I need to engraved on a camera lens the text below. It has to look realistic. I couldn't make it work. Does anyone has a tutorial? I use PS CS2.
Text:
OFA 2006
Odense Fotografiske Amatørklub
Why won't the Lens Correction filter recognize my camera and lens, which is shown in the metadata below the correction window? I had been using the venerable Canon 5D Mk II and now the Mk III. For images taken with the III it doesn't even list Canon in the Camera drop down -- too new? Even with the II, I had to choose the camera manually and then choose the lens from a very tedious list, and had no indication if it was using the focal length in the case of a zoom, or the aperture.
I do strongly prefer to do this correction in Camera Raw or Lightroom, and realize it needs to be done on an uncropped image to be accurate. why even present it as an auto correction if it can't use the metadata? Why not just limit it to the manual correction?
I can never find those lists of lens profiles to pick from, even when I go Filter>lens corrections. I remember doing this before but cant get in anywhere. When i try to go directly with lens profile downloader, this is all i get from a newly downloaded app.
View 3 Replies View RelatedIm trying to take this picture:
(my old school Minolta X370)
And add a reflection into the lense, to make it look like it is reflecting something else, for example, a beach, or a city skyline.
Is there a way to remove the smudge from my pictures..or at least make it better?
View 3 Replies View Relateddifferences in the Camera Lens Profiles in ACR and the Lens Correction Filter in Photoshop CS6.Reason I ask is my D800 and Nikon 14-24mm lens is detected and correction applied in ACR, but the same camera and lens combination is not recognized in the Photoshop lens correction filter. The D800 is nowhere to be found. But interestingly the profiles for the D4 are
Many folks have asked in the past when the D800 and Canon 5DM3 would be supported but all the attention has been focussed on ACR, so when will these profiles be available for Photoshop Lens Correction?
I recently formatted my mac and now i cant find where to download the correct lens profiles to camera raw. Im a photographer and its crucial i have the right ones!!
View 2 Replies View RelatedIs there a way to simulate what is usually done with a fisheye style camera lens with Photoshop or something close?
View 2 Replies View RelatedI'm just beginning to work with Photoshop CS5. When I was editing with the camera raw features; I discovered that there had not been a "Lens Profile Correction" loaded for my Panasonic Lumix DMC-L10 with a Leica lens 14-150. I"m looking for a method to get this lens added to the Profile Connection.
View 1 Replies View RelatedCan Photoshop CS6 (Windows 8) make lens corrections for the Canon PowerShot SX50 HS camera? My version of CS6 (64bit) is Photoshop: 13.0.1 x64 and CameraRaw plug-in is 7.3.0.71. There is a file "Canon PowerShot SX50 HS AdobeStandard.dcp" size 118KB in the folder c:Program DataAdobeCameraRawCameraProfilesAdobeStandard.However when I open a Cameras Raw file (*.CR2 for Canon) in Camera Raw and go to the Lens Corrections window with (under Lens Profile) Make = Canon I cannot find my camera in the drop-down list for Model. The list has 30 items ending with Canon PowerShot S100.
I have tried removing Photoshop, re-installing it and installing the updates, but this has made no change. I have been using Photoshop under Windows 8 since early in October 2012, and everthing else seems to be operating correctly.
I'm trying to animate a camera lens to go from 11mm to 24mm over 200 frames. When I animate the lens and run the animation it goes crasy and gives me silly results.
View 5 Replies View RelatedDoes LCP work with PSE 11 Camera Raw. If so, how is it used. How is "Embedded" changed to the specific camera/lens profile
View 2 Replies View RelatedI need to add barrel distortion to a 3ds max camera.
using 2014
As you can in 3ds Max ?
We have a few site photos taken at known locations with known focal length. Can you adjust the focal length of a camera view in Revit ? I've looked everywhere, but can't find any parameters.
It's not the same as simply adjusting the crop size, some of these views are taken at wide angles - and we would like to replicate the parallax / perspective distortion in the render to make it easier to merge the images in Photoshop.
So far - it looks as though we will have to do this in 3ds Max only.
Just came back from the camera store after testing out the Nikon Coolpix P7800 and Sony RX100ii. Imported the RAW files into LR 5.3 to compare the image quality of the cameras. I noticed that I could not assign camera and lens profiles to the photos. I currently have a Nikon P7100 which does show up in the drop down list and have had no problem doing lens corrections for the older camera. I thought the P7800 and RX100ii cameras were added in the latest update.
View 8 Replies View RelatedIs there a ae type 'Lens distort' effect/node in cfx?
View 3 Replies View RelatedI recently returned from a photo trip where for the first time I used multiple camera bodies (I purchased a second 5D MII body).
When importing my photgraphs into Lightroom I find all the correct lens profiles are available to images shot with my original 5D MII body, but images taken with the new body are only presented with a default list of 15 profiles, which don't include several of the lenses I used.
I'm using LR 3.6 on Windows 7 64 bit and find that the full list of lens profiles is in the folowing folder:
C:ProgramDataAdobeCameraRawLensProfiles1.0
I also found the following folder present on the PC which had no profiles but and empty Dowloads folder.
C:UsersUserNameAppDataRoamingAdobeCameraRawLensProfiles1.0
So tried copying the profiles here but that didn't work either.
How I can correct this problem get all my profiles avalable to both bodies? I tried exporting the images to photoshop and downloading lens profiles via the Lens Correction Filter but that didn't work either.
Can I load a specific camera/lens profile into LR and if so how?
View 1 Replies View RelatedI would like to set a camera default for a D3 and D7100 -- Settings > Set Default Settings... -- to include a Camera Calibration Profile AND the Lens Correction Profile setting to Enable Profile Corrections and have LR identify which lens is in use for each file.
The Camera Calibration Profile is no problem since it's the same for each respective body, no matter which lens I use.
However, since I use different lenses, I would like the Lens Correction Profle to find the correct lens for each file. In the Lens Corrections > Profile > Setup dropdown, I am not sure whether to use Default or Auto. (Note: the default is Custom, but when I tried that, the D3 lenses were not correctly identified whereas the D7100 lenses were.) I am not sure what the difference is between the Default and Auto settings. I want to be sure to use whichever setting will apply the correct profile, and have this be part of my camera default so that I don't have to visit the Lens Corrections panel over and over again. Note: I only shoot RAW files.
I refer to Lightroom version 3.6. I have purchased a panasonic-gx1 plus 14-42mm & 45-175mm lenses and would like to add the lens profiles to the lens correction module.
View 1 Replies View RelatedOne of the great features of the Sony NEX-7 is that the NEX-7 makes automatic lens corrections for vignetting, chromatic aberration and distortion problems. These corrections are written to the file and the preview. However, when converting these images from ARW to DNG the correction data seems to be lost, and the images revert to their uncorrected state. This requires all images to then be re corrected with the Adobe lens profiles, which is both tedious, an extra step, and also seems to produce results that are somewhat less optimal than the original corrections made by the camera.
Should not the ACR Converter and Lightroom retain the lens corrections made by the camera?
I am starting to do graphic design. I know I need to get a decent camera in case a client needs pics of his business, work or whatever in the print ad. my question is what type of camera do I need and how many MP should I have without getting way more than I need.
View 12 Replies View RelatedDownloaded LR4 today and it's not showing the lens correction or camera calibration in develop module.
View 1 Replies View RelatedLooking forward to this update because i use a Fuji X pro 1 and I had read that lightroom 4.4 now supports this camera and sensor.
However after updating all I get in the Lens adjustment under Fuji is the Fuji x100 which has been their for some time.The exif info is showing the correct camera and lens used etc.
I have tried uninstalling and then manually removing any left over files and folders with no luck.
Do i have to install support for this camera as an addon?
Also if i look in the lightroom folder Camera profiles/camera it only lists Canon, Nikon and Sony
I just reinstalled CS3 on my refurbed Mac G4. When I try to open an Nikon camera raw file (.NEF), I get the error message, "Could not complete your request because Photoshop does not recognize this type of file." Prior to a hard drive crash, I opened .NEF files using CS3 on my G4 frequently with no problems. I have reinstalled the software twice and tried importing the files from the camera using Bridge all with the same result.
View 6 Replies View Relatedhow do you remove clear see through engraved lettering on a picture?
how do you insert clear see through engraved lettering on a picture?
I'm trying to simulate this engraved effect in photoshop. I have the illustartor file of my logo in which the type and box shape are two different things.
View 8 Replies View RelatedAfter downloading Lightroom 4.4 (Mac) I see only the lenscorrection for the Fuji Finepix X100 and not my camera the Fuji XE-1.
View 1 Replies View RelatedUsing CS3.
I've got text superimposed on a photo of wood in ID (Text was added in ID.) Client wants the text to look like it's engraved in the wood. I don't think I can do this in ID.
Many years ago I did something similar in PS with text on a marble background, and it took many steps to accomplish.
What's the best way to do the wood engraving? I'd like to avoid having to go through zillions of steps, because I anticipate changes in the project.
I have a new camera Nikon D7100 24 mg Pixels. Elements 10 says "wrong type of file" can not bring file into elements 10. My updates are current!
View 1 Replies View RelatedI must make photos of engraved medallions, and I was wondering if instead of having to engrave and shoot each one I could take pictures of a blank and then use a photoshop text effect to simulate the engraving.
is this is feasible and reasonably easy to do or not?
I'd like to show you what I'm trying to simulate but I apparently need 4 posts to have the right to post links...