Crop and straighten tool no longer work correctly in PSE 11, windows 7. Problem surfaced in the last week. Have done a complete reinstall and problem still exists. Appers to be an instability error.
View 1 Repliesif I use the Straighten tool (first the ruler to mark out a horizon line, then click the Straighten Layer button), Photoshop used to straighten the picture, and then automatically crop it so that none of the extra canvas shows.
When I do that now, it just straightens it, and leaves me to manually crop the picture.
on my laptop i run xp adn photoshop cs3 normal (not extended)what i miss is a good straighten and crop like cs5in cs3 i use the ruler tool ->rotate canvas -> arbitrary and i my photo is straight but with big borders around the photo now cs5 does a great job but photoshop cs3 no there is the scipt straighten and crop photos but in this case doesn't do a great job
because delete the borders and my photo returns to be awryok i can crop manually , but it's exhausting if i have to work on some photos , one by oneis there a script/action/tips or plugin that can do the same great cs5 job?
I am running Photoshop CS. I have many hundred documents to scan and was going to use the pre loaded "Crop and Straighten" tool under file/automate. My problem is I want to run this over a folder that will save and close, not just one image at a time.
I also want it to do an automatic save using the current file name without adding the word "copy" to it, and not have to type over the file name each time when the save option comes up with "Filename copy.tiff".
I know the Crop and straighten tool is great for putting several images on a scanner and it separating them into individual images, but this is not what I am doing, I have one scan, one document.
So is it possible to run this over a folder of 500+ documents and walk away from it, have all images save and close using the current name, and not fill the desktop up with many opened images that need to be manually closed?
I keep getting Instability of node errors in my Frame Generator. Specifically type 3 at node 62 in direction RY. I am new to FG results seem reasonable just can't get past this error. I tried deleting the member and inserting a new one in its place. The error then goes to another node?
The application is a steel box frame being lifted by a crane, FWIW. when you create special parts for FG and post them from Iparts, where do they go? I need to go back in and alter some properties.
Inventor 2011 Pro 64 bit
Windows XP Pro 64 bit
Dell Precision PWS390
Intel Core 2 CPU 6700 @2.66GHz
7.93 GHz Ram
ATI FireGL V7200
I have a couple of photos of the sun (700 to be exact) that I'm trying to crop. Doing it manually on each one would be very tedious and so I found the automatic script of Crop & Straighten.
However, even though it does a good crop when I batch process all my snaps using an action with the crop & straighten within it, the photos are also straightened or rotated in this case. Is there any way to avoid the straightening part to work on the images and just use the tool to crop the images automatically ?
In CS6 I have an image that was scanned in and is crooked. I use the Crop tool to drag the crop marks around the portion of the image I want to keep and I press the Check mark to do the crop.
It crops the image though it does not straighten it out. In previous versions of Photoshop it use to crop and straighten the image by cropping it. How do you now use the Crop tool to straighten an image?
AFAICT there is no option to make the Straighten function in CS6 automatically crop out the transparent pixels as happens with CS5.
View 5 Replies View RelatedYou can easily fix crooked photos, zoom and crop with the fill tool.
The first step is to make sure you have the rulers enabled (window>bars>rulers) then click and drag a horizontal guideline from the ruler.
Select your photo and select the fill tool, you will see that your photo is actually a vector shape with a bitmap fill. Click and drag the outer fill handles to enlarge (zoom) the bitmap within the shape and rotate as needed to straighten the image. Move the cursor over the line of the fil handles until it changes to a hand then click and drag the photo around to adjust it's position within the shape.
I have a large number of RAW photos from a Canon 7D which are destined for use in a Premiere Pro CS6 project.
I want to crop each of them to the preset 16x9 1920 x 1080.
What I would like to happen is that when I open the photo in the develop module and press the R button to open the Crop and Straighten tool, that the Aspect 16X9 crop overlay is selected be default, rather then the "original".
This would save me a lot of mouse clicks...
Or perhaps it's possible to assign a keyboard shortcut to that particular aspect so I can press R and then something else?
I'm new to Lightoom but learning quickly. One thing that has given me a problem is in develop module when I wish to straighten and crop, but need to do this zoomed in on the image. Can't judge the straightening otherwise. When I try this as soon as hit the straighten tool the image goes to fit to screen and I can no longer judge my straightening.
View 7 Replies View RelatedHow do you crop extraneous elements from your work with Xara? I've tried the advanced clip tool, but it doesn't do anything. Well, that I can see.
View 7 Replies View RelatedWhen I am trying to straighten an image with the ruler tool, I keep receiving the following error:
Error 8800: General Photoshop error occurred. This functionality may not be available in this version of Photoshop.
- The command "Set" is not currently available.Line: 254-> app.activeDocument.activeLayer.isBackgroundLayer = false;
I don't understand why this isn't working because I have used this feature before.
I have followed the instructions provided but when I click on Stragten Photo, it turns the photo almost diagonally. I never get the line that appears in the How To blurb. I find that i go back to my old software to do this task as it is much easier.
View 1 Replies View RelatedMy boyfriend purchased Photoshop Elements 11 for me recently and I am just now learning how to use it. I did some Wedding photos for a friend yesterday and I've edited them but some of them are slightly crooked. I went looking for a straightening tool but was unable to find it. I finally found in the menu where it says 'Rotate' and looked in that selection and at the bottom it says Straighten and Crop and underneath that is another that says "Straighten".
I went on Youtube and whatever I find there is so majorly different from my program that I cannot even use their tutorials. How to use Photoshop elements 11 to straighten my photos? I need to do this right away so the couple can have their photos.
When I click on the straighten tool and then click on a horizontal line on my photo, as I attempt to draw the line across the photo it freezes after a fraction of an inch and rotates the photo before I've drawn the line along the horizontal feature I'm using and it's always wrong. I had this problem with my downloaded trial version of Elements 11 and it appears on the version I purchased in the store today.
View 10 Replies View RelatedLevels don't work in my installation of CS 5.1. The dialog comes up but adjustment don't change the image. I reinstalled CS 5.1 but that didn't fix things.
View 3 Replies View RelatedThere used to be a circle onscreen that you could turn to change the amount of blur. And there were lines and or oval areas that could be made bigger or smaller to influence the area of blur. And while there are still pins that can still be placed to further control the blur, they don't really work. I also have the same problem with the new lighting effects as well.
View 9 Replies View Relateddownloaded upgrade versions CS3 on septate computers. She is taking a class in Photoshop using the Adobe Classroom in a Book as a text. About a month ago she started to have problems getting selection tools and brushes etc. to work. None of those types of tools work at all now.
She has downloaded the latest upgrades. We have completely removed Photoshop from the computer, and reinstalled it twice. The computer is scanned for viruses and bots. All other applications work fine. She is now having to use my computer to complete her class work.
When I have a large image and I try to crop it I cannot control where the crop is to take place. Sometimes I cannot make the selection as large as I want.
I am using CS
it seems to only be doing this on 50 x 0 in 72dpi unnamed (not given an extension yet) pictures!!! every time I have a picture of that size and I bring down ANY menu (such as 'edit') it causes Gimp to be unstable and freeze and I lose EVERYTHING in ALL pictures I have up after closing the nonresponsive process!
View 1 Replies View RelatedI have been using coreldraw 12 for some time and all of a sudden the transformation docker, I usually get it to pop up with the alt F7 shortcut, does not come up. None of the ones listed under arrange, transformations will work. Have I accidently turned something off or what. I have uninstalled and reinstalled and it is the same. I am running windows 7
View 8 Replies View RelatedAll of a sudden, though I've change nothing, my line properties are messed up, here are some of the issues
1) My line type no longer works (via layers or directly)
2) My text section within line properties no longer shows up in order to access 'text overide'
3) I can no longer change the line color.
I gues this is another bug by Autodesk that is comming up in my stress analysis. Basically all work I have done is gone. The frame won't appear and get big "NOT AVAILIBLE" on my screen. There is no way to fix it because there is no red cross highlighted
View 1 Replies View RelatedThis is the error message I get on my mac book air. It previously worked and now all of a sudden it does not. I have creative cloud and running latest mountain lion.
I have uninstalled and reinstalled. I have 58.86GB of storage space.
Message:
Could not build the Crop preview because of a program error.
make manual lens adjustment and hit the constrain crop checkbox sometimes nothing happens (not tick appears, grey borders remain) Somtimes you can tick it and nothing happens. Sometimes you can tick it nothing happens but then click off the photo and back on, and the box is unticked but the crop has been applied!
View 7 Replies View RelatedI'm cropping a few thousand pictures, and the crop tool is just sluggish.
Changing the crop or moving the picture behind the crop is jumpy, sometimes it needs seconds to change the display, which makes cropping pain to work.
Even after the picture is loaded and the lightroom rested some time, cropping is sluggish, which should not be, since the picture is fully in the memory and moving it around should be easy for the computer.
So how can I get the crop tool to move faster?
I'm using a Win7 Core i7-2600 with 16GB Ram, LR catalogue on Intel SSD, images on a fast SeaGate HDD, AMD Radeon HD 6800 grafics adapter, 30" (2560x1600) display. The files are NEF from a Nikon D800E, but the files from my D700 are slow, too.
Somehow I have dragged the basic screen of Editor outside the perimeter of my MacBook Pro Screen. The tool bar is no longer visible. I cannot get to any edges to resize the workspace.
View 2 Replies View RelatedAfter a computer crash, all my files and programs were restored, and most everything is working normally again. However when I open Photoshop Elements it no longer opens my catalog. How do I locate my catalog?
View 2 Replies View RelatedAfter backing up my Photoshop Elements 8 catalog, my folders no longer display. How can I re-display them?
View 1 Replies View RelatedThe editor module no longer opens either from Organiser or Welcome screen. What do I need to do?
View 1 Replies View Related