If I left click the tag one of the options is to convert it to a category but nothing happens, I used to have a category called other, some how it is now under events. I want it back as a main category.
View 1 RepliesCan I have a category album, then an album, then a third step down of sub-albums within the album for, say, grouping separately different ports of call when cruising? My (very old) PhotoshopElements could do this but unfortunately was not compatible with my new Windows 8 pc so I had to get Elements 12.
View 2 Replies View RelatedI have album category B inside album category A. I want to move B to the top level. How do I do that? I can easily drag B and drop it on another category but I cannot find where to drop it to make it a top level category.
View 2 Replies View RelatedIn PSE 11 the "People" keytag category has disappeared from the right keytag panel. How do I restore it?
View 2 Replies View RelatedI recently upgraded from PSE 11 to PSE 12. In PSE 11, all of my tags were in its Keyword category. However, the upgrade has placed my (hundreds of) tags relating to places and events into the new Places and new Events categories, where I can't find a way to edit them, to move them or to add new tags. (My people tags ended up in Keywords and are thus ok). How can I move all of my sub-categories and keywords in PSE 12 into the Keyword category?
View 11 Replies View RelatedI need to delete an albom category but save the albums in the category. As of now, when trying to delete an albom category it says the albums will be deleted also. Is there any way to move the albums before deleteing the album category.
View 2 Replies View RelatedI am trying to create a new coordinate category using the "Coordinate System Category Manager". However, I get this message "Cannot add category to dictionary". I just want to put a couple of defined coordinate systems in a category so they'll be much easier to find.
I am logged in as SuperUser.
Autodesk AutoCAD Map 3D 2014
Windows 7 Professional
Service Pack 1
Intel(R) Core(TM) i5-4430 CPU @ 3.00 GHz
8.00 GB RAM
Is there a Family Category that allows me to create an Extrusion that will then work with the “Attach Top/Base” tool?
For example, instead of using a structural column, I would instead like to use a Model In-Place Extrusion, then be able to attach these columns to my roof.
I’m noticing you don’t get the option to “Attach Top/Base” when you use a Model In-Place Extrusion.
When I try to create new baluster in the family but it belongs to air terminal category. Is there any clashes? Any family category description. Such as what is the difference between Lighting fixture and Lighting device. In Autodesk library has few families which has same things with different category.
View 2 Replies View RelatedI have a Multi-Category Schedule and using certain fields it shows me Furniture, Toilet Assoc., Plumbing Fixturers, etc. All I want the Schedule to show is Furniture and Furniture Systems together in one schedule. When going to the Filter I choose Category>Equals>Furniture Systems and Category>Equals>Furniture. Assuming that the schdule would filter out everything else and only show items from the Furniture Systems Category and the Furniture Category. Instead it shows me nothing, eveything disappears. Its as if it is looking for a Catgory that is botn Furnitue Sysems and Furiture as one. I can do each Category individualy and its fine but I can't Filter by both? How can I get this scheudle to just show me Furniture and Funiture Systems? is their an update to correct a bug in the software that will fix this?
View 2 Replies View RelatedI am trying to find a way to control the leader line of a multi-category tag such that the second line of the leader is horizontal - my users are spending too much time to make our leaders look better than "sloppy".
I do have a Keynote family that can accomplish this but I cannot find the same for the multi-category tag. And I cannot find a way to make my Keynote tag a multi-category tag.
Is there a way to combine several multi-category schedules, so that the calulation of the total cost can be displayed in one final schedule?
View 1 Replies View RelatedProblem: in order to get Revit Mep to calculate roofs in the heatload calculation I the floor I used need to be a roof.
Revit MEP does not calculate any roof area since in my model I used floors to finish a level. Which i architurally correct. But partially it's also a roof. Revit Mep does not use the floor as a roof. So what i want to do is to redefine a complex floor with lots of curved sides etc. into a roof.
The question is: is it possible to just tell revit somehow to change the categorie of the element to roof? or do I have to redraw the whole floor as a flat roof?
I am a new user of civil 3D 2012. How to write a new coordinate category in my computer.
I am using a 64 bit windows 7 and everytime I attempt to write a new coordinate system category it always display the words " no access to write to the dictionary".
When creating new category, there's Parameter tab for creating new parameters. Now when publishing iPart, created category parameters must be mapped to family table columns. But why? What are they used for?
View 1 Replies View RelatedWe have copied a content centre family, for example
Fasteners->Pins->Clevis Pins->Clevis Pins With Head
Is it possible to change the copied families location, for example.
Fasteners->standard parts
Is it possible or can I only move it if I republish it, but I can't do that because I don't have the part.
I would like to create a new category in content center. I couldn't find any support. How to create it?
View 2 Replies View RelatedI have a question regarding to modify category in a user library. I have to publish a part into a special category in Inventor 2012. These category asks for an Parameter which doesn't exist in my part. Actually is an absolutely useless Parameter so i want to delete it from category. The category was created by an user but i don't know how to delete the parameter. Only if i create a new Category i can change the category-properties just till its created.
View 6 Replies View RelatedI have created a schedule based off some OFCI ( Owner Furnished Contractor Installed) Items. Some of these items cannot be found online or in the revit library (such as a spectrophotometer). So I created a mass and identified type marks for these items. However, I cannot seem to get the mass items to show on the multi-category schedule. Is there a way to do this or another way to create a schedule that includes mass and equipment?
View 1 Replies View RelatedI'm trying to create a custom view title family for the office (see attached). We'd like to have a label for Drawing Type (ie. "Building Plan" in the attached image) in the view title which would appear in the properties tab under identity data, next to the standard Title on Sheet, View Name, etc.
In the project, I am able to create a project parameter which appears as desired in the properties tab, but am unable to add the parameter inside the family when creating it. It seems impossible to add this parameter to the standard view title family template (alongside Detail Number, Sheet Number, etc.).
I tried it using a Generic Annotation family, but in the project, Revit does not recognize that family as a view category family and therefore you cannot choose this family when setting your view type.
How can I make exceptions in the Grand Sum of the Multi-Category Schedule?
I've set up a Multi-Category Schedule to calculate area, volume and length of materials, but I would like the Grand Sum to not acount for every material in the list (as some materials should only be calculated in volume, some in area etc.)
Since i get around with the content center i am making our own custom frames and parts.
Now i have made a new category in the structural shapes category with all our own standards. Because we're using some of the standard DIN EN 10210-2 pipes i want to copy this library to our own category and remove some of the pipes we never use.
What i did is:
-save copy as the family.
-move to my own library view
- tried to drag and drop the copied part to our own library (not possible)
- tried to change the family properties (parameter mapping) "Structural Shapes->Round Tubes" (not possible)
Is there any way to change the category, move/copy it to the our own category and delete the old one, of this copied library part , so it is easy reachable in the frame generator or "place from content center"?
Using PSE9, I put a .jpg photo into the camera raw editing window. After editing it, I clicked on Open Image and finished the tweaks there. When I tried to save it, it didn't allow me to save it as a .jpg, only .psd, .png, tiff, etc. I've tried to Save As but the .jpg option doesn't come up. how to get a .psd file to be saved as a .jpg.
View 2 Replies View RelatedI am using elements 11.
Will not change to another area, such as from effects to graphics.
I am Trying to add the category Field to the parts list, if a sting exists in the field. I want to run this as a rule at the Drawing Level. I can check if there is a sting in the Category Field But not sure how to add this in the Parts List.
View 4 Replies View RelatedI would like to dedact some parts of the Multi-Category Schedule (to only show the measurements of units of quantities valid for the given materials)
This seems achievable in the working view mode, but when I place the schedule in a layout, the dedaction is no longer visible.
If this setting cannot be transfered to the Layout view, is there a similar method that can be used to dedact some parts of the schedule?
I would like to dedact some parts of the Multi-Category Schedule (to only show the measurements of units of quantities valid for the given materials)
This seems achievable in the working view mode, but when I place the schedule in a layout, the dedaction is no longer visible.
If this setting cannot be transfered to the Layout view, is there a similar method that can be used to dedact some parts of the schedule?
I've created a new library, in the appearance browser and then a category inside called mesh. Somehow I cannot edit the appearance of what I've called Flatex338... I can add it to the current document and then edit it, but cannot edit the original or 'master' appearance.
I'm struggling with the changeover to 2013 with this appearance and materials. Downloaded a document on it from Autodesk but it's only about 30% useful.
What is the best way to change the background completely? The people in the foreground are OK but there is quite a flash glare on the wall directly behind the subjects.
View 4 Replies View RelatedI have all of my photos on an external hard drive that I am currently accessing through a router. I would now like to access the external hard drive directly from my laptop (thereby changing the path). How do I do this while still retaining all of the tags and places I have stored?
View 1 Replies View RelatedTheres a screen in Photoshop where you can change size of a picture from large to medium to small by sliding a scale. I found it once but now cant find it.
View 2 Replies View Related