I forgot to change my options for xmp sidecar files in bridge last time I installed it. For a good two months it's been saving xmp data in the camera raw database instead of in sidecar XMP files.
Now I need to move a whole bunch of raw files to a new computer and I don't want to lose all the camera raw adjustments. Is there a trick to write out the info it has in the database to XMP files along with the corresponding raw files?
I am using CS4, with Camera RAW 5.7 and Adobe DNG 5.7. These are the versions listed as compatible with CS4. I am using a new Canon Powershot S100. Can I use newer versions of the RAW/DNG with CS4?
View 7 Replies View RelatedI have downloaded updates for cs5 and still I cannot open camera raw files
View 5 Replies View RelatedAs the title says my 32-bit HDR files open as 8-bit in Camera Raw 7.3. I have a Win 7 32-bit system. I create the 32-bit HDR and then save it as a 32-bit TIFF but when I open it in PS CS6 via Camera Raw 7.3 it comes in as only 8-bit.
View 1 Replies View RelatedWondering if there is any guidance on retention of .dat files in the folder called UserLocal SettingsApplication DataCameraRawCache. I have close to 1 GB of .dat files in that folder, and am looking for ways to keep down the storage in my O/S (boot) partition.
View 1 Replies View Relatedi have a Nikon D600.
I have interest in working with adobe elements 11 so i download the trial version but i can´t get my raw (NEF) files to camera raw.
Is there any trial version suitable for my camera?
I noticed that if you have a ".psd" file even if it is Flatten, it will not open in camera raw. I can easily save it to a Tiff or other formats and open it in camera raw, but I wonder why .psd file does not open in camera raw.
View 21 Replies View RelatedI have CS6/CR 7.2. I have had this issue where my file dates became changed (8000 odd files) so I had to restore 23000 files from backup .
When investigating trying to find out what happened. when I open a JPG from Windows Explorer, photoshop is set to use Camera Raw for jpg files on open (ok). If I cancel the dialog, nothing happens (ok). If I click Done or Open Image, the file itself has the "Date Taken" time updated - 7 hours ahead of the original correct time.
This pretty much matches the date issue I have on the 8000 files. Is this expected behaviour? Why would Camera Raw update Date Taken and did it choose 8 hours because I am in the PST timezone (GMT-8 or currently GMT-7 with daylight savings)?
I have reproduced this on 4 or file random files - taking copies and comparing afterwards.
I made a picture in HRD Pro, and i want to work on it. I saved it as a .psd and also as a .tif, but I cannot open nor the .psd, nor the .tif in Camera Raw? If I save it as a .Jpg I already lose quality..?
View 15 Replies View RelatedI've replaced my Ps 5.5 by Ps 6. Now I'm having problems with opening psd files in Camera Raw; in Ps 5 I worked from Bridge and could open that type of files from Bridge to ACR.
I just found out how to open it in Photoshop: open as....RAW file. But I want several psd-files opening in ACR simultaneously, because I want to synchronize them. That is not possible; I can only select just 1 file.
I use photoshop cs4 and a Nikon D300s. I updated camera raw 5.4 and photoshop does not recognize the raw files.Lightroom 3.6 does not recognize the raw files either.
View 2 Replies View RelatedI have photoshop creative suite version 12.1 - just bought a new mark iii camera and my raw files won't open in my photoshop version....what can i do??
View 7 Replies View RelatedPhotoshop raw is cropping my cr2 images even after I have removed the crop in DPP (Digital Photo Professional - Canon's own raw editing software). I have many images cropped by a Canon 5D3 as it forces a 16:9 crop when you take a still while in video mode. The rest of the data is in the raw file, but this is not read by Camera Raw which forces the 16:9 crop. I have removed the crops in DPP, and even re-cropped with a different crop, saved the files and used every way I can imagine to get them into PS short of turning them into tiffs. I do not want to save as a tiff, as I really like the tools in PS Raw, especially the exposure tool (I am no great photographer but I have some very special and irreplaceable pics form fieldwork overseas which are ahem errr not quite correctly exposed).
My ideal worflow is open folder in DPP - star rate the pics I want to work on. crop them (nice to do this in DPP as it is part of the selection process) then get them into Camera Raw without any more effort, then if an image can be tweaked - do it as a Raw, if it needs more work - get it into PS6 as a tiff and go from there. This seems to minimise effort and minimise file space, at the expense of having two different file types.
is there a better way to review 300 similar pics and get the best selected and processed? I have PS6 with raw 7.3.
batch processing Camera RAW files in PS CS3 on a Mac.
I select the files in Bridge which are cropped, and the action I've created resizes to web resolution and saves as a JPG.
But when the files are processed, the images are not cropped, but full frame.
I want to shoot RAW images on my digital camera but I'm at a loss when it comes to how to edit RAW files.
I don't really want to use the RAW software that came with my camera but have read somewhere that you can edit RAW files in Photoshop. I have Photoshop CS but can't figure out how to use the RAW plug in.
Would the Photoshop CS RAW plug in work in the same way as the RAW shooter software I got with my camera? I mean if I used the Photoshop RAW plug in it's not going to compress my images. The reason for shooting RAW is that they are like a digital negative.
I have read in numerous articles that I can open jpg files in ACR from within Elements 11. They all state to go File>Open, then browse to the jpg you wish to open, select Camera Raw from the file type and select the jpg. When I select the Camera Raw file type then all the jpg images disappear in the selection area or if I click the jpg first and then select Camera Raw and open then it says file not found. Am I doing this wrong or are the articles I am reading incorrect?
View 4 Replies View RelatedI have PSE 11 and it will not import Canon RAW files directly from the camera. It only "picks up" the jpg files. However, it does recognise Canon RAW files which are already on my hard drive.
View 12 Replies View RelatedPhotshop Element 11 does not recognize the RAW files from my camera what do I need to do?
View 6 Replies View RelatedI just upgraded my camera from a rebel xt to a T3i and now I am unable to open RAW files.
I am using PSE 5.0.
camera raw 7.0 don't open raw files from canon 5dm3, and i can't apdeit camera raw because ACR6.7 not installed.
View 2 Replies View Related I recently bought a Canon 5d mark iii camera and am having difficulty viewing the raw files on my Mac. The Mac operating software is 10.5.8 and the mac doesnt have intel. Photoshop software is CS3.
I have looked at various plug ins but am struggling to find one that will work. Is there no option to me other than buying a new laptop with the latest photoshop or is there a workaround
I need to know how to get Photoshop CS5 to read Raw files from my new Nikon D600 camera. I do NOT want to have to buy another version of Photoshop or have to buy Lightroom.
View 3 Replies View RelatedI am not able to see or open Raw files from my Canon 40D in either Photoshop CS3 or Bridge CS3. At first I was able to open RAWS in Photoshop and then I followed directions on the internet at how to manually replace a Camera Raw Plugin so I could open it in Bridge and now neither of the apps work with RAW. In photoshop It says that the file is not supported.
I looked up what plug in I needed and it said 4.2 for a Canon 40 D. I also followed the instructions in the read me file that was with the plugin download. No results from it. I even tried to switch it back to the old plug in to see if I could atleast get back the capiblility of opening it in Photoshop even though bridge was not working...still can't open it in either. What am I missing?
I upgraded to Photoshop CS6 from CS5.X and I can not open RAW files in Camera RAW for my Nikon D800. It functioned properly in CS5 with the latest RAW release but won't work in CS6.
View 2 Replies View RelatedI want to create a batch action that will process raw files by setting their workflow resolution option and image settings in camera raw. I can create a batch action by recording an open command for a raw file, setting the workflow resolution and image settings, and then stopping the action recording.
This creates an open action which captures the resolution , images settings instruction , and other settings for camera raw, but it also captures the camera model and workflow options are specific to a camera model. If I then use the action on multiple raw files from different cameras, raw files from the camera specified in the 'open' step will get processed as I want, but raw files from any other camera model will get processed with whatever workflow resolution option was used the last time I manually opened a file from that model in ACR.
I tried recording an 'open' step by bringing raw files from 3 different cameras into ACR and selecting to open them in photoshop, but that created three 'open' steps, one for each camera model, in the action. Running that action produced three versions of every image from every camera model. No good.
How can I create an action that will set the workflow resolution option based on the camera model, when images from different camera models are being processed in the batch?
I am using PSCS5 and ACR 6.7
When I try to import photos from a camera or files I get this message The ODBC data source reported the following error: (internal error;data not found)
Why am I getting the error message and is there another way to import?
I just bought a Nikon D7000 camera & need to convert Nikon RAWS (NEF) files & they are not recognized by my Adobe CS4 on my Mac 0sX 10.6.8
Do I need to update to CS5 or CS6. Also, would like the new software to allow me to still convert older pre-existing RAWS that are in my photo archives.
I have been using Adobe Camera Raw (ACR) with my Canon EOS 30D, an 8 MP camera, for a while now. I would make non-destructive changes to the raw file (.CR2) in ACR where the changes would be stored in an adjoining .xmp file. Jpegs of the unedited and edited camera raw files would be created so I have a before and after versions of the images that can be viewed anywhere.
Now I have a Canon EOS 5D Mark III, a 22 MP camera and the raw files are much larger. I’m looking at using camera raw on jpeg files for some for my more casual photo shoots in order to save disk space. From what I have read, I can use ACR on jpeg files and that the changes would be stored in the metadata in the jpeg file. Is there a way for the changes to be stored in an adjoining .xmp file so that the original jpeg file is not modified, much like it is done with the .CR2 files?
I am using Adobe Photoshop CS5 on a Windows 7 machine. All software is up-to-date.
Also, I have found that Adobe’s camera raw handing is different than the raw handling of the photos using Canon’s software (DPP). Is there a way to make ACR closer to what Canon’s software does?
How can I open a NEF file from NikonD800 in photoshop CS5 Windows, camera raw plug in version 6.7.0.339? same problem for CS5 MAC, camera raw plug in version 7.0.0.308?
View 4 Replies View RelatedI cannot open new files from Photoshop CS6.
I have to go outside of the program and open them by dragging the file onto the dock icon. This means I cannot open any of my digital camera files (transferred into Nikon Transfer into "Pictures") from the program. So, I have to go 'outside' of PS, and then back in – and this eats up a good deal of time, and this latest version isn't as quick as it used to be.
Sometimes, it won't even let me open a file I'd worked on only a few hours before. Again, I can open them 'outside' PS, but I keep getting this error when I try to access them from via command-O:
"Could not complete your request because of a program error."
I've reset the defaults twice. Fresh operating system. Clean user account.
My normal workflow consists of opening RAW files in ACR, making adjustments, then moving on to Photoshop where I apply retouching and build clipping paths. I then save the file as an 8bit TIFF. I rarely reopen these 8bit TIFFs again, but when I did so recently what I encountered was not what I expected.
My Photoshop (CS6) is opening 8bit TIFF files as Camera Raw when selected by "right click" followed by "Open with Photoshop CS6". I remember being able to open 8bit TIFF files directly in Photoshop, but I think this change has occurred since installing CS6.
Again, files in question began as 16bit Raw files, but were worked on in Photoshop CS6 (retouching) and saved with clipping paths. This would reduce them to 8bit files. When placed in page layout, clipping paths work properly, confirming that paths are intact.
When I want to open the files again - say from Bridge or a Finder window - by the method "right click - Open with Photoshop CS6", the file is opened first in Camera Raw, and then in Photoshop, and the path(s) is missing.I can open these TIFF files and access Paths but only if I locate and select the file from within Photoshop (File/ Open.../). The Open window gives "Format" as Camera Raw (which it isn't, having been saved as 8bit file). If I override format to "TIFF", the file opens with clipping path shown.