doesn't have black and white dots fidgeting around all the time.
about the Layer masks. I've just started using them, and I've seen artists on Ustream who can work on single colored flats on an entirely colored layer without touching areas with a different color than the one they're working on.
I've tried back and forth with the layer mask, but I've still got no clue.
When you clip an something from a file you insert, is there a way not to have the outline that you clip show?
View 1 Replies View RelatedFor Max design 2012 x64 (running on Win7 Ultimate with Geforce 9800GT) I get an invisible marquee selection box when trying to select anything in any viewport.
I’ve update Max with Sp2 and Hot fix 2 but they have no effect.
I’ve updated graphics card drivers to the latest available.
I have the View cube switched off.
Is there anything else I can try?
PSE9 under MAC OS 10.6.8.
I don't know how I can add to what the title already says. I would like a photo to have a soft border that feathers to invisible. I've tried to set an absolute invisible border (select invert followed by a background erase of the selection) and feathering that, but I inevitably get feathering that starts at the outer edge, crosses over into the photo itself leaving a sharp edge showing, and extends too far into the photo.
I simply want all four of the photo's edges to "disappear" into nothing.
I make a new 400 x 400px document and I want to use the marquee tool to make a selection. How do I make a selection with the marquee tool to go down 14px from top and 14px to the right? I know you can use the move tool and move the selection 1px at a time with the arrow keys on your keyboard,
View 1 Replies View RelatedAre the light rays made using outer glow around invisible lines? If not how can I make the white light rays like that in photoshop or illustrator?
View 5 Replies View RelatedIs there any way to make the text box outline invisible while typing?
View 4 Replies View RelatedI'm using Gimp 2.8.4 and when selecting a new layer to work on, it then switches to another layer which becomes the selected one.The only way I can definitely select the layer I want to work on is to make all other layers invisible.
View 6 Replies View Relatedany way to view invisible block attribute? I created a block and the attributes really don't need to be seen in autocad just there for dataextraction and keeping it all in one location i want to go back through and make sure i have information filled in in all the right invisible attributes without having to open each block and check the attributes, but i don't want them permanently visible (i know i can freeze them or put them on a non plot layer but it clutters up the space when there is 20+ attributes to a block)
View 9 Replies View RelatedI have some parts in a subassembly that I want to make invisible. When I input my iLogic code(that I used hundreds of times before) the part is made invisible in the subassembly only if I open the subassembly. When I go back to the parent assembly it still shows the part visible. Here is a sample of my
If ACCESS_DOOR = "NO DOOR" ThenComponent.InventorComponent("INSPECTION DOOR:1").BOMStructure=BOMStructureEnum.kReferenceBOMStructureComponent.Visible("INSPECTION DOOR:1") = FalseElse If ACCESS_DOOR = "12X12X6"
[Code].....
The components I'm referring to are the components "Component.Visible("ACCESS DOOR STUD:2") = True" for the stud,clamp, and handle.
I would like to make a transparent icon.
That is, it should look like nothing is there, and it should be a bmp file.
I know you can do it in photo shop but I want to know simply can you do this is illustrator, I'm a new author working on my children's novel and I'm trying to get my prints or images on to backgrounds but I need the white behind my images to disappear. Can I do that in illustrator or do I have to have photo shop for that?
View 28 Replies View RelatedSo I'm learning about the whole new world of options with using imported .shp files in CAD and I'm unable to find a way to make a .shp file invisible in a viewport. I know I'm very close to it as there are a bunch of new contexual tabs that pop up when I select the .shp objects. It just seems that the layer control for traditional CAD does not apply through the MAPWSPACE toolspace window.
Civil 3D 2012
Windows 7 Enterprise SP1
Dell Precision T3400
(Q9550 @ 2.83 GHz)
8GB RAM
Nvidia Quadro GTX 650 Ti BOOST
in a drawing I made some lines invisible (right-click on the line, and uncheck visibility). how can I make these lines visible again? for obvious reasons I can not right-click on them (they are not visible), and I don't find them in the browser tree.
View 2 Replies View RelatedIs there a way to make parts invisible directly independent to the selection you made (selection can contain visible, invisible or both parts)?
Most of the time, i make a selection in the model browser and want to put a list of parts directly invisible. Sometimes i also select already invisble parts.
Now what inventor wants to do is make them all first visible before i can make them invisible. As far as i know, there is no other option to do this.
Is there maybe a combination with holding shift or something to directly toggle them invisible?
How does one make the border of the picture blurry like this?
View 2 Replies View Relatedhow do you make a simple border around text? I checked out the tutorial in the Teamphotoshop site, however I couldn't find "Effects" under "Layer". I have Photoshop 6 (soon gonna be getting Photoshop CS), is that the problem?
I tried to just highlight the text, expand it (or make a border, either one), and use the paintbucket tool to fill it the expanded/border area. However, it leaves off a slightly gritty or faded border.
I also tried by going into the layers, right click on text layer>blending properties>outer glow. But it still leaves a faded border.
I'm using CS6 and noticed that whenever I delete a layer that was a dupe of another layer with links (although not linked specifically to the deleted layer), the undeleted original layers become invisible on the canvas even though they are still visible in the layers pallette. I've been able to recreate this several times. Nothing I do will make the layers visible -I've tried moving them all to the top of the layers palette, making sure their opacity is 100%, making sure there are no layer effects, etc.
View 2 Replies View RelatedI've never encountered this before, but my Marquee tool is doing this now. The corners are not sharp, 90º angle corners, but are "stepped". I'm using PS 7.0. Any ideas on how to stop this?
View 4 Replies View RelatedI just wanna draw a white circle with a black outline(border).
View 3 Replies View RelatedI want to make a border/frame around a picture and add a caption. Can I do that in this program? If so, how?
View 2 Replies View RelatedHow to make postmark border in CorelDraw?
View 5 Replies View RelatedI had a question on how to do a specific border. I need a border around the edges (the Fuzzed Border is just fine), and I can do the border, but what's really getting me is making the fuzzed section transparent. Like the border done needs to slowly fade to a cut-out.
View 1 Replies View RelatedI am using Autocad 2012. I am battling to find out how to make a border and title block for my machine drawings . Do i do it in paper space or in model space.
View 9 Replies View RelatedI am working in cs6 for Illustrator and Photoshop. I would like to make a rounded rectangle with an inner border. The area between the two borders I would like to add a decorative paper that I created in Photoshop. The large center remains white. I've tried clipping it, but apparently did not do it correctly. How to accomplish this?
View 10 Replies View RelatedI'm wanting to create an image giving the impression of a square, flat plate, with a raised thin (1mm) border.
It has to have a chrome metallic look. If possible, showing a stippling texture on the inside of the border.
How to use Smoke make Dark Edge Border effect. I have tried wipe, make a mask and enable the advance gradient, but not happy with the result. Is there any other method to make a Dark Edge Border effect?
View 7 Replies View RelatedI'm making an ebook cover with a white background and I want to put a grey pixel cell frame around it but I don't know how to do it. I'm only getting started with getpaint.net.
View 3 Replies View RelatedWhat technique should I use to make the edge of a video reel border the speech bubble, like in the attached sketch. I've already traced the speech bubble and the exclaimation mark.
View 1 Replies View RelatedI know this is very basic but I can't find a simple way to do it. How do you draw just a simple thin square or rectangle black outline on a white background?
I have tried:
1) Using the square outline under "custom shape tools" but it makes too thick of an outline.
2) Just drawing the 4 sides with the line tool at 2-3 pixels but that is too hard, trying to get each side the right length and properly oriented to make the square.
3) Using the rectangle tool (and the rectangle marquee tool)
to make one black rectangle, then using it to make a white rectangle inside the black one in order to make the black outline. But that is also too hard - trying to get the inner white rectangle the right size so that all the black borders it creates are the same size.
Can someone please explain how to make a simple thin outline? Seems there ought to be a simple way to draw a square/rectangle, but I can't find it.
I have a drawing that has a white background.
I would like to add more to the white background to make it bigger without having to stretch it and distort the image.
I want to place a circle shaped outline border around the original image with a set border thickness and color and be able to crop/remove the portion of the image beyond the outline, changing it from a square/rectangle image to a circular image.
If I am not able to change the drawing to have a round outer border from square, how can I make the outer parts past the newly created circular outline transparent?