I gues this is another bug by Autodesk that is comming up in my stress analysis. Basically all work I have done is gone. The frame won't appear and get big "NOT AVAILIBLE" on my screen. There is no way to fix it because there is no red cross highlighted
View 1 RepliesAs you can see from the image below, the preview shows the weld I want and need, but as per the error message it is saying the geometry is no longer available. What does that mean? Anything to do with the fact that the pieces being welded together are custom CC parts? If that is the issue is there a remedy for it?
Inventor Suite 2012
Windows 7 Professional
Intel (R) Xeon (R) CPU 3.47 GHz
12.0 GB Memory, 64 bit OS
On AssemblyConstraints what is the difference between EntityOne(Two) and GeometryOne(Two). When should one be used over the other?
Likewise with AffectedOccurrenceOne(Two) and OccurrenceOne(Two).
In Inventor 2011 and previous, one could detect assembly constraint errors by taking a component that was not fully constrained and manipulating it via a mouse click and drag. This would launch a dialogue box listing all the constraints that are having problems and still allow you to accept the manual part manipulation.
However, I am now using Inventor 2013 and when I have constraint errors, I cannot manually manipulate non-fully constrained objects and do not get that overall constraint error dialogue box. Is there a setting to turn this back on?
I am having performance problems with constraining a FG assembly. I have a simple frame, (cube form). When I am trying to constrain some brakets to the frame (or anything else) and click apply, Inventor freezes and I have to wait about 2 mins.
The same when I try to insert new frame members
Inventor 2012
Win 7 64-bit
Dell Precision T5400
Intel Xeon 2,5 GHz
8 Gb RAM
NVIDIA Quadro Fx 3700
I am designing a vertical axis wind turbine just for some practice (just started using Inventor) and everything was going smoothly until I tried to "animate" it spinning. First, I set up a work plane that goes through the center of the structure, and then I clicked angle constraint "explicit reference vector." After watching several youtube videos, I figured that I should click on the work plane, click on another reference point, and then click another point that would be orthogonal to those two (right?). Well after I choose the first point, Inventor will only allow me to choose the center axis as the second option (which I think should be the third option).
View 6 Replies View RelatedI've never seen this one before, I'm drawing a circle around each block reference insert choosen with a selection set to highlight it. On any block references that is mirrored, I get an error "degenerate geometry"
View 1 Replies View RelatedOut side door pull will not stay in place in project view when family is loaded into wall thickness narrower than that used in family detail.
In family editor have tried pinning the pull and pinning its dimension. Cannot lock the dimension due to constraint error. Pull is dimensioned to ref plane at center of glass door. (Door is sliding glass adjacent to stationary glass panels.)
I have an assembly which has components mated to a radial surface, I need to locate the center of a round slot against an axis, I have X Y coordinates, how can I constrain that part to those X Y coordinates?
Attached is a picture of the assembly.
I am currently creating a chain block to be animated later on. But, I do not know how to constraint it.
I have attached a zip file of the .ipt and .iam
Maybe I've just been doing it wrong for the last 5 years, but the Angle constraint is obnoxiously unpredictable. When I constrain a part in an assembly with an angle constraint from the assembly origin plane (or anything else), Inventor always has two solutions; a positive and negative.
Is there something I'm missing here, or is just a design flaw we have to live with?
I am trying to place a tubes cylindrical surface to another tubes cylindrical surface using add constraint. How do I specify which side of the target surface to apply the constraint ?
View 4 Replies View RelatedI have a question regarding a transitional constraint between a pin and a surface within an adaptive assembly.
I would like the pin and the surface to be transitional only when the two parts "interfere" with each other.
At the moment with the example attached part A is remaining tangent to part B, restricting the necessary movement of part B to function properly in the mechanism.
In simplified terms I need part B to be able to break free of the "transitional constraint" of part A under certain movement conditions within the mechanism.
This is probably a simple one that I am missing, but how do I get a parallel constraint applied to these two edges.
View 4 Replies View RelatedI have noticed what I consider a bug in AI2009. When trying to delete a coincident constraint using the show constraint command, it is impossible to do so. All other constraints I can delete while I am in the "show constraints" dialog box, but not coincident constraints. As soon as I get out of the "Show constraints" command, the yellow dots are still showing and I can then hover over them and they highlight so I can delete them. Is this how it was intended or should I be able to delete them like the others while still in the "show constraints" command?
View 9 Replies View RelatedI'm running 2014. Somehow, in my ignorance, I have managed to turn off the constraint symbols that show up beside the cursor as I'm sketching.
View 1 Replies View RelatedIs there a way to expand the constraint window so that I can see my entire parameter formula? In the image below, my equation is cut off in the "offset" window. Or am I supposed to be inputting the parameters in some other manner?
View 9 Replies View RelatedI'm having a really difficult time maintaining my parameters when making changes to the part I've made in the attachment. The control parameters for this part are:
-100 mm distance between 15mm circles
-1 of the 15 mm holes
-30 mm hole
I am new to inventor but I would also like to be able to set up my constraints correctly. I'm also not sure if my sketches are ideal for this part either. I usually get an error concerning my fillets from the base to the center support beam when I try to change the 100 to 75.
How do you delete a constraint between a point and the center point of a line? (in the sketch environment)
View 2 Replies View RelatedI've assembled a bolt and a slide block that is constrained to a base plate and am able to put everything in motion. I have the slide block constrained to slide the distance of the base plate and when I reach the end the bolt continues to rotate when, if this was a real part, should stop. How can I get this bolt to stop once the slide block reaches its ending constraint?
View 2 Replies View RelatedHow do you constrain an object to the origin once the origin constraint has been deleted. I'm not really sure how it became unconstrained in the first place. When I try to constrain the drawing using the coincident constraint it won't allow me to select the origin.
View 1 Replies View RelatedWhy can I not constrain placed objects with three constraints? Anything I place constrains with one constraint then is virtually fixed (without being) and cannot even be moved to allow for further constraining.
View 9 Replies View RelatedMy need is to assembly parts into an assembly by a known position in the assembly. The part has a UCS and I create UCS on the assembly programatically. What I cannot do is to constrain the two UCS. I tried this (Inventor 2013 x64 on W7/W8 64, c++ 2010 by the way DEBUG mode is not working from the IDE):
CAssemblyComponentDefinition compDef = doc.get_ComponentDefinition();
// MOdules UCS
CUserCoordinateSystems coords = compDef.get_UserCoordinateSystems();
CTransientGeometry geom = m_InventorApp.get_TransientGeometry();
CMatrix matrix = geom.CreateMatrix();
[code]...
Basically, I would like to do this:
[URL]..........
(i.e., take two object Z axes and constraint them to be the same), but in C#. In particular, what puzzles me is that I cannot make
'Get the Z-axis work axis from the occurrent.
Dim oPartAxis As WorkAxis
Set oPartAxis = oPartOcc.Definition.WorkAxes.Item(3)
in C# because the Definition object has not a WorkAxis instance.
See attached screen shot.
To activate the new position of the assembly of approx 5k instances takes about 5 minutes in IV 2013 when using Drive constraint. The larger the assembly the longer it takes
In IV2011 takes about 10 seconds. I've never seen the "Not responding" sign in Drive constraint window in previous versions. I'm just wondering how can avoid this "New feature" of 2013.
We have an interesting problem after reinstalling the software. We found that there is a time lag between the mouse pointer and the line highlight to indicate we have click the correct entity. The video attached in the link below may be able to explain our problem better. In the video, we move the mouse to where we want it and it shows a time lag.
[URL].......
I can't seem to get inventor to select a given parameter inside a sketch. It keeps giving me an error.
All I want to do is to have inventor Select / Highlight a parameter inside of a sketch so the user can clearly see it in the window. Ive tried heaps of different selection options, I just can't work out what ive done wrong.
Sub GetParameter()Dim TargetName As StringDim oCompDef As PartComponentDefinitionDim oSketch As PlanarSketchDim oConstr As DimensionConstraintDim oParam As ParameterDim oCmdMgr As CommandManagerTargetName = d0 ' parameter nameSet oCmdMgr = ThisApplication.CommandManagerSet oCompDef = ThisApplication.ActiveDocument.ComponentDefinitionFor Each oSketch In oCompDef.Sketches For Each oConstr In oSketch.DimensionConstraints If oConstr.Parameter.Name = TargetName Then Set oParam = oConstr.Parameter oSketch.Edit Call oCmdMgr.DoSelect(oParam) Exit Sub End If NextNextEnd Sub
I have an assembly wherein one part is mated to another grounded part, with a face-to-face coincident mate. The click + drag type of movement appears to move the part, while continually solving this constraint.
However, it seems like there is no way to do a rotation in the same manner, where the constraint is continually updated. There appears to only be the "Free Rotate" command, which ignores the constraints.
Is there really no way to do this in Inventor? The application is that I am laying out a mold for many, many small parts, and I am trying to move and rotate them into position to get good packing efficiency and density. Each part will be attached to a mold base with one of the aforementioned face-to-face constraints, then slid & rotated around manually.
This seems like a really important piece of functionality. Solidworks can certainly do this, do a part rotation in an assembly, while solving for existing constraints.
I am using Autodesk Inventor Professional 2013.
Motor Model 1:1 is used to turn the wheel holders at various angles. The part named "front gear spring holder" is supposed to revolve and turn the inner part of the "front wheel holder" My problem is that I want to simulate the turning of the front wheel's using contact sets or 3d/2d contact sets in the dynamic simulation environment. I do not know how to do this, but I'm almost certain the program is capable of doing so. Also the spinning of the front wheels must be able to be done along with various angles of the front wheels(while turning, the front wheels must be able to still spin with the front gear spring holder".
I have seen threads and articles that say that making gears with contact sets is not recommended or possible but i have two instances here where they work perfectly fine using the dynamic simulation with 3d /contact sets. Take a look at the simulation I have saved as well.
I will need more on this assembly in the future, including how to create bevel gears that work at 90 degree angles or spur gears with contact sets instead of just simulating their movements .
Attached is an assembly that I created. It includes a timing belt, 2 pulleys, 2 shafts, and some profile lugs that are attached to the belt with a false tooth.
1. why can't I constrain the profile lugs around the radius of the belt? Also, when I created the belt and put the holes in it, they disappeared because they ended up in the radius of the belt.
2. Is it possible to create a motion constraint to this model, so that it moves like a real belt?
I want to create some universal bricks creations. These bricks have studs which fit into another brick. To constraint them I need to do following actions:
- click place constraint
- Assembly >> Insert >> opposed
- Offset 0,35mm.
I would like to make above into 1 action, so just click to add this action, then select the 2 faces to constrain.