Is there a way to select a portion of an image and display the average RGB or Lab values of that area? Right now I can only see the values of selected individual pixels. Instead of manually adding up these values to get the average value which is quite tedious, can someone help me to a better option?
View 9 Replies
Is there a way to select a portion of an image and display the average RGB or Lab values of that area? Right now I can only see the values of selected individual pixels. Instead of manually adding up these values to get the average value which is quite tedious, can someone help me to a better option?
View 4 Replies View RelatedAs the title points out I need to find an average of the L, a, b values from a region of a photo. I can find out the values for a single pixel but these values vary to some degree in the region I am interested in. If this can not be done in photoshop but in an other program i'd be if you could show me how.
View 8 Replies View RelatedI need to analyze an image and read the value of each pixel, exclude the highest and lowest values (perhaps anything less than 10,10,10 and greater than 245,245,245) , then average the remaining. I may need to do this on each channel of RGB.
I can almost get a result blurring the sample and then using a large brush with the info tool, but is there any other method more direct and all inclusive?
I am having trouble using the beam and column calculator in Autodesk Inventor. When I choose the beam that I want to test all the dimensions are not being put in automatically.
This is happening with most types of beams that I import from the CC the angle (6X3-1/2X3/8) that I am trying to test is getting no Wx, Wy, Wk or Jk. and the I beam (W6X25) is not getting Wk and Jk.
Let's say a have an image mask (see image shown below) where the white areas are the selection islands and then apply that to an image. What I want to do is get the average color for each selection island in that object. Just blurring gives you a gradient effect and if you blur too big, you just get a single color. That's not what I want.
[URL]
Is there a way to change an object's fill from a gradient to a solid color that is the average of that gradient? What I want to do is have a grid of squares, select them all and apply a colorful gradient to them as a whole, and then average each square's color so I end up with a pixelated look. Kind of like the mosaic filter in Photoshop, but in vector.
View 3 Replies View RelatedSo I am measuring the 'red' 'green' and 'blue' values of a picture after I adjust the white balance with a grey card.. I notice that if I measure the colors from 'selected layer' they are different then if I select 'entire image' those are both different if i do not do any white balance adjustment..
Which is the correct measurement that I should record? I want the the white balance adjustment included.
I have a photo of an object on a black background, and during the editing process the cmyk values of the black background are c=75 m=68 y=67 k=90. As this image is to be placed on a business card, if it is possible to change the values to 100% K or 40% C 100 %.
View 3 Replies View RelatedAbout color lab color correction, in those days i'm watching a lot of tutorials about cause i'm trying to understand this new to me subject in a better way.
While neutralizing color, correcting a photo in Lab by Curvas adj Layer, the default eye dropper values are:
Black- 0, Gray- 128, White- 255 RGB (0-54-100 Lab)
To prevent the possibility of out of gamma some tutorials suggest to change the above mentioned default values:
Black from 0 to 26 RGB (0-6 Lab), White from 255 to 243 RGB (0-96 Lab)
What about the middle eye dropper Gray? A few tutorials mention to chage the gray value too from 128 to 133 RGB (54-56Lab) while the majority never mention gray value, they tell about black and white never mentioning the gray value; what is your experience about?
The above mentioned "out of gamma problem" is mainly related to output printing or to screen displaying too?
Generally speaking I would like to receive some comment by you gurus about this very subject, while working in Lab, what about your Curvas adj Layer eye dropper values, do you change them or you leave them as default?
I have a selection or a layer of which I want to tweak the color. I use my color sampler to read the RGB values from my "source". How can I apply those values to my selection/layer ? If I use a color fill, I lose all detail in my original.
View 3 Replies View RelatedIs there a way to select pixels in Photoshop based on given Lab values? I am using Select --> Color Range with a specified "fuzziness" threshold, but I'd rather make the selection based on specific Lab values instead of random pixels that I choose with my eye dropper. Is there a way to do this in Photoshop, or does anyone know of a plug-in that might do this?
View 6 Replies View RelatedI have an illustrator file made by someone else. They made swatches for different background colors. I want to get the Hex values for these colors so I can replicate them in a web page. I just can't seem to do it. I'm getting
The layout of the file is essentially a bunch of little boxes (it's a periodic table). I click on the swatch panel and it tells me something like "unamed Swatch 3" but I can't seem to get how to find out exactly what values those colors contain.
I'm using Illustrator CC and am new to Illustrator altogether.
I'm working in Photoshop CS 5.5 on a Mac, and I want to apply a specific CMYK color to a selection in an image. I create the color with the values C=0, M=100, Y=100, K=10 and add it to my color swatches. Then I select the section of the image where I want to apply the new color and fill it with the paint bucket. The color fills the section just fine and life is good. But then when I roll over the section with the eyedropper to double-check the CMYK values in the Info window, it shows that they've inexplicably shifted to C=9, M=100, Y=100, K=1.
View 4 Replies View RelatedI'm using a Canon 40D, Photoshop 6 and a Mac Mini running OSX 10.8.4.
I'm loading a RAW image from my Camera into Photoshop in 16 bit mode. As I understand it, my Canon 40D has a 12-bit A/D and RAW images have a 12 bit depth out of the camera. Loading them in 8-bit depth would lose some dynamic range/resolution, so I choose to load them in 16 bit mode.
Once the RAW image is in Photoshop in 16 bits, I scroll over parts of the image with the color picker to see the pixel values. This is where I lose understanding of what's going on. The color picker shows pure white values as 32768 and pure black values as zero. Apparently Photoshop (or Camera Raw) is shifting the 12-bit camera data up to fill the top 16 bits in Photoshop. But this is not entirely true! If it truly shifted all 12 camera bits into the 12 MSBs of the 16 bit Photoshop value, wouldn't the max white value be 65535?? If the 12 bits were shifted into the 15th bit, wouldn't the max value be 32767?? Where does 32768 come from? Also, what is Photoshop putting into the LSBs after it does the shifting?
I'm trying to do some averaging of lots of low light exposures using Linear Dodge in 16 bit mode. If photoshop indeed shifts the 12-bit camera values to the MSB of the 16 bit word, I'll eventually run into clipping when I sum my images. I'd have to go to 32-bit mode and that really slows down my system, almost to the point of uselessness.
What's going on in 16-bit mode?
I recently installed Paint.net (love it!) and was messing around with effects and colors when I stumbled upon this one adjustment/edit . That allowed you to select several colors and make a a threshold and other cool effects with only the colors you selected previously. I thought it was really cool, but I didn't save the photo.
View 1 Replies View RelatedPS CS 5.5.I want to replace color with a particular R,G,B value, but PS insists on some sort of difference setting that is not standard. Clicking on Final Value in the Replace Color window and entering treal values there has no affect, or has some seemingly arbitrary effect.
View 3 Replies View RelatedOn opening Elements 2, foreground color is white but changes to yellow if a file or image is opened. Checked hexadecimal values and they are the same. Operating system is Windows XP.
View 3 Replies View Relatedhave a color vector King of Spades card?download link?
View 2 Replies View RelatedIs it possible to make the color sampler tool show hsv values in the info panel instead of rgb?
View 10 Replies View RelatedAs long as a cmm is set up it is not possible to me to measure the same color value on screen (with an external color picker) that I entered in Corel's color definitions. This only works, when I turn off any cmm in Draw.
Plus it is not possilbe to export a pdf in which I can measue the RGB values that I defined in Draw. The closest I get is without a cmm (see above) but I still get readings that are off by 1 in most cases (I don't figure why rounding issues should be acceptable here).
The only export that works for me is to export for "Office" .. only then all values are exactly how I had defined them.
I have a file from a client that has a table with the color values recorded as CMYK. (e.g. 50, 0, 10, 0)
I'd like to display the colors but I can only figure out how to do it if it's in the 256 color format. Is there a way for me to convert CMYK color values to a 256 color value. I realize the hues/colors won't be perfect, and I'll be happy with colors close to what the original data was using. Maybe there's a way to go from CMYK to RGB, and then to 246?
If there is a way to make Outline Same as Fill - is there a way to Transfer color values from object to another?
Select object you want to change THEN select object with color you want - hit button and it transfers?
what the technique is called when you swap the values of two of the colors within a selection?
For example, let's say that we have a nice pinkish color for something... but you don't want pinkish. This would keep things looking relatively nice, simply by swapping all the red values with the blue values, giving you nice lavender-ish color instead. Or perhaps swapping blue with green values, giving you a more orange-y color.
I've been placing photoshop tiff files into Illustrator, and doing this seems to change the color values, when I sample them with the eyedropper tool. The images I made use a custom mix of CMYK rich black, with the K set to 100. In Illustrator, they appear to revert to the default 'Photoshop black", approx C75 M68 Y67 K90. This is not my intent of C70 M60 Y58 K100. The Illustrator document is CMYK mode, and I don't know why this is happening. The non-image items (vectors) in my illustrator file DO retain the color values I intended, however.
Is this some kind of setting I can change in Illustrator? Will this discrepancy show up when this file goes to print?
I have some c# code (though it could be any language) and I am trying to copy the colors used therein into an Illustrator design.
Here's the code:
private static readonly Dictionary<string, SolidColorBrush> _DefaultModeColours = new Dictionary<string, SolidColorBrush>
{
[Code]....
The colors are specified using hexadecimal numbers for the ARGB values.
In Illustrator I have the following color chooser:
I could fire up a calculator and convert each of the (nonobvious) hex values into decimal, but I imagine there is an easy way to change the Illustrator settings for the document to use hex values. Is there? If so where do I set it?
I'm trying to show, using the eyedropper tool, the actual values of pixels in an 8-bit grayscale image (Mode command confirms that's what's there). In the Info panel, the eyedropper tool displays percentages for every type of color information (K, CMYK), while the "8-bit" field remains blank.
View 9 Replies View Relatedhow can I export the Color Scheme Values List.
I do not want to Transfer Between Projects. Just want to have it as a list so that people can follow what Room names are available for use.
Revit 2014
AutoCAD 2014
I have a plain rectangle with overall c09300c0 RGBA levels.I want to change the alpha channel value from c0 (193) to some other value, for the whole image at once. Or some other color channel.
How can I change the absolute value of a channel ? The color menu has only relative adjustments.
I'm running Design and Web Premium CS6 on a Windows 7 machine. I was recently using Ai's Recolor Artwork dialogue for a CMYK document. I wanted to convert my 4 color artwork to Pantone solid coated. I decided to chose some different Pantones. In older versions of Illustrator I could easily open the Color Picker, click on a Pantone value and then just type in a new value to scroll to it. This is no longer the case with Ai CS6.
View 3 Replies View RelatedI am using Ai-CS5 SDK to create a plug-in. In which I need to get the all link(image), color, font used in document.
Let's say a document having some images(linked not embedded), using 3 fonts - Arial, Times New Roman, and Impact, and using color- CYMK + Red + Violet.
I need to get these value.like-
links -
1 - c:abccde1.jpg
2 - d:mno2.jpg
fonts-
1. Arial
2. Times New Roman
3. Impact
colors-
1. Cyan
2. Yellow
3. Magenta
4. Black
5. Red
6. Violet
can we do so using APIs?
