Photoshop :: Deleting Old PS Files
Jul 21, 2009
All of my files were backed up and easily transfered to my new computer. Today I was doing some cleanup and wanted to move or delete some older psd files. These were created in CS2 (I have CS3 now) and haven't been opened since getting my new computer. Windows will not allow me to delete, move or rename several of these files. It tells me that they are "open in another application" even when photoshop isn't even open. I have tried opening a couple of them in CS3 and then closing them to see if this changes their status but the result is the same. How can I change their "open" status, delete, move or rename them at this point.
View 3 Replies
ADVERTISEMENT
Feb 25, 2013
Deleting files and saving files brings up an error message. Files can't be deleted from lightroom which makes editing a nightmare. Also Saving Files (raw of jpeg), brings up an error message everytime.
View 1 Replies
View Related
Oct 17, 2012
After this error when I click cancel to delete the files and start again shows the same error deleting the remaining files.
View 6 Replies
View Related
Jun 10, 2011
How do i delete old images in my gurus folder here, i have loads in there now and its taking ages to load before i can upload my next victim, i mean great member
View 2 Replies
View Related
Jul 8, 2007
I'm hitting delete key, one above the arrows, and sometimes the files go to trash, as did in CS2, and sometimes they become hidden files.
View 2 Replies
View Related
Sep 20, 2013
Photoshop/Bridge prevents deleting files. After I'm done with a job I store it on the server then try to delete the folder or files I've finished from my desktop. No can do.
Â
I found I have to shut down Photoshop and Bridge then I can move the stuff into trash.
View 1 Replies
View Related
Dec 29, 2012
Is there a setting where I can have this the default, instead of having to check the box each time? Running Elements 7 on my PC, Elements 10 on my laptop (which I haven't yet installed, trying to pare down my backup first).
View 1 Replies
View Related
Oct 9, 2012
How do I reconnect missing files without deleting them from catalog?
View 1 Replies
View Related
Aug 6, 2011
I have VideoStudio 11 running under an XP Virtual PC.
I'm sure that there is a command to delete temporary files but I can't for the life of me remember how to access it.
Alternatively, would it be easier to go straight to the VideoStudio working folder. I've just had a look there and was staggered to find no less than 24GB of various files in the CvtedTitle folder.
View 5 Replies
View Related
Dec 19, 2012
I have just moved my years worth of images off my laptop by exporting the catalogue throught Lightroom and everything that goes with it to a exteranl drive. Now I would like to delete the catalogue and all files associated with it. Do I need to do that through Lightroom or can I just delete the year 2012 in the pictures folder.
View 1 Replies
View Related
Mar 6, 2012
I use Aperture 3 and am thinking of switching to Lightroom 4. I do not store my photos in the Aperture 3 library. Instead I store my photos in my own folder system on an external hard drive and I reference the files in Aperture. This works well for most functions, but when I delete a photo from Aperture, it simply removes the thumbnail and all versions from Aperture, but does not delete the actual photo file on my hard drive. If I want to delete the actual photo file I must click "show file in finder" and manually delete it from the finder window.
Â
Is the process of organizing photos in your own folder system, and deleting unwanted photos, more seemlessly integrated in Lightroom 4?
View 1 Replies
View Related
Mar 11, 2013
At first I thought it was user error, but its happening while I'm editing the sheet set.
As I'm numbering the sheets, it gets stuck and won't allow me to advance to the next sheet. Next thing I know the sheet is greyed out and then the DWG file disappears from the foolder. Different sheet sets, different jobs, different drives on the network.
View 9 Replies
View Related
Aug 12, 2013
I am currently testing Lightroom on my computer and found a lot of useful features.
Â
1. Does Lightroom have a function against accidentally deleting of files or pictures?
Â
2. What about synchronisation? Can I use Lightroom on two computers, I mean when I work on the one computer, will all changes be available and visible on the other computer?
Â
3. Can I use one catalogue on two or more drives in my computer?
Â
4. Does Lightroom have a back-up function?
Â
5. Can Lightroom recognize faces of people so that the software finds all photos of the same person?
View 2 Replies
View Related
Mar 17, 2014
I have a problem moving files, importing files and deleting them from my disk.
Seems to be a problem between my Mac and Lightroom, but i'm not sure.
View 2 Replies
View Related
May 2, 2013
For some reason when i am editing clips (COD Clips) and other gameplays, files sometimes randomly delete on me. I go to the file and it's not there. Its basically like After Effects is deleting my files, i dont understand.
View 3 Replies
View Related
Mar 13, 2013
I was extracting a portion of a picture when I started getting the messages that my temp files may be full. Â I could not save, save as, or export what i had done. Â I am using Corel Draw Suite 12.
View 3 Replies
View Related
Aug 15, 2012
I've been having a problem with my AutoCAD LT 2010 completely deleting files after I have saved them and closed them. There is no file in the recovery manager, no back up file, nothing. It has happened three times without warning and it always happens to files I've been working on for awhile and have opened and closed multiple times. Is there any way to recover these files and how do I keep it from happening again?
View 1 Replies
View Related
Jun 12, 2013
I am getting "trash is not supported on this volume" errors when trying to delete rejected photos from two different firewire volumes on OS X 10.8.4.
Â
This is not an issue with internal hard drives and is not an issue in LR4.4 on the same external drives.
View 1 Replies
View Related
Apr 18, 2013
In an effort to free up space on our company server I have been tasked with archiving and/or deleting files, of which a large amount are cdr files. So my question...yesterday out of a design subfolder I deleted around 1700 backup files comprising 19GB of file space. It would be except for one thing, deleting 19GB out of that one folder cleared up 160GB of space on our server.I have double checked my file counts, sizes, folder counts, etc before and after I deleted the files and everything adds up except for the 19GB deleted cleared up 160GB of space. Â These files were mostly last saved with x6, though some of them were probably first created with x4.
View 9 Replies
View Related
Jun 28, 2012
Every-time I try either of these I get windows cannot locate Adobe_lightroom_x64.msi...I copied that file from the installation but lightroom refuses to use it!I tried deleting all the fold files for lightroom and still couldn't remove the program!!!
Â
I'm photographer and this problem is killing me! I really need this program working!I tried disabling my antivirus real time protection(avira) and tried some of the forum methods but nothing still works! I'm using administrator for installing and set permissions correctly nothing works!
Â
What's the best way to wipe a previous adobe installation?When I try to uninstall I get error 1714. Lightroom 3.6 installs fines. If I try to install regular lightroom 4, it only immediately converts to lightroom 4.1 installation?!??!?! I already converted my catalog folder to lightroom 4...
View 1 Replies
View Related
Nov 27, 2013
Is there a way to get rid of the unreferenced image files from a drawing from the command line. I have thousands of dwgs to batch edit using a script and Script Pro and need to automate the "right click and detach" on the command line.
View 3 Replies
View Related
Dec 30, 2013
I downloaded a Copy of AutoCAD Recent Documents Manager.exe from the autodesk website and it won't run on any of the computers in our system. I was thinking about writing a LISP routine to delete the filenames with a DST suffix by replacing them with the next filename in the list. My question is If I replace the file with the next one above and the filetime,filepinned and class respectively. When I reach the end of the list can I just use "" for the file,filetime and class and integer 0 for filepinned (it looks like it requires a double).
View 1 Replies
View Related
Apr 10, 2003
im trying to edit or delete the text on this image but i have no clue how. i want to put Hexy in instead of whats there, but i dont wanna mess the background up too bad. are there any shortcuts? or do i have to pain-stakingly edit it manually?
View 6 Replies
View Related
Jul 27, 2004
i made a logo for a website, and then knocked out the background.. but when it shows up on the website i designed it has a while outline on it.. how do i get rid of that? i saved it as a gif with layers.
View 9 Replies
View Related
Feb 17, 2006
When I try to create a mask in photoshop CS, for some reason my picture starts to get deleted. In the picture below, I copied the background layer, and then deleted the background layer leaving me with just the copied layer. I clicked Add Layer Mask, and then clicked the Layer Mask Thumbnail in the Layers tab and then I clicked the Brush icon to begin making my mask.
In the next picture below, I tried to make my mask, but instead of that red color I normally get that show's where i'm masking, the picture is just erased.
View 2 Replies
View Related
Dec 16, 2004
Is there an easy way to delete several of the History lines all at once without getting rid of all the History.
I've been dragging each line to the trash bin but it's slow going if you have a lot to get rid of.
View 9 Replies
View Related
Jun 6, 2008
I'll place a large image on a small canvas and start erasing the background, then if I move it, I see parts of the background outside of the canvas. Is there a quick and easy way to delete parts of the image that fall outside of the canvas?
View 3 Replies
View Related
Apr 23, 2004
how to get rid of an unwanted area I am trying to trace around a floor plan of a house and do not want anything else but the plan.
View 1 Replies
View Related
Aug 9, 2006
I have loaded some brushes I download but I don't like them.
How do I get rid of them to reduce clutter?
View 1 Replies
View Related
Nov 21, 2008
My production workflow involves about 20 PSDs that are updated on a weekly basis. Each PSD has 4 groups with new product images added every week. Every few weeks, to keep file size down, I like to delete all but the most recent product image. I'd like to automate this. I'm curious if this can be done without scripting? As is right now, each layer is given a distinct layer number - If I record an action to delete layers, it only deletes the layers with matching numbers... ie if I record the action to delete layer 147, layer 147 has to be present to make the action work.
If it can't be directly accomodated via an action,
View 5 Replies
View Related
Dec 15, 2012
how to delete layers/items from the 3D layers panel? Specifically, 3D layers that have been merged. I merged few 3D layers and need to remove some unwanted items that are left behind.
Â
It would seem like a simple task but I've ended up with one 3D layer in my layers palet and a list of layers in my 3D palet that are all locked. Is this normal? Attached is a screenshot of both layers palets and my doc mode, just in case.
View 2 Replies
View Related
