how I can disable the function of auto close. When I'm using the poly lasso tool, if I wait too long between clicks, it just closes the selection and displays the marching ants.
View 9 Replies
When creating selection marquees, i.e. magnetic lasso, etc., I like to "set" lots of anchors close together when tracing along an object. I can't tell you how many times I've been 98% finished w/ a tedious selection, and accidentally closed a marquee because the system "thinks" I double-clicked. I've set my double-click speed in the windows control panel as fast as it will go, but this still happens. Del does not delete the last anchor point once the selection is finished. It cuts the selection out.
Ideally, I'd like a way to specify an altenative method in PS to finish selections, i.e. SHIFT CTR click, or ENTER, etc.
Does anyone know of there's some registry trick, etc. to accomplish this in Windows w/ CS2 or CS3.
As there a way to do this in PS prefs, etc, that I've totally missed. I just can't imagine I'm the only one having this annoying problem, but I can't find a single mention of it on google with what I felt were good search criteria.
At minimum, I'd be happy with a way to "Undo close selection", so I could resume setting anchors & finish it properly.
Unlike other programs, this one closes the application rather than a window.
View 2 Replies View RelatedHow do I close elements auto analyzer? I am trying to download a new camera raw version - elements 11 - and it has 2 seconds left but will go no further as the elements auto analyzer will not close. I went to organizer - edit - preferences - media analyzer - unchecked run at start up but nothing has changed.! I have been struggling with importing raw files from my Panasonic FZ200 for weeks and was 2 seconds to fixing it!
View 2 Replies View RelatedI have read several forums about how to disable the auto-recovery feature. However, I don't want to disable the auto-recovery because I like that it saves my work in case of crash.
It's just annoying that every time I open Photoshop all those previous files auto open. Is there anyway to make it stop? I read that there is a file that you delete, but will that stop the auto-recovery feature?
I've created a simple poly surface mountain range in Blender 3D, with no smoothing applied. Yet when I import it into Photoshop CC it appears to have smoothing enabled, giving me undesirable results.
I've tried multiple formats (obj, 3ds, dae) and get the same results. I've checked to see if Im just exporting incorrectly, but when I open it up in SketchUP or Maya, I get the flat rigid surface that I want, and not the smooth surface.
can "Auto Align Selected Layers Based on Contents" be disabled during photomerge?
=> First, most of times the auto align result is not good
=> it takes time to wait for window to appear, sometimes hangs
=> When all images are jumbled together, it is like making jigsaw puzzle.
Actually I got used to Photoshop CS2 where I disable auto align check box...And I manually create the "mosaic" (not just a flat panorama) from images taken from microscope.
For the move tool you can choose to disable auto selection, auto select a group, or auto select a layer. By default though the path selection tool autoselects a layer. How can I disable autoselection?
View 1 Replies View RelatedI want to disable the auto renaming feature in text layers so that I can change the content without change the name of the text layer. Also i want to do this to all the text in one step, without do it manual one by one.
for more description, i am working on replace English text with other language but i want to keep English name of all text layers SO i want to disable auto renaming while replacing the content.
I would like to disable the auto scroll function. I am tired of getting thrown around in photoshop and indesign. if this can be done and if so, how to do it.
View 28 Replies View RelatedWorking in the CC3D features, I am constantly making changes to my bump map. Every time I step-backwards, or make a significant change to the bump texture (smart object?), CC auto-saves the layer. This specific file is a very very large document (3 gigs in the bump texture layer alone), and the 3D layer has lots of lights and is very complex.
This auto-refresh/update really bogs down the time that it would take me to make my changes. I have a very fast machine (I know it's fast, I dont need to list my specs), and I have all shadows disabled.
How do I disable linked smart-object auto-update/refresh?
how do i disable auto-start in Adobe Quick Launch; elements 3.0
View 1 Replies View RelatedWhenever I make a stroke with my brush tool, it smooths out. I have checked everywhere to try and find a place where you can "disable" the autosmooth on your brushes, and have found nothing.
View 2 Replies View RelatedI would like to disable auto import.
I uncheck "Show import dialog when a memory card is detected" under Edit - preferences - Import. However, it rechecks itself when I close lightroom down. Then whenever I put in a storage device -- a memory card, external hard drive, flash drive, etc -- Lightroom starts up and wants to import from that device.
How do I prevent this?
I have a series of complex shapes that look like solid shapes but they are separated. When I try to auto close, the lines shoot all over the place. The open ends of the lines are physically touching or at least very close.
Can you set a tolerance so that two lines touching each other connect?
when i make my brush size very small (to the point that its only like 4pixels dot on the screen), a crosshair symbol automatically appears around it which makes it hard to see the cursor's surroundings when working on small details without zooming in alot (which would make a 4px cursor appear bigger thus losing the crosshair again). I guess this feature is there for people that might have trouble locating small cursors, but on a large tablet that allows very fast work without having to zoom in much, this makes things harder. Is there a way to disable this or modify some files or "hack" the cursor icons somehow and delete it?
(Tried all possible combinations of the PS prefferences but none of it seemed to be related to the cursor becoming a crosshair once the brush size gets very small relative to screenresolution)
Every time I insert a USB stick or CD or DVD which contains image files I get a popup window asking me if I want to download those files.
I know that I can disable this annoying window by running MSCONFIG and then selecting STARTUP and then unselecting CorelIOMonitor and Corel Photo Downloader but is there another way of disabling it (as I really prefer not to change STARTUP.
inside CFX, when i move node in a network with a lot of nodes, sometime when i drop the node, i can accidentally connect it to wrong node, as there will be a lot of connection line in that area. So is there any way i can disable this autoconnect feature temporarily ?
View 4 Replies View RelatedI have seen a reference to the auto close gaps button on the toolbar of CorelDraw.I need something like that, because whatever I do I cannot fill my lineart with the smartfill tool, even though I have closed all the gaps, as far as i can tell.
I am wondering if there is a problem with my Coreldraw X5 Software.I am using it on an iMac with Parallels.
Is there an automated way to have all the nodes in an (open) curve that are close to eachother to either join or connect with a line ?
"Auto close" dont offer settings and doesnt seem to do this
Is there a way Autocad could just do what I asked for, and nothing more?A few examples
- After publishing, the publish dialog auto closes. I don't wat that. After publishing dwf I also want pdf.(I know you can save the list, that's not the point. If you didn't close the dialog I wouldn't need it)
- When selecting a hatch, the ribbon automatically jumps to Hatch Editor. I don't want that. Maybe I just want to change the layer. I can find the Hatch editor my self..Dito for XREFS
- I do not want any dialog giving me warnings, about anything.
If an XREF doesn't get attached, I can see that. I don't need a dialog telling me.If a shape file is missing, I can see that..A triangle sign above the command line is totaly adequate.Don't auto open or close dialogs, for what ever reason.
So ... don't auto do anything I can perfectly do manualy. No doubt there are a few more examples I can't think of right now.The nice thing would be to get a variable that gives me that "no auto" mode.
Realitivly new to 2013, upgraded from 2007.
We will alter the Arch Base CAD file layer colors to a muted color for use as our backgorounds. We would sort the Layers by color, so that we could group them together to one base color, so basically layer colors 10-19 would then become 19, 20-29 would be 29, layer colors 30-39 would be 39, etc... If the colors were one of the 9 Base Colors (Red, Yellow, Green...) Red is effectivly the same as color as 10, so then we would make it 19, etc...
In 2007, even thought the sorting was by layer color, the layers rows would remain in the same location until we applied the changes. But in 2013, if we sort by color then alter the color, the layer row will automatically be re-sorted to its proper position in comparison to all other colors. OK I get that, but, if we are altering 40, 50, 60 layer colors, that auto re-sorting is annoying, because then we need to rescroll to our last location to continue.
So, is there a way to turn off the re-sort until we APPLY the colors.
I have photoshop cs4 and I cannot find the Auto smart fix, auto levels, and auto contrast nor the adjustment for each that I had with photoshop elements.
View 10 Replies View RelatedI was using these tool on a lot of images, because they often seemed to vastly improve them, making the colors pop on otherwise somewhat dull ones, and getting rid of unwanted color casts..
Later though I noticed that it is often at the cost of burning out hightlights in some areas beyond salvation.I also find shadow /highlight sometimes does this also.
Then I tried to protect some small areas with a mask before proceeding, but it seems that I can't find information on just painting a mask, but only videos with much more complex adjustment such as the Russel Crow or Lynda ones with maintaing hair detail while superimposing images, which is way beyond what I need in these cases.
If I try the wand to select and inverse I get unnatural looking divisions. Is it a matter of feathering to the right extent?
I have just moved from 7.0 to CS3 (and PC to Mac) and am currently trying to get to grips with the new features! Once which I love is the auto-align and auto-blend feature(s). My question is, is there any way to control how these features work? I have seen on some web sites people talk about 'fuzziness' sliders where you can control that if an object (pixels) appear in X% of the photos they should/shouldn't be included in the final image but I cannot find these.
My intention is to use these features to take photos of monuments and have the people who are moving about removed from the final image (I guess it's the auto-align that would do this.) I tried a test and took a number of photos at home but I kept moving one object around (a pen.) The pen appears in all the images but in a different location so it always appears in the final image. When I tried auto-align with a stack that included one image without the pen, the pen was removed from the final image. Given the first scenario (i.e. the object is in all the images but in a different location) is there any way of automatically removing it using auto-align or would this have to be a manual process? In the real world, it would be possible to take a photo of a monument with people in different locations but it would be much harder (or take a long time) to take one where at least one person was not in all the photos (there's always someone loitering.)
Yes, I'm probably the only person on the planet that wants this, but I liked how the Auto Tone auto adjusted the Exposure slider (ONLY!) and left all the other sliders at zero in the Lightroom 4 beta.
Is there a way to write a preset that returns that behavior?
When I try to load updates, I am informed that I must close cs5.5 bridge. I then do so. I then try to load but am informed that cs5.5 bridge needs to be closed.
View 2 Replies View RelatedI am currently using a windows 7 Toshiba laptop. I have downloaded the free trial of Photoshop but after around 5 mintues of use, it encounters a problem and has to close. Unfortunately, windows can not find the problem. I am therefore unable to do any work. I have tried restarting the laptop several times but it still keeps happening.
View 2 Replies View RelatedMy photoshop 6 has just started locking-up and not letting me close the program.
I have reinstalled photoshop.
I purchased and installed the Adobe design premium CS3.
Photoshop usually close sudently without saving files.
the close-up tool, which by default used a (+) sign to amplify detail, switched to a (-) sign to show detail further away from the viewer. That's the magnifyin glass icon. It must have happened when using the Alt key.
But the (-) mode became permanent and there was no way to change it back to (+), even after re-setting tools, and even after uninstall re-install.
It took uninstall and deleted a subdirectory and its contents, where P.S. stores user parameters, that it installed as (+) which is the default mode.
