Lightroom :: Missing Lens Profiles When Using Second Camera Body
Dec 21, 2011
I recently returned from a photo trip where for the first time I used multiple camera bodies (I purchased a second 5D MII body).
When importing my photgraphs into Lightroom I find all the correct lens profiles are available to images shot with my original 5D MII body, but images taken with the new body are only presented with a default list of 15 profiles, which don't include several of the lenses I used.
I'm using LR 3.6 on Windows 7 64 bit and find that the full list of lens profiles is in the folowing folder:
C:ProgramDataAdobeCameraRawLensProfiles1.0
I also found the following folder present on the PC which had no profiles but and empty Dowloads folder.
C:UsersUserNameAppDataRoamingAdobeCameraRawLensProfiles1.0
So tried copying the profiles here but that didn't work either.
How I can correct this problem get all my profiles avalable to both bodies? I tried exporting the images to photoshop and downloading lens profiles via the Lens Correction Filter but that didn't work either.
View 3 Replies
ADVERTISEMENT
Feb 23, 2014
Just came back from the camera store after testing out the Nikon Coolpix P7800 and Sony RX100ii. Imported the RAW files into LR 5.3 to compare the image quality of the cameras. I noticed that I could not assign camera and lens profiles to the photos. I currently have a Nikon P7100 which does show up in the drop down list and have had no problem doing lens corrections for the older camera. I thought the P7800 and RX100ii cameras were added in the latest update.
View 8 Replies
View Related
Aug 14, 2013
After upgrade from LR4 to LR5 I have lost most all lens profiles.
View 9 Replies
View Related
Mar 6, 2012
Why so litthe of them so far? When will be updatet to at least L3.6 amount?
View 4 Replies
View Related
Feb 6, 2014
I have Lightroom 3 and just this morning noticed that all of the preloaded lens profiles are missing. I've been using the program for 3 years now and they've always been there previously. The only one available is SIGMA. I have a Canon, so all of those are gone. At the bottom of the box in "Develop" it says "Unable to locate a matching profile automatically."
I am running on Windows and tried repairing, but it seems to be missing the installation file that it needs.Is there a way to download and install the profiles for just the lenses I have? Or, do I need to completely re-install? If that's the case, will all of my libraries stay in tact?
View 1 Replies
View Related
Mar 12, 2012
I shoot RAW with a Canon 5D Mark II. I am using Lightroom 3. All of the sudden I can't find my camera profile settings in the Develop Module under the Camera Calibration Panel. They used to be there and now they are gone. "2010" is selected under the Process bar, but only Matrix shows up as my available Camera Profiles. What did I do to make them disappear? I can't think of anything that I could have done. Haven't done much except edit photos and now my profiles are missing! How can I get my camera profiles back?
View 6 Replies
View Related
Nov 28, 2011
I have this message when I start Lightroom 3 (roughly translated from french) "Missing camera profiles : some of your camera profiles are missing, that may alter the rendering of your raw files. Reinstall lightroom to restore them."
I did try to reinstall LR3 but without success. I'm with Lightroom from v1 an did upgrade to v2 then v3. I remember that I did remove a folder in the lightroom folder that I thought to be related to LR2 after upgrading to LR3. That's probably when the problem starts to occurs.
what are these missing files and how should proceed to restore them ? Where they installed by an older version ? I'm shooting with a D80 DSLR.
View 7 Replies
View Related
Dec 9, 2012
I can never find those lists of lens profiles to pick from, even when I go Filter>lens corrections. I remember doing this before but cant get in anywhere. When i try to go directly with lens profile downloader, this is all i get from a newly downloaded app.
View 3 Replies
View Related
May 24, 2012
differences in the Camera Lens Profiles in ACR and the Lens Correction Filter in Photoshop CS6.Reason I ask is my D800 and Nikon 14-24mm lens is detected and correction applied in ACR, but the same camera and lens combination is not recognized in the Photoshop lens correction filter. The D800 is nowhere to be found. But interestingly the profiles for the D4 are
Many folks have asked in the past when the D800 and Canon 5DM3 would be supported but all the attention has been focussed on ACR, so when will these profiles be available for Photoshop Lens Correction?
View 5 Replies
View Related
Oct 24, 2013
I recently formatted my mac and now i cant find where to download the correct lens profiles to camera raw. Im a photographer and its crucial i have the right ones!!
View 2 Replies
View Related
May 31, 2013
In LR 4.4 lens correction profiles works fine for my Canon 70-200 f/4L IS USM, but when I use the Canon Extender 1.4 III with this lens there is no correction profile available.How do I obtain a profile covering this?
View 3 Replies
View Related
Jun 26, 2013
I use LR 4.4 (Windows 7, 64-Bit) and i missed unter DEVELOPMENT Lens Adjustments my Nikkor 70-200mm 1:4G ED, only the 70-200mm 2.8 is available. I hope that with Adobe Lens Profile Downloader this could be corrected, but on the download instructions i see that Adobe Air is necessary. This I do not understand. Do I have to buy first Adobe AIR?? Or would it be better to Upgrade from LR 4.4 to LR 5?
View 2 Replies
View Related
Nov 29, 2011
After upgrading to LR3.5 it seems that the lens correction lost some profiles (in particular 18-105mm f/3.5-5.6 Nikon). It used to show this profile previously. I checked the file system and the profile(s) are in '/Library/Application Support/Adobe/CameraRaw/LensProfiles/1.0/Nikon' as expected. Any thoughts to tell LR to show them to me?
View 2 Replies
View Related
Aug 5, 2013
I'm trying to work out the optimal workflow for doing HDR (using HDR EFEX 2) on a set of images. I can apply LR's Lens Correction (Nikon, 17-55mm F2,8) and chromatic aberation removal on the whole set set (using LR Sync) before I export to HDR - then turn off the Chromatic Aberation fix in HDR - and that gives me one workflow.
However, that makes a lot of changes to the TIF's before I go in - so I am wondering if it would be better to export the RAW files converted to TIF using minimal changes from LR e,g, no CA fix or Lens Profile correction; let the HDR do its thing and then make profile corrections, Upright, etc upon return from HDR. However, when I get back from HDR and go into Develop with the returned file and go to Lens Correction, I cannot chose the 17-55mm F2.8 lens from the drop downs. There are only about 4 or 5 lenses now showing as Nikon possibilities-and the 17-55 is NOT among them.
How come I don't still see the full list of Nikon profiles - shoudln't I be able to apply any profile to a TIF (even an incorrect one) ?
I tried pasting the Develop Settings from a virtual copy where I had set the Lens Profile to 17-55 F2.8 - but that only turns on the Lens Profile 'filter' and does not actually force-on the specific correction.
View 1 Replies
View Related
Aug 26, 2012
When I use Lightroom 3.6 with pictures from Nikon D800, the lens profile for the Mikro Nikor 60 mm lens is not in the list of coice. However, when the picture is from a Nikon D5000, the same lens appears in the list. So, a lens profile exists, but is not open for pictures from the D800. The same is true for the 18-200 mm lens, which however is not suited for the D800 due to heavy vignetting at wide angle, and with the 70-300 mm, which gives good results.
View 5 Replies
View Related
Jul 4, 2013
Can you enable the lens profile settings for more than one image at a time? If multiple images were imported and the same lens was used for all of them can you batch process them without having to do one image at a time?
View 1 Replies
View Related
Dec 14, 2012
I have a couple custom lens profiles as lcp files. They worked in LR 3 and LR 4.2. But, even though I copied the folders with the lcp files into C:Program Files Adobe Adobe Photoshop Lightroom 4.3 Resources Lens Profiles 1.0 LR 4.3 never finds the profiles.
I need to be able to apply these lens profiles (they are for my Rokinon 7.5 mm Fisheye lens).
How can I get LR 4.3 to 'find' them?
View 3 Replies
View Related
Aug 5, 2012
I'm using Lr 4.1. I'm processing raw from a NEX 5 and a NEX 7. Under Lens Correction - Lens Profile - e50/1.8, e24/1.8z, and e18-200f/3.5-6.3 are not listed. I assume profiles for these lenses exist somewhere. Where I can download profiles for these lenses and tell me how to get them into Lr?
View 3 Replies
View Related
Jul 28, 2013
I've installed Adobe Lens Profile Downloader and found the lens I'm after but just can't download. The "download" button remains grey and unusable. I'm using Lightroom 3.
View 3 Replies
View Related
Apr 15, 2013
LightRoom and Camera Raw have profiles for Lens Correction and all the current available lens are in the list for the Canon 6D raw files. BUT the Filter/Lens Correction when in Photoshop CS6 only have 2 Tamron lens listed. Odd that there are lens profiles for the Canon 6D raw files in Lightroom and Camera RAW but not CS6 Filter/Lens Correction.
Camera RAW, LR and PS are up to date..... NOTE: I have a Canon 7D, G11 and 1D Mark II N and all their files work as expected. It's only RAW files created by the Canon 6D.
View 2 Replies
View Related
Sep 5, 2012
I have installed LR 4.2 RC but when I check Lens Profiles these lenses are not listed although ACR 7.2 is supposed to be supporting them. Where I can get the profiles for these lenses and what is the proper procedure to install them?
View 4 Replies
View Related
Sep 6, 2012
I'm trying to import images shot on a Canon 650d using two different lenses, the (according to EXIF displayed by LR) "EF-S18-55mm f/3.5-5.6 IS II" (kit) lens and an "EF-S55-250mm f/4-5.6 IS II". Both lenses and the camera should be newly supported with this RC.
When I go to develop module and tick "activate lens corrections" (translating, I'm using the German version) nothing happens. No corrections are applied. I need to additionally change "Manufacturer" from "none" to "Canon", then the right lens is automatically found and the settings are applied.
However, if I save this as an import-standard (press Alt+"set standard"), just this lens is remembered: All imported images get corrected using the last selected lens profile. So if I manually correct an image taken on the 18-55mm lens and save this as default, at the next import all images, including those taken on the 55-250mm lens, get corrected using the 18-55mm profile (at least, that's what LR is showing me.)
It was my understanding that the import preset should be specific not only to the camera, but also to the lens the respective image was shot with.
View 4 Replies
View Related
Apr 2, 2012
I downloaded LR 4.1 RC today. Some of my lenses are not profiled in LR so I then downloaded Lens Profile Downloader Preview 3 to see if there are any profiles available for download. For some lenses I found profiles, but they were not done on the same body that I have (same sensor size though). Can I use profiles for lenses if they are for a camera body that is different than mine, but still the same sensor size? My understanding is that wiht a lens profile LR will automatically correct distortion, vignetting, and CA. Will that work if my body is different than the body used to profile the lens?
View 3 Replies
View Related
Apr 21, 2012
Recently bought into the m43s system because of the compact fast primes (Lumix G 20 1.7 and Olympus 24 1.8) and it looks like there are no "built-in" lens profiles for either in LR4 when I check "enable lens corrections". I thought I read somewhere that the 20 1.7 requires correction as it has a significant amount of (barrel, iirc) distortion if not corrected, yet the RAW images look fine upon import -- is Lightroom doing something that does not require a profile?
View 1 Replies
View Related
Jun 4, 2013
My lens profiles in the distortion correction list are small. I looked at the official list and mine is not right. I only have one Tamron lens profile. Nikon and Canon only have about 6 lenses each. What gives?
View 2 Replies
View Related
Dec 16, 2013
Rather than manually applying lens correction profiles to images by each time having to correct one image and then sync with the rest, I would like LR 5 to automatically apply the appropriate lens correction (either by EXIF info or "default" profile) when importing from the camera (card).
View 3 Replies
View Related
Sep 30, 2013
How to I get camera profiles into LR 4 and Camera Raw?
View 3 Replies
View Related
Apr 7, 2014
I am relatively new to Lightroom. I have imported Panasonic Lumix DMC-FZ200 raw (.RW2) files into Lightroom 5.3. When I go into the Develop module under the Camera Calibration the only profile that shows up is Adobe Standard. My camera is supported according to the Adobe web site.
View 2 Replies
View Related
Dec 16, 2012
After installation of LR 4.3, my custom camera profiles are no longer recognized. They are still in the correct folder along with the other camera profiles installed by LR but these custom profiles are not shown in the drop down list in the Camera Calibration panel.
View 3 Replies
View Related
Jan 30, 2013
how a raw file looks in LR straight out of the camera using the Adobe Standard profile.
and this is how it looks with the profile set to Camera Standard. It seems as though the Adobe Standard profile is clipping the green channel in the magenta shades for some reason.
Clearly switching to another profile will solve it but my presets often set the profile so it's a bit of a nightmare.
View 6 Replies
View Related
Mar 27, 2014
I don't know how to create camera profiles in Lr though I've been using it for years.
View 4 Replies
View Related
