I previously used Photoshop CS3. I do catalog work and we do quantities of paths around circular buttons and pins. CS3 would make a path around the button drawing from the center edge of the image while dragging across the item. CS6 doesn't appear to do this and only wants to draw the circle from a corner point where the top and left edges would meet for example. Can the ellipse tool be set to draw from center edge as CS3 did?
View 8 Replies
I have 2 layers, the first is the background layer. Then 2nd layer has a picutre that I have used the ellipse tool on. My question is how can I use the eraser tool on everything outside of the ellipse tool? I can only use it inside.
View 1 Replies View Relatedwhy my ellipse tool doesnt work. I used it the other day ( to draw a cirlce, obviously!). I had set the shape to be a fixed size (675 by 700 pixels) and clicked on the canvas to create the shape. This worked fine but when i went to use it again it wouldnt work. It allows me to select the tool and when i click and drag on the canvas a new layer is created but no image appears. I've tried the obviuos; putting the layer on top of all the others, checking the settings (opacity etc) but nothing seems to work.
View 2 Replies View RelatedI am trying to make a vignette with the ellipse tool. I only get the selected ellipse black,and cannot figure out how to change it.
View 11 Replies View RelatedI would like to draw a Circle with the Ellipse tool and then add a Vector Mask
next i would like to Duplicate the layer and then select the Vector Mask Thumbnail in the layers panel so that when i select the Pen tool the Intersect Shape Areas is available
however, i cannot seem to get the Vector Mask to be available it is always grayed out no matter what i try to do.
i am trying to add a "glossy" effect to the circle by using the Pen tool to draw a shape through it horizontally and then up and around the top of and joining/closing it so that i can add a white>trans gradient.
Using Ps cs6 and Windows 7
Is it true, with CD Essentials i do not have a 3-point ellipse tool?
View 4 Replies View RelatedWhen I try to draw an ellipse (or circle) and drag it on to my sheet, nothing happens. All of my other shape tools work as they should. What has happened. It worked originally.
View 4 Replies View RelatedI need to know how to make the type tool take the shape of the ellipse I am typing in.
View 1 Replies View RelatedI'm trying to snap a circle created with the Ellipse tool to the grid. However, the center of the circle won't snap to the grid, it's always the edges.
My circle is 4.7mm and my grid is 10mm with 2 subdivisions. How to get the center of a circle to snap to the grid?
Every time I use the ellipse tool to draw a shape, a portion of the ellipse is missing. The missing portion is always on the lower right hand side of the ellipse. I am using CorelDraw Graphics Suite X4. I have attached a graphic showing what I mean.
View 3 Replies View RelatedI am having trouble getting the erase tool to erase part of an elipse shape in Corel Draw. I select the erase tool and click and drag across the part of an elipse that I want to get rid of (so far so good), then I release the mouse and an outline of the nib tool is left behind.
View 5 Replies View RelatedHow would I add the ellipse that is reflecting down from the top?
View 1 Replies View RelatedHow do I draw a rectangle or ellipse as a line without fill in Photoshop Elements?
View 4 Replies View RelatedI am trying to create a cylinder. To accomplish this I am creating two ellipses and two lines. After I try to insert them in the DWG dwaing I can see only the lines. Here is a code sniped so you can see what am i doing.
Double ellipseRadiusRatio = 0.4; Vector3d ellipseMajorAxis = new Vector3d(0.0, 1500.0, 0.0);
Vector3d ellipseLeftCenter = new Vector3d(72541.7, 80198.5, 0.0);
Vector3d ellipseRightCenter = new Vector3d(77145.7, 80173.6, 0.0);
Ellipse leftEllipse = new Ellipse();
[Code] ..........
I am creating a family which uses an elliptical extrusion. However, I cannot bind the dimension of the ellipse to the parameters. How can I annotate the dimension of the ellipse?
View 3 Replies View RelatedI need to make an ellipse that's cut in half, and I have no prior 3D experience that's useful to create this shape.
View 9 Replies View RelatedI'm trying to make a (for lack of a better term) squarish ellipse.
I've tried a few things but they don't work too well, i.e. plines and lofting a rectangle with an ellipse then cutting it two but they just get me arcs that meet at sharp points.
The jpg below is meant to show what I'm trying to do.
I want to take that one quarter of an ellipse at the intersection and stretch/pull it to the midpoint of the line between the corner of the rectangle and the arc. The ellipse is made out of 4 ellipse arcs. I want to stretch just the arc without moving the ends of it at the quadrants.
how to create ellipse in autocad similar with below image? URL....
View 3 Replies View RelatedI have PSPX2 and when I select (shape selection tool) the ELLLIPSE to use on the photo, what must I do to get a border around the ellipse. I also would like to choose a border color and thickness for the border.
View 9 Replies View RelatedIt's not easy to learn how to use this program. I want to know how to draw a dotted ellipse or a circle.
View 5 Replies View RelatedI have an ellipse with equal radii, I changed it into an arc, but I can't make it fit.
In the attached drawing, there are 3 entities.
1. The original ellipse - red
2. Arc that has the same start angle and end angle as the ellipse - grey
3. Arc that fits the original ellipse - green
Now this is strange, because the ellipse seems to have a different CS for the angles. I had more ellipses in the drawing, but some of them don't have this anomaly.
Recieved a ACAD converted Microstation File for use in an upcoming construction project. Would like to convert all of the existing ellipses to polylines. Have read several threads that lead me to believe redrawing them is about the only real way to do it. Posting here in hopes of a solution. Drawing contains 127 ellipses, and I dont want to redraw all of them!!
Currently on C3D2012.
I want to create a new order. when using the order,It will create a ellipse and a DTEXT .I mean the ellipse and the DTEXT are a whole. when move the ellipse the DTEXT will alse move.However, users can edit the DTEXT.
View 9 Replies View RelatedI'm trying to put a text around a circle / arc.
I'm able to create an ellipse with the select tool, create a path from it and then add a text "along the path". Unfortunately I can't specify on what position of the arc/ellipse the text should start (left-upper corner, middle, right upper corner, etc.).
I want to use the ellipse to cut out a section of a picture. Then I want to save the ellipse so that only the ellipse is shown. Instead, I am getting a rectangle with the ellipse in it. After that, I would like to put a border around the ellipse.
View 2 Replies View RelatedI'm trying to find a way to inscribe an ellipse into a triangle (not an equilateral triangle), i.e. the ellipse touches the 3 inside sides of the triangle.
View 7 Replies View RelatedThe path array in 2012 is a very useful addition but I can't crack a solution to creating an array around an elipse (like chairs around a board room table). The only way I've found it to work is to break the elipse and then join up the gap, essentially creating a closed eliptical arc. This gets a result but it seems a very scrappy work-around to something which should simply work.
View 3 Replies View Relatedi'm using Autocad2012 now. when i use paste special in objects and give x or y insertion scale. after i do explode that object the arcs are converted in to ellipses and it come with ellipse grips. before 2012 version it won't happen. what's the change in autocad 2012? is there any variable to change?
View 3 Replies View RelatedI would like to arrange equally spaced circles around an ellipse. I understand I can do this with the Divide command, as referenced in a previous thread on a similar subject
[URL].......
But I thought I could also use the Path Array command using an ellipse as the path.
What I get is the replicated objects (small circles) following some totally random path. Strange that this happens only with an ellipse - seems to work OK if the path is a circle or spline.
I use all my knowledge of technical drawing from school many years ago to produce drawings in AutoCAD 2002, but I can't remember how you would define the dimensions of an ellipse in a drawing so that someone could produce it from the plotted output.
View 9 Replies View RelatedI have the following shape:
Which is an ellipse which I happened to draw a line inside of. My goal is to be able to join the line with the ellipse so I can make it part of the shape, then I'd like to chop off the top of the ellipse (the part on top of the line).
