I'm having trouble even figuring out how to begin this process. What needs to happen is that the last two columns of this pattern:
And copy them into this picture...so that this image essentially becomes an extension of first image:
I'm using Photoshop CS3 on a Vista Enterprise Edition box.
I have attached a picture that gives a good reference to what I would like to do, simply put - i have taken the background out of a picture but I just need to extended the empty background to the left so i can add a logo there.Â
View 1 Replies View Relatedwhen you are zoomed out and you see the grey area around your canvas so that you can start gradients out in that area. Well, when you are zoomed in you can't extend into that area.
View 8 Replies View RelatedI'm working on a flyer on a 8x11 canvas, but I want all of the elements I'm working to be transferred to a NTSC video film format. I understand how to a open a NTSC (Video Film Canvas), but I do not understand how to convert a canvas that I'm working to that.
View 1 Replies View RelatedI just got CS5.1 at my job. This must be a preference, but when I adjust the Canvas size, it will constrain the image, rather than cropping the canvas. The Anchor in the Canvas Size menu appears outlined (highlighted?) which indicates that this is something in preferences that I can adjust.
View 2 Replies View RelatedWhen I go to create a File/New Canvas, sometimes the canvas area shrinks a lot.
Is it possible to keep the original canvas size ?
I know there is a way to change the size of the arrows, I already did it and made them bigger and I forget how to make them small again...
View 1 Replies View Related1. How do I connect, collapse and disconnect windows (tool bar, property manager, etc.)? They get stuck together and I can't unstick them. Â
2. What's the difference between canvas size and image size? Â
3. Which tools are only for web design (i.e. tools I can ignore if I'm not doing that)? Â
4. What's the subselection tool do? Â
For Photoshop: Â
1.Why is the original layer always locked?
2. Whats the name of the property inspector in PS? And is it called inspector or manager in FW?
Can someone please explain to me about file sizes and image dimensions. I have to put together a collage which is 165mm high by 258mm wide. If I click file new and choose default resolution (72) then the file size is ok, if I type in 300 dpi the image becomes huge.
If i chosse 300 dpi then the images I was going to use seem tiny on such a vast workspace - Im confused why does the canvas become so large when changing resolution?
I have a created a new PSD that is 8 1/2 x 11.The canvas size is the same 8 1/2 x 11.I want to put a border around the picture (say 1/2 of an inch all around), and put the finished picture in a Picture frame. After it is in the frame, you would be able to see the entire picture plus the border. Q. Should I change (reduce image size) of the PSD to (for this example), 8 x 10 1/2.     Then increase the canvas size to 8 1/2 x 11. After I increased the canvas size, do a Paint Bucket fill with white (to create the White border)? then print the changed size PSD on 8 1/2 x 11 paper so that it will fit into a 8 1/2 x 11 picture frame I realize I could have just created the new PSD to be 8 x 10 1/2 in the first place.
View 5 Replies View RelatedIn photoshop 7, I create a graphic. But most of the time the default size of the canvas is bigger than the graphic. How can I "snap," the canvas size to the picture size?
View 2 Replies View RelatedIf one drags a layer from one image to another while holding shift, the layer will be placed in the center of the canvas it's dragged to. What I want to do is just move a layer to the exact center of the canvas. I have in the past, when deperate, done so by moving it to a different image and then back while holding shift.
View 1 Replies View RelatedI try to select and move a layer using the Move Tool, another layer is immediately selected and moved instead.
Also, if I have layers inside a folder and try to move one of those layers, the entire folder is selected and all layers within that folder move.
I have not grouped any layers together.
I'm using Mac OS 10.4.8 with PS 9.0.1
I've just reduced the size of a canvas from 300x300 to 200x200 but when I merge the layers I'm left with a dotted line showing the original size.
reduced canvas size.tiff (128.61K)
Number of downloads: 3
If I drop a layer so that part of it is off the canvas, the layer will move back to the place that i dragged it from.
Is there any way to move a layer so that part of it is outside of the canvas?
When I move a canvas around the screen, if I take it too near the top it will snap to the top of the screen and take up the whole page with just this one canvas. How do I stop it from doing this? I guess its in options somewhere but as I dont know what its called I dont know what to search for? Also how do I stop one canvas snapping into another/tabbing into another when moving them around?
View 1 Replies View RelatedI played with the feature a bit and understand how to create the patterns. Problem is when I go to fill in my 12x12 space there are seams. I have chosen different sizes in the pattern window but all show up with seams when I fill the larger space. Am I doing something wrong or is the largest size you can create with this tool seamlessly only 9x9?
View 8 Replies View RelatedI am using the trial version of CS5 (probably going to upgrade at the end of the trial), and I've only found one thing about it that I don't like more than CS3. This is VERY VERY annoying, and I'm not sure if it's a glitch, or just a preference that needs to be reset:
Â
When using the move tool, I will move something and it will just snap back to where it originally was. When it snaps back, it might move a few pixels over in the direction I was dragging, but it is definitely not moving to where I want it to go. The only way to get things to move the way I want to is by Free Transform...but it's annoying, when you're trying to design a layout, to have to free transform every element you want to move, first.
Â
I'm guessing that this is a glitch because sometimes it happens and sometimes it doesn't...it's pretty random. I've tried turning Snap on and off, and nothing changes.
Every once in a while I print that has two side-by-side images on one piece of paper. My usual routine is to create a new document that is larger than the two images--say, 10x8 (horizontal) with a transparent background and the same resolution as the two images that I'll be placing on the canvas (say, two 4x3's). Then I simply click on the image I want to move and drag it from its layers palette onto the blank background canvas, and move/edit/size as needed.
when I drag an image over to the blank canvas, it assumes the size of the entire canvas. so I just have the image... enlarged. With no background canvas. when I click on the new image (the one dragged to the canvas), all of the editing commands are grayed out. So I cannot resize or move it.I'm on CS5 (mac)
I'm using Photoshop CS5 and as you can see on the picture below, when I set my grid line to every 1 px, grid doesn't match canvas pixel size.
Now I'm not able to draw sharp shapes using pen tool because even if I hold shift key everything gets blurry.Â
My clone tool seems to have been replaced by the pattern stamp tool. How to get it back and how that happened?
View 3 Replies View RelatedI was trying to add 5mm around the canvas, when i noticed something strange.
I changed the measurement to cm, then added 1cm to each, Height and Width, then changed the Width measurement to mm (which changed both displays to mm) but only one of the setting changed to mm; the height still had the same value it had when displayed in cm.
This only happens when both Height and Width are changed.
im currently working on a project that requires a very large canvas. currently, photoshop will not create any canvas with pixel dimentions of over 30k x 30k. the only way i can currently fit my entire image is to drastically lower the image DPI, any way to change this limitation photoshop has, or if theres another program I can use to do this?
View 1 Replies View RelatedI am trying to open a new document to make a design that will be printed.Since it will be printed, I set my resolution to 300 ppi.I need my canvas size to be 6.5" by 3.625", but the canvas size automatically sets itself to 6.5" by 3.627", and I can't change it.
Â
I don't have this problem at lower resolutions
I have designed a billboard and used various photos. Due to changes in the positions of the layers, I ended up with a canvas bigger than the photo. So I need to remove the extra canvas. How do I remove the extra canvas?
Â
I can use the marque tool to copy/cut and paste the photo unto a new file, and hence get rid of the extra canvas. If this is the way forward, is there a precise way to get the marquee tool to the edges of the photo? Is there a function to snap the marquee to the edge of the photo?
I want to change the canvas size, though why is it that when I press the down arrow it adds to the canvas on top, and when I press the up arrow it adds to the canvas on the bottom? It just seems like it should be the other way around.
View 6 Replies View RelatedI go to image and then image size and everytime i go to change the canvas size to inches it will not work. Is it becasue the it's the trial version?
View 4 Replies View RelatedUsing CS3, is there a way to make layers snap to the same size as the Canvas?
View 3 Replies View RelatedI have a strange problem when i send my photo i created with photoshop to a company to make a print.
In photoshop i create a canvas with the size of 20x30 (300ppi). I put some photo's on it so it fit almost the hole canvas. Than i have a little space for a nice border around it. Finished. Send it to a company and when i receive the photo i check the size of it. It is exactly 20x30, so that is not the problem.
The problem is that i now miss some peace of my border. So if i wanna keep the border i have to send a photo with a canvas size around 19x29.
I need to design my first template using photoshop. the content area of the web site will be 980px ( width ) ..
I like to add border to each side ( left and right ) .. i seen many sits using background image that spans the entire screen and has left and right boarder added to the background , which effectively looks like border on each side of content area.
however, i was not able to figure what would be the best canvas size for this . as each site i looked at , background was set to different size ..
my main content will be in center of the monitor .
I was just wondering what size canvas i should use to make an icon. I just wanted it to be a normal sized icon for msn messenger.
View 3 Replies View Related
