdf.
How to create objects with links when exporting .pdf?
Three years ago I created a drawing in which I inserted Hyperlinks into the drawing. When I made a PDF from the drawing the Hyperlinks were still there and worked correctly from the PDF. Not sure which version of AutoCAD this was created from. I am now using 2012 and have tried to repeat the process but when I create the PDF the Hyperlinks are not there.
View 4 Replies View RelatedI have hyperlink in the block, and block label with some value,which changes from time to time.
I need in my hyperlink to include the value of label,something like [URL] ........
So how to extract the label value and use it in block hyperlink?
I cant get a Excel hyperlink in a drawing to open. Is there a way to find out where they are stored?
View 1 Replies View RelatedIs it possible to create a hyperlink to individual images in LR4
View 9 Replies View RelatedI have facing some problem in symbol. i;e In a symbol have created three rectangular boxes (rect-1, rect-2 & rect-3)& in main-time line there is three lavel (label 1, label 2 & label 3).
i want to create functionality that is, when i click rect-1 box, i should be play "label 1", when i click rect-2, it should play "label 2" & when i click rect-3 it shuld play "label 3".
Is it possible or not
I cant set a hyperlink to any page higher than 10.If I click on "more" a box opens that you could presumably edit to page 11 or higher,but the mouse wont allow the writing of text.Has Corel 13 10 pages as maximum or something?
View 1 Replies View Related