Photoshop :: Get Unpredictable Number Of Copies From HP Office Jet PRo 8000 Printer
Jul 15, 2012
I had it when CS5 was new. Now it has returned after 3 years. I get an unpredictable number of copies from my HP Office jet Pro 8000 Wireless printer when printing from Photoshop CS5. I do not have the same problem printing from other programs.
The problem is that I don't get the number of copies I ask for. If I set the number at 4 I may get only one. Some time later if I ask for 1 I may get 4 or 3 or 2. HP support asked me to "clear the print cache" by stopping and restarting the print spooler in the "services" list. That rectified the problem when it first happened, but now it has returned and the same process seems not to be working.
View 2 Replies
ADVERTISEMENT
May 3, 2012
I have moved from VBA to .NET. Is there a way to access the "Number of copies" value as set in the Plot dialog? I know this value always gets re-set to 1, but I want to know if it is possible to get the value set by the user *after* clicking OK in the Plot dialog. "Number of Copies" does not seem to be exposed as part of the "Layout" object in .NET (nor was it in VBA). Is it available anywhere else? Is this stored in the registry, and if so where is it located?
View 4 Replies
View Related
Sep 14, 2013
i have a fast EliteBook pro Windows 7 , 8 gig ram that encouraged me to install 8000 more fonts to my windows , that what i shouldn't do ! now am in a trouble .
my photoshop cc is too slow now , i can't even work on it .i wanna uninstall those fonts but i don't know which one is which because i could remove windows 7 fonts by accident and that is the real catastrophe then .give me solution other than uninstalling windows 7 and reinstall it again .
View 4 Replies
View Related
Jan 13, 2013
I am having an issue that cropped up as of late - I try to create a virtual copy of a photo, but instead of the normal page-turn icon in the bottom left and it auto-expanding to show the copies, it just creates a stack, and says "2" or "1 of 2" and the double line bars on both sides of the preview in Grid Mode. Is there a setting that I changed that caused that?
View 7 Replies
View Related
Jul 24, 2011
Can I change the default bitrate from 8000 kbps to 6000 kbps permanently? I brought a number of individual .mp4 song files into the timeline, about 1 hour twenty minutes total in length, can I normalize them without using "create video file". I want to play this video and be able to skip songs if I want to. The original file .mp4. I am using a trial of Corel VideoStudio Pro x4.
View 1 Replies
View Related
Jan 5, 2013
I've set the cell height's of a table to some reasonable height after creating the table.Whenever I try to enter some text in any of the cells, either the table resizes to the original height or the currently selected cell (or whatever CorelDRAW believes might be the "selected" one) becomes so huge it spans a couple of rows, making it impossible to click on any of the cells below that currently active cell.
CorelDRAW Graphic Suite X6.4 @ Windows 7/Windows 8 - 64 Bit, Windows Server 2008 R2, Windows Server 2012
View 2 Replies
View Related
May 17, 2013
If you import a bitmap into draw and then use the "node edit tool" to crop parts of the image, subsequent tracing causes unpredictable results... a random part of the image gets traced...
View 4 Replies
View Related
Nov 9, 2013
I've deleted my PS preferences and restarted, and I cannot get this filter to do what is was just doing a day earlier. It doesn't matter what the foreground/background colors are, nor does it matter what the resolution of the file is. I've experimented with every variable. The filter effect changes the filled layer to a solid color of the current foreground color. No lines, dots or circles at all.
I'm trying to make lines in a filled layer, or a rasterized text layer.Adjusting the sliders has no effect at this point, but the other Gallery filters DO work, oddly enough.
I've used this filter effect many times over the years, and it just started acting wonky. This is PS CS6, on Mac OSX 10.8.5.It seems to be unpredictable or temperamental. Is there a reasonably-priced plugin that will create lines that are completely adjustable?
View 6 Replies
View Related
May 30, 2012
I want to use the "Avengers" logo, but change it to say "Arapahoe" instead. Here is the original logo: URL....
So, my vision of this would be to keep the "A" (removing the "the" in the middle of it also), but change the rest of the text to say "Arapahoe". Id like to try and keep the font/texture of the text to look the same as best as possible.
Also, change "Marvel Studios" to say "Colorado Public Defenders".
View 8 Replies
View Related
Jul 5, 2009
I have a photo which I believe was scanned in Microsoft Office Documrnt Imaging. It was saved in tif format (at least what that program called tif format). While the photos are supposed to be in tif format, I can't open them in Photoshop.
View 10 Replies
View Related
May 2, 2013
I'm currently using AutoCad Electrical 2010 and we just got a new printer. Is there any way to map all of my electrical drawngs to that printer without opening each drawing and selecting the new printer?
View 7 Replies
View Related
Mar 6, 2013
how to change the printer associated with PSP or add another printer? I have 2 printers installed on Windows7 but the only one I get when I try to print from PSP is the wide format printer & no option to add another. Is printing from Windows Photo Viewer my only option?
View 6 Replies
View Related
Jan 29, 2014
What is the possibility to use LibreOffice or OpenOffice with AutoCAD instead of MSOffice?
I wrote a lisp to import data from Libreoffice spread sheet to ACAD but I could not update this spread sheet by outputs from ACAD.
View 2 Replies
View Related
Nov 15, 2012
Are there alternatives to the MS Office Excel for use in Inventor?
View 1 Replies
View Related
Nov 11, 2011
I am trying to measure the area of an office space within the stadium and keep getting a ridiculous figure - it keeps saying that it is something like 14 thousand square metres. Am I doing something wrong because it should be coming in somehwere near 150 sq metres?
Here is a screenshot:
View 9 Replies
View Related
Jul 10, 2013
I am able to insert my open office text OLE. I can double click and edit the OLE in the drawing. However, the insertion is not 8x11 more like 100' X 200' and only a small portion of the document is displayed.
View 2 Replies
View Related
Aug 6, 2012
When I open drawings created by others, I get a message " Specify font for Style OPT and "Arial Unicode MS" and a host of other fonts appear in the table. If I substitute this with Arial from the drop down list then the drawing opens. I believe Auto Cad automatically picks up either the SHX files in its own font directory or font files from MS office. My computer has Arial Unicode files in C:/Windows /Font directory and I do not know why it is not picking up the font from that file.
View 0 Replies
View Related
Oct 1, 2013
I've got an admission form in pdf format. I tried everything every converter but it didn't gave a perfect result, then i tried to import pdf into coreldraw x6 & it looks perfect but the problem is I need to provide this document in editable doc format. I've pasted link below to find both pdf & cdr file.
[URL]
View 9 Replies
View Related
Mar 22, 2012
I work for graphics company who uses Corel heavily for all of our graphics work. We have custom built macros that were made to save our art into our database to then be accessed through Microsoft Access.
We've had these Macros running for many years and have never had any issues. Due to a mail server crash we moved to Office 365; a cloud based mail server. We then started updating our machines to Office 2010 to be able to use our new cloud based email locally.
The issue is once we upgraded to MS Office 2010 our macro stopped working and we cannot see where the issue is being caused. The weird thing is it's on both XP and Win7 machines.
We've uninstalled and re-installed Corel with no luck. I've changed permissions in Win7 and it has done nothing.
View 3 Replies
View Related
Nov 22, 2013
I have two identical computers (dell 745's) running windows 7 and Autocad 2012 (64bit). on one machine opening a drawing which has is a linked OLE document everything displays properly. On the other machine the same drawing is opened and only the top 1/4 or so of the OLE document is displayed in the area allocated to the OLE.
This drawing also displays correctly on a HP laptop running win 7 and autcad2012.
I have dumped the variables from all three machines using setvar and copy and pasting and can see nothing that is different between the machines.
I've used this method a lot in the past using acad2008/win xp pro and did run into a file occasionally the would mess with the OLE but it's been limited to one file once in a while. Now since I've upgraded this one machine refuses to handle any OLE's. I like the editing commands in word better the the limited commands in AutoCAD tables or Exel for that matter.
What variable or settings affect ole's?
View 1 Replies
View Related
Apr 16, 2012
ACA 2012
What's the best way to share tool palettes within an office?
I do it through profiles: I Created an 'office' profile (.arg) that I eventually share with every employee in the office. Whenever I add things to the tool palettes, I simply create a new profile for every user.
However, lately not every palette gets transferred. I've done a major reorganisation of the office tool palette and only a very small amount of palettes actually get transferred.
ACA 2012
Windows 7
Intel Core i7-2600 CPU
3.4GHz - 8GB ram - 64 bit
View 1 Replies
View Related
Nov 14, 2012
We are seeming ot have problems with a few of our engineers having the Microsoft Office product go to "Not Responding" and then closing while working in Hydraflow & Hydrographs. This has been with Outlook, Word and Excel. All workstations are 64 bit systems with 16 gig of Ram Windows 7 and Civil 3D 2012 SP2.1.
View 2 Replies
View Related
Aug 6, 2013
i have an office building designed in Revit and i want to put a Fascia around the top- it just will not work for me!the same to the roof- i want a flat roof, so i did a roof by extrusion and it asks me for workplanes etc?then it tells me this:Extrusion roof sketch must be open. The roof's thickness and material composition are defined in its type.
View 9 Replies
View Related
Apr 11, 2011
How to share tool palettes with office members across a network. There seems to be a fair amount written about this but none of it seems to be working for me. Any method of doing this that works and if so do the palettes update automatically for everyone else if I export an update?
View 8 Replies
View Related
Jun 22, 2013
How can create Office 2013 flat icon style with AI CS6?What is technique that used for it? [Like use "Pen Tool" with 2px strok size for divide or .... ]
View 5 Replies
View Related
Nov 7, 2012
I have 105 files that I would like to compress down. I have searched these forums but didn't find any threads related to my inquiry.When I create a script to compress to 96dpi there are weird color/light artifacts in the resulting pics. When I do the "save for office" function the pics get even smaller with no artifacts.
1. what settings does the "save for office" compressor use so that I can recreate thru other means
AND/OR
2. how do i create a batch process script using the "save for office" menu item?
View 3 Replies
View Related
Feb 19, 2012
understand the impact of the options “Save for Office” / “Copy for professional printing”.I am writing a thesis through Microsoft Word and I use a plenty of images. Normally, I handling the images in PSP and I insert it in Word through “insert picture from file”.
I realized PSP has the mentioned resources to handle images to Office applications. I intend to print Microsoft Word obtaining the best image quality of my pictures. Is “Save for Office” or “Copy for professional printing” worth using?
Many times I take images through PSP “screen capture”. So, if I use in PSP “Copy for professional printing” and paste in Word, will it improve the final document printing?
View 3 Replies
View Related
Jan 23, 2012
Using Set Sheet Manager, I am trying to create an Office Standard Sheet Index Table.
I have begun by copying the Standard table and modifying it. I have adjusted the cell styles to reflect our colors and text types and sizes. I have also added two additional columns for revision number and revision date.
I have tried saving the new table ... and inserting a new table through the sheet set manager
the only tables i can bring in include the 2 original columns (sheet number and sheet title) and specified text font, size and color are maintained, but the additional columns and the column width are lost.
Ideally i would like the office format to be maintained...with little or no modification required of the user.
View 2 Replies
View Related
Sep 7, 2012
I recently upgraded from Autocad 2012 Mechanical. Previously, I was able to simply select objects in AC, ctrl-c them, then paste them into Word. I am now using 2013 Product Design Suite, with the Vault addin for word. I am now unable to do this. What I notice is that when I switch to my Word window and paste, there's some unknown process occurring in Autocad. Furthermore, what should be an image box with my drawing in Word is a blank box.
AutoCAD: 2013 Product Design Suite, using 2013 Mechanical.
Word: 2007, Service Pack 2.
View 6 Replies
View Related
Nov 14, 2012
Without our office, we set up Sheet Sets for every set of drawings we produce, and we setup Page Setup Overrides specific to those drawings from which we can print. We may setup one for printing fullsize PDFs, another for in-house half-size plots, and another for 11x17 printing. The Overrides are saved on our office network.
We've been having an issue where the plotter(s) in the various Overrides won't work initially when someone other than the creator is printing. That person will have to open up the 'Manage Page Setup Overrides' tab, select 'Modify' for the Override they wish to change, and select the plotter to use in that Override (the plotter always defaults to 'None'). They can publish from that particular drawing set just fine until someone else in the office needs to print using an Override, in which case they go through the same procedure listed above.
We're using network printers only, and we've verified that the printer names, ports, etc. are all the same between the various computers, so different naming or port selection doesn't seem to be an issue.
View 6 Replies
View Related
Mar 28, 2012
How to “synchronize” the ‘layout number” with “sheet number”?
As in most cases, the arrangements of “lay outs” reflects the way they are regularly printed, then how could we renumbering the sheets such that the first lay out takes number 1, the second lay out takes number 2,…and so forth.
For example, in the screenshot below, the
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
View 2 Replies
View Related
