Is it possible to disable propogate frame 1 permanently in cs6. Everytime I uncheck it, if I undo my edits or erase my frames it copies the first frame elements onto the entire animation causing for me to go through and fix this eachtime.
I'm aware there was a way to diable it in Cs3 but I don't see a way to so it in cs6.
I have my grids assigned to a scope box and have modified the extents of many of them. How can I apply that to the remaining floors? I think you are able to do this with dependent views. How about with adjacent views on the rest of the floors?
View 1 Replies View RelatedI'm trying to import a a custom titleblock into each existing layout from a dwg. So far, i've been successful in importing this block into the first layout but can't seem to figure how to bring it into the remaining. I have a command that runs before this one that allows the user to define how many layouts should exist, so for instance, if a user opts to create 7 layouts, once they import this titleblock, i'd like it to appear in all 7 layouts. So far this is what i've got.
namespace CHTitleBlockImportMetricH
{
public class CHTBMETRICH
[Code]....
How do you turn off the default check for "Propigate to parent view" when creating a breal in a drawing view. I have never had the need to use this option yet it is checked by defalt.
View 8 Replies View RelatedI have two simple parts: an (almost) rectangular prism and a simple polygonal extrusion. The polygonal extrusion needs to be situated inside the prism, so I placed them in an assembly constrained the polygonal extrusion made a sketch on the extrusion with a simple 1/8 outward Offset of the profiledid a Model > Modify Assembly > Extrude using the profile and Through All selected removed the polygonal extrusion as a participant to get the desired effect (in the photo, the offset is enlarged for clarity):
This works perfectly at the assembly level. However, I would also like this cut to be propagated to the rectangular part itself (the part through which the cut passes). When I open the part file, I still see the original part without the cut. Is there a way I can cut the part itself without recreating the shape in the part to be cut?
I've tried using Model > Create > Derive with the intention of using Model > Modify > Combine with an operation mode of Cut, but when I Derive the part, it is placed in the wrong location:
when i use the alt zoom function both with my keyboard and with my tablet the eyedropper tool shows up.
I understand that when you hold down the alt button the eyedropper tool shows up when using the brush tool but i was wondering if there was a way to disable this feature or modify it in some way because this is seriously affecting my ability to use my tablet as it changes the color of my brush when I use the zoom function.
Using a Macbook Pro Mountain Lion OS
Wacom Intuos 4
Updated Drivers in everything as of October 8th 2012
Each time I open CS4 and the initial image I get this message, "Photoshop has encountered a problem with the display driver, and has temporarily disabled GPU enhancements. Check the video card manufacturer's website for the latest software."
I'm writing to the Adobe Forum because GeForce feels they are not the cause of the problem. Here is what I've done toward resolving this problem: As a side note let me add here that after upgrading CS2 to CS4 this error message appeared religiously. That caused me to purchased an Nvidia GeForce 9600 GT display adapter w/ 512mb memory.
Prior to installing the new card I downloaded their newest drivers for this card after removing the old drivers. Originally I had a GeForce 7600 card. The error message continued with the new card. I've searched the settings within CS4 trying to find an option that would resolve the problem. This machine has a new motherboard, a D945GNT Intel board. It will support 64-bit however I'm currently running XP Pro 32-bit, SP3.
when i change the blending modes, to not store in history, because i find it useless and it takes a lot of history states untill i dont have mutch undos to go further back.
View 4 Replies View Relatedanyway to tell photoshop CS to quit showing me all of the hidden tools every time I choose a tool. I'm not an idiot, Photoshop...when I want the paint brush, I don't want to choose between the paint brush and the pencil! What kind of a 'feature' is that?
View 2 Replies View RelatedHow do I disable replacing option while using Actions on bing.jpg file?
View 15 Replies View Relatedif there was a way to disable the hotkeys that PSP7 provides. Occasionally when I'm using PSP, I dont know what I click, but the hotkeys are activated. Its a hassle trying to use the text feature and trying to save the file: windows are popping up and toolbars disappear off the screen. The only solution that I've found was to close the program and open it again. I'd rather avoid the hassle of closing all of my files and opening them again.
View 1 Replies View RelatedThe requirement that Place Tags have a GPS coordinate makes them unusable for me. My places are areas, not places. How do I disable this function?
View 1 Replies View RelatedPhotoshop has started acting very strange. It's incorrectly detecting less than 512MB VRAM (AMD 5770HD, 1024MB VRAM). I thought it may be a graphics driver issue but neither the latest stable nor beta seem to effect this.
Since 3D features have been disabled, the application is unstable. Changing tools a few times will always result in an appcrash exception.
System specs:
Windows 7 x64 ultimate
Core i5-3470
16GB RAM
AMD HD5770
I have a feeling I know what's causing 3D mode to disable and that's the integrated card on this motherboard. This currently acts as an additional monitor output and is set as the primary device in the bios (and I can't change this) but shares some state via some LucidLogix thing on the motherboard. Is there any way to disable this VRAM check?
does anyone know a way to prevent default masks on Smart Filters from showing up?
View 2 Replies View RelatedI create animated gifs frequently using the Frame Animation pallet. The default frame rate starts out as 10 seconds, so I always have to change it to 4 seconds. Is there anyway to reset the default frame rate that I start out with to 4 seconds, so that I don't have to change it every time?
Preferences did not yield any promising menus
I know the standard default reset with many Adobe products is to change it without a document open, but in PS CS5.5 if you do not have a document open the frame rate option is greyed out
______________
CS5.5
MacPro Tower
Mac OS 10.8.2
I am trying to add a frame to some pictures, but when trying to apply a frame from the content section, the frame goes on top of any picture...and not directly on to the picture.
View 2 Replies View RelatedI am using Photoshop CS6 and if I have nested layer groups whose depth is greater than 5 I get the following error message. "This document contains nested layer groups that may change in appearance if opened in applications older than Photoshop CS6".
I can click on "don't show this message again" before pressing ok, but can i disable it from showing somewhere in the application settings? I want to enable it sometimes and sometimes not.
- The "Reset All Warning Dialogs" button from Edit - Preferences - General is not very usefull because I want to keep other messages' settings, only this one should be affected.
How do I creat a frame inside a frame? Elements 4.0
View 2 Replies View RelatedI was messing around with my 3ds Max UI today, trying to freshen things up a bit, when I noticed the "Minimize" option for the Command panel window. I quite like the way this works, although one thing is bugging me about it.
When you enter or exit the Command Panel it "slides" in & out of view. Is there any way to disable this animation? Otherwise this is a pretty cool feature which I can't believe I didn't see before.
I forgot what the command for this very basic function was. All it does is make it so that you see a new AutoCAD 2010 tab down on the windows task bar for every different file you have opened. I thought it was just "tab", but apparently not.
View 3 Replies View Relatedoften the hatches in the drawing is so dense i cant navigate. is there a way the disable hatches display?
View 5 Replies View RelatedI am using autocad lt 2000i in windows 7. The drawing properties command causes autocad to abort. I would like to remove this command from the drop down box.
View 6 Replies View RelatedI am editing a short avi clip converted from a 1959 8mm film in the timeline. The telecine conversion results in as sharp an image as I have manged to get using PPro 5.5 unsharp mask. I tried mocha planar tracking to automatically remove a fixed spider web on the top edge of each frame in the clip.
Because the web is not distinct and the background does not progress at a steady fixed pace, the mocha procedure was not successful. Previous feedback recommended methods to mask the edge. Using various masking attempts to automate the procedure was also unsuccessful for the same reasons as mocha.
I have the time and decided to replace the spider web on each frame edge using photoshop tools e.g. clone stamp etc. - although other tools such as healing brush do not appear to work in the timeline as I expect.
My saves so far have resulted in a whole clip being saved with all following frames being modified similar to the first edited frame. Perhaps I am not using the editing procedures in photoshop from the timeline correctly.
How do I save frame by frame in the timeline?
My band has just recorded our first music video. We are very happy with the result except that the glasses on me (the lead singer) during the close-ups look very funny, they are very skew, and the "frame" does not go behind the ear.
What I would like to do is to import the video and edit these clips frame by frame, where this is showing. There is about 15 seconds totally of me in close-up - 15 x 24= 360 images. The clips are about 1-3 seconds long. And I want to edit all of these short clips of me and then make it a full-length video again.
I made a quick edit on one of the images from the video. The shades still look a little funny but it gets better when the frame goes behind the ear. If it's possible to correct the "glass" part of the shades as well.
I'm using Draw X6 64 bit. The program seems to get very unstable with large multipage files., especially just after saving. The save icon greys out suggesting a save is completed but it seems the save is still going on in the background. Is there anyway to get the old behaviour back so that the icon only greys out when the document is actually completely saved? It's safer to stop editing the file while it is saving rather than continue working on it, but the icon is giving me misleading feedback..
View 2 Replies View RelatedI just installed PSP X2 Ultimate and after first memory card use, I unchecked Photo Down loader so it won't run when I start the computer. Now when I "manually" move files from my memory card (SD) to my hard drive, I am Not able to delete those file on the memory card. Nor can I simply Move the files to my hard drive.
I had no problems before installing PSP. Now to remove the files I have to reformat the card(s) each time.
Seems like Photo Down loader put some hooks in the OS to operate and didn't remove them when I disabled it.
I have a sketch that has visibility on. In 2013 I can't find the turn visibility off.
View 3 Replies View RelatedWhen I installed AutoCAD 2011 for Mac the geometric constraints automatically to everything that I draw. There doesn't seem to be anything about turning this feature off all together in documentation. I can do it with a selection set, but when I would have to do it to every line that I draw, it seems pretty ridiculous.
View 7 Replies View RelatedA new feature in 2.8 appears to be keyboard accelerators (shortcuts) forthe pull-down menus. For example, Alt-S displays the Select menu, Alt-Wthe Windows menu, etc.
I have already assigned these key-combinations to other functions in thekeyboard shortcuts menu, but the default menubar assignments are takingprecedence.
How can I disable these menu accelerators so that I can regain the use ofthe Alt-[ESVILCTRWH] sequences?
Maybe there should be a toggle on the Configure Keyboard Shortcuts menu tohandle this. And certainly, if you reassign these keystrokes in the menu,their original function should be disabled.
I want to cut a gradient with hard edges. But gimp is anti aliasing and color blending the edges with every tools. Same happens on filling the selected area, or erasing, or deleting.
See here. The upper is the original before filling with white/deleting the selected are, the lower is the result. The edges are blended, but i don't want it to be blended!
How can i disable this behavior?
When I press the control, shift or alt key, a small tooltip pops up on screen to tell me which key I'm holding down. It disappears as soon as I release the key. How do I disable this behavior, so I'm no longer notified by such a small popup tooltip regarding the keys I'm holding down?
I've been looking in the preferences, but I couldn't find where I can toggle off this behavior.
[URL]
