way to create a templete with about 3 differnt sized rectangles in it were you could drag a simular sized image into the seleted area and it automatically resizes it without croping?
View 3 RepliesCS2 won't run, says activation code no longer usable. Been running win7 on this system 3 years. Adobe says it won't activate in win7. Well, it did, and ran just fine. what's up?
View 5 Replies View RelatedI found drop shadows and bevels!
Is there an effects palette? How about layer styles? Where are they?
Are effects make for pse3 usable in cs2?
Is Adobe Bridge usable in Elements 10
View 2 Replies View RelatedI can be online with a browser (Lenovo Thinkpad, lots of RAM, HD space) and have quick online response browsing to any Inet site. My six students with PCs and Macs using LR 5.3 in the Map module all get online by WiFi (Guest in the school building) in the same room. We're all on that same Guest network. At my home office with that computer, the Map module works perfectly on my WiFi LAN.
But in class, my laptop won't show the map that they are seeing. My map screen in the Map module is just black, and LR reports that the Map module is offline. The rest of the screen in that module looks normal. I test for computer being online at the moment = yes, and with wideband response. The connection is very good and responsive. The screen used to show the gray world map when it was offline, and recently the screen map area is just black. I disconnected the projector VGA cable, no change.
This happens consistently, every week - in the Map module they see the map, I have a black screen. Hard to teach when you can't illustrate.
What is going on in just that computer with identical software to students' and just when on that network when everything else works fine on my computer and theirs on that network.
It doesn't look like a hardware failure. There has to be a setting --- ? --- but there's nothing in the Prefs or Cat settings.
I'm new to Illustrator and trying to simply just add a drop shadow to some various texts. It would seem to me that when you enter text, all you would have to do is highlight and the drop shadow option should be functional. However, that's not the case.
View 1 Replies View RelatedAfter almost perfectly working about 1 month long, PSP X6 now crashes in both versions, 32 and 64 bit, right after start. It displays the manager with the pictures from the folder used last time, then the HD is turning some 5-8 seconds more, and then comes the crash.
System: Win 7 64-bit SP1 german
Problem Event: BEX
Module: MSVCR90.DLL
Version: 9.0.30729.6161
It did work until a week ago, when I last time used it before today, since then the only software installed were updates for Adobe Reader and Flash, and the usual Windows defender signatures update, nothing else was changed on the system.
Reinstalling Visual C++ 2008 SP1 32-/64-bit (above DLL seems to be part of it) didn't work, uninstalling and re-installing PSP X6 neither, nor playing around with the DEP settings, as advised by some MS MVPs on the net. PSP X4, still on my machine, does work.
Not that it matters, I don't think, but I have been unable to burn an ISO file onto a usable DVD. In the Sharing module of VS Pro X6, after opting to burn a DVD, I select both "Create Folders" and "Create Disc Image." Both are created where I send them and I have no trouble creating usable DVDs by burning the folders onto a blank DVD after telling the Cyberlink burning software that I'm creating a video DVD. But I can't figure out a way to burn the ISO file disc image onto a DVD except as a data DVD, which, unsurprisingly, does not create a usable video DVD. (Cyberlink, at least, will not recognize the ISO file or the folder that it's in to burn a video DVD.) Is there a way within X6 to burn video DVDs from the saved ISO disc image (or from the saved folders for that matter) without re-rendering the video clips? (Also, while I'm asking, I take it that there is no difference between a DVD created from folders and the same content created from an ISO image. If this is right, why the two options?)
View 13 Replies View RelatedHow Do I crop with Paint .net. The cropping tool is not usable on the version
View 4 Replies View RelatedHow to get this part into a usable flat pattern. I received the part originally as a stp file. I am running autodesk Inventor 2010.
View 9 Replies View RelatedI am wondering if there is a way that you can use the geometry from Architecture in Inventor other than just a visual concept. I am trying to create buildings in Architecture then import them into Inventor. I have tried the "Sync Inventor" command but there is no usable geometry when it is imported into Inventor. I have used Navisworks to show the building layouts but I am needing to be able to take measurements and possibly constrain to walls or other solid objects.
View 3 Replies View RelatedWe work in space management and deal with associative spaces every day. As a platform we use ACA 2012, with out own Add-on tool (whch simply groups ACA's own tools in one).
We have issues on a daily-basis with the usable boundaries of associative spaces (the green line indicated in the example attachment). Generally when a floorplan is simple, consisting mainly of 90-degree angles wall intersections, everything works fine. However when we work with floorplans consisting of arched, or even more often slanted walls or walls that meet at different angles, the usable boundaries' lines tend to create a "spike" (labled B. on the attachment) which extends outward from the plan, thus creating i.e a 28m2 space out of a 13m2 space (labled A). We use our own calculation standard, however using BOMA or SIS the issue occurs in the same manner, using SIS its even worse.
Generally we solve these issues by changing wall justifications, deleting and re-creating spaces, etc, etc. This can be a very tedious process, one which takes a long time and time is of the essence!
We are aware that by making the spaces non-associative, we can then manually edit the usable boundary, however this is not an option as we handle a great deal of different floorplans each day, and these plans are updated frequently, so we do not want to send out a drawing which has a problem like this because the next person who edits some of the spaces will most likely come across the same problem again.
Is it by any chance, possible to make tools as plugins usable in the "normal" working space, not in a new window? Also, adding something like this:
View 8 Replies View RelatedDoes Inventor actually model threads? That is, would it produce a usable male or female thread if 3D printed?
View 4 Replies View RelatedI am trying to create a GIF using CS3. I have read the discussions on Adobe but I get to a stage in the instructions and it is not working for me. I have 6 jpeg photos, and i bring them all into one. All photos are named different. After reading the forums, the next step is FILE>SAVEAS. Next, you select COMPUSERVE.gif. Once I select that, I have no idea where to go.
View 5 Replies View RelatedI'm trying to create a DVD (to view on a DVD player to show on TV) from a photo story using the Timeline in PS6. the correct way to burn a DVD?
View 1 Replies View RelatedIn PS CS4.I am trying to make a .pdf to send to a printer. I do not know if the printer as CS4. Eventually I will ask, but..I made a pdf in Photoshop, basically using the High Quality print settings.Normally, when I open a pdf in Photoshop that was made in Photoshop I am able to see the layers, adjustment layers..etc..I tried opening this .pdf in Photoshop 7.0 & it had asked me to rasterize it with that dialog screen, although I did have Preserve Photoshop Editing Capabilities checked.
View 4 Replies View RelatedHow do I create an arc in Photoshop 5.5 or 6.0?? I want to connect two staright lines with an arc, but I can only figure out how to create an ellipse or a circle.
View 6 Replies View Relatedknow of a technique or a filter to apply that will create 8-bit looking art out of an already existing image?
i feel like i've done this before with a tiling filter, but i'm not seeing it on CS3.
am i gonna have to trace over the image on a layer with a square brush? seems like there's gotta be an easier way. a plug-in someone knows about perhaps, or a series of steps maybe?
I want to create a droplet in CS6 that I can drag lots of images to and simply have it resize those images and save them to a new folder. I create an action to change the image size and save the images to a folder as a .jpg. I then create a droplet based on this action. I tried several times to drag images onto the droplet, though as it goes through the images it prompts me with questions as it is saving the images, and it never actually saves the optimized images to a folder.
View 1 Replies View RelatedI created a new file, set my sizes and all that, 8bit and began...I literally am using the line tool to make a straight line vertically, I then want to use my brush at 2pixels and 100 hardness to "stroke path", I set my brush then select path selection tool and right click on the line, but "stroke path" is grayed out? I really don't understand. I am following these directions from a website on how to create postcard back.
this is what i was following:
Create a new document with the same exact specifications used earlier for the front. Grab the Line tool and draw a straight vertical line shorter than the postcard’s height, and then place it slightly off center. Set your brush to a size of one or two pixels with a hardness of 100 percent. With the Path Selection tool, right click on the line and choose “Stroke Path.”
I just installed a fresh CS5, we are using some scripting that's installed on 5 other CS5 machines and this never happened before - when files are being saved (using 'save as', overwriting the original) this particular setup is saving xml files too!? See below
View 2 Replies View RelatedI'm creating a criminal line out background . I'm using the line tool to create the lines. I have renamed it in the path tool created a clipping mask but when I flatten the image once finished the lines disappear.
I have also tried creating a new layer naming it putting it between my copied layer and background but once again when flattening the image it doesn't keep the lines. I'm using CS4 .
I have been using photoshop for years. recently everytime i click create new file or open existing one, when i do, nothing opens. I can see the layers but i cannot see the workspace. Its like its invisible. How do i fix this? I am woking on a mac book pro and bought cs5.1 last spring.
View 1 Replies View RelatedI'm trying to create some templates, as I'm really loving the smart objects features. It really plays along with the style of graphics I make, which is basically custom objects.
View 3 Replies View RelatedI am running Windows 7. I created an Action in Photoshop CS6 that includes placing a rectangle and a logo on the bottom right hand corner of my images and then centered in the middle of the rectangle is text of the event (Event name, Location, Date). After creating everything, I flatten the image, resize it down to a size reasonable for the web, then I save the image to a folder, close the document and click on the STOP button in the Actions panel.
Afterwards, I go into File>Automate>Batch and choose the Action that I just created. In running the action, I notice that the text that I placed into the rectangle on my document is now scaling down to a considerably much smaller size than what I had it set to.
How to create a slideshow in PS 12.0?
View 4 Replies View RelatedSo I have been trying to create a gif from a video I went to File > Import > Videos to Layers but all the layers always end up white instead of showing parts of the video like in screenshot below:
It showed the video and played it the first time I tried it but I'm pretty sure I accidentally clicked on something that won't let it show the video anymore and I can't figure out how to undo do it.
I'm messing around with a project for fun and I'm wondering if any of you guys know a great way to make a realistic bar code/UPC image with the thick and thin, black, vertical lines aligned up horizontally? I tried this approach into creating one, but it just wasn't working for me. Here's the method I tried to use (in case some of you have a similar method).
1) Layer 1, start with a white background (hope I didn't lose anyone with this step ;P).
2) I added a Noise filter with the settings of Monochromatic and Gaussian Blur at 400% on Layer 1.
3) Then, I applied the Motion Blur filter 90 Degrees and had the distance set to 999 pixels.
4) Then, I tried to do some adjusting with Curves to brighten it up because before this point, it was just a black and gray image.
And this is where I came close, but no go. I haven't been able to turn the gray into a solid white and I tried using the Magic Wand tool to just select the gray areas and fill them in with white, but that didn't help cause it was blurry and it wasn't all one shade of gray. Any help or if you know another method is doing this will be helpful. Yah, I could just use the line tool and just create thick and thin vertical lines all the way across, but just wondering if anyone else had a better method.
could someone explain how to create a command key for an action?
I have created custom actions and would like to assign them to different keys such as F11...
I'm trying to create a few sigs but being a photoshop rookie its gets tough trying to match the vets. I've done some tutorials on creating cool text effects and I've made some images I like. How do I get the two together? When I tried I lost the effect on the text.
View 8 Replies View Related