Photoshop :: Creating Chop Signature For Illustration
Mar 8, 2012
I'm working on a picture book and I have a set of illustrations by two different artists. I want to put an initial on each illustration to indicate the artist, and I'd like the initial to end up looking like it was stamped on with a Chinese Chop I have the illustrations scanned as TIFFs and I have also scanned an initial "stamp" for each artist as TIFFs.
What is the easiest way to accomplish this? (I tried unsuccessfully to make a custom shape.) I have PS-CS5 and an iMacOS10.6.8. I'm eventually putting the book together in InDesign, with some pre work in Photoshop.
View 5 Replies
ADVERTISEMENT
Nov 21, 2005
i have two weeks to produce a persoanl promotion, so thinking i had done what was necissary, i used illustrator to produce some lgihtbulbs and the filament was the signature, it just so happened that my signature looked like a filament!
It got slated...got told that what need to be done, and was very doubtful i could do it, would to take a photo of the lightbulb with the filament made inside... where will i ge that from!! Dont think so
So, because i'm fairly compitent on photoshop ive decided to shop it up.
Only problem is im unsure really how to go about this... its quite difficult i find to get the lightbulb looking perfect and also to make the filament look like its iside the lightbulb and glowing.
View 9 Replies
View Related
Mar 21, 2013
i am new to Adobe photoshop, and cannot figure out how to create a customized logo/signature to place on all my photos
View 1 Replies
View Related
May 24, 2005
The original is an '06 eclipse... and the others are a concept RWD model heh
Changes made:
-the roof was chopped 2 inches to give a lower look
-back end was streched a bit to give more of a RWD look
-molded kit
-custom front bumper, skirts, rear bumper
-cf splitters
-cf spoiler
-cf hood
-custom cf on the door
-cf accents on front bumper
-scoop
-intercooler/turbo
-iforged 19" rims
-brembos
-lowered 2.5"
-shaved handles
-tinted windows
-custom headlights
-HIDs
-burnout
View 9 Replies
View Related
Mar 20, 2007
I have my letterhead 8.5 x11 typical letterhead in a PSD file.
But for e mailing I want to get creative.
I want to chop off a 1/2 of the white space and cruch together the top part of the letterhead with the logo with the bottom strip which has my address.
View 9 Replies
View Related
Sep 30, 2012
Is there a way in PS5 to chop up an image into squares via a grid and rearrange them? Other than making a bunch of little individual images?
View 3 Replies
View Related
Aug 6, 2013
This was really easy using fireworks, how I can do this so I can get a transparent background.
View 1 Replies
View Related
Sep 17, 2008
How can I create an illustration like this? use PS or Ai
the shine out effect and gradient is outclass,
View 1 Replies
View Related
Oct 30, 2008
how to achieve this effect starting from a photograph?
View 1 Replies
View Related
Jun 29, 2013
I have a vector based illustration of 32 panels laid out, that make up the panels found on a football. I also have a 3d object of a 32 panel football. Is there a way of mapping the illustration onto the 3d object using Photoshop CC?
View 5 Replies
View Related
Jul 13, 2006
See this picture where you'll find a girl's picture on which I worked and tried to convert it in an illustration or vector-like.
You'll see the DOG & Man's picture under that, I wanted to do same like that picture but my result is different, actually mine is dirty. Dog's and Man's colors are visible but mine turned into completely black.
Do you know how they convert that picture into illustration or is it a real vector file?
how to convert an image into vector-like shape.
View 5 Replies
View Related
Jun 15, 2006
how to make this and ive been wondering if any of you guys can help me figure out how to do it. I want to get a picture of a persons face and then convert it into a metal mario looking thing, like a metallic face.
View 8 Replies
View Related
Feb 16, 2005
If this is simply the work of a photoshop filter, I'd love to know the technique. Anyone have any info on how this was done?
View 3 Replies
View Related
Mar 23, 2013
I am trying to find a nice effect which will create pastel illustrations from my photos. I think it is done in PS by turning the photo into black and white first then using Oil Paint filter to work towards the soft effect I am after. I can't find a way to get this effect in my PSE 11.
View 13 Replies
View Related
Jun 8, 2012
I have a Windows user running Adobe Illustrator CS 5.1. SOMETIMES when she tries to save an Illustrator file over top of an existing Illustrator file, or over top of an existing PDF that she opened in Illustrator, she gets the "Can't save the illustration. The file may be read only, or the file is in use by another application, or you do not have the required permissions. . . ID = -54"
We are saving it to a network location, and to answer the obvious questions - she has rights, the file is not read-only and no one else has it open. If we save the file to her desktop, we can then overwrite the file back on the original network location. If she reboots her computer, this usually clears the issue up for a few days/hours.
All available updates are loaded, and it seems others have the same issue, but I've never seen a good fix, other than save it to your desktop, and then overwrite the file.
View 4 Replies
View Related
Jun 6, 2012
I am using InDesign CS5 and Photoshop CS5 and have scanned full color illustrations into Photoshop. I am preparing 7x10 saddle stitch and casebound books with the illustrations which need at a 1/8" bleed area. My problem is the illustrations have key elements right up to the edge of them. I need to add complementary colors to fill in the bleed area around them so I don't lose any of the originals. What is the best way to do this? Also, I need to copy colors from the illustrations and make separate pages of the colors to import into InDesign. What is the best method to do this? The colored pages will be the background with story text on them and reside opposite to the illustrations.
View 3 Replies
View Related
Jun 6, 2010
I've had this 'Can't Print the illustration' window - brand new CS5 suite, brand new computer - 4 days old (Dell, 36bit - would prefer a Mac but there you go).
History - large format packaging file - 600mm x 1200mm. Line drawings. Black and one spot (Pantone) color only. Job needed original English version converted to Chinese language. This had to be done on an older 'chinese' PC in Illustrator 4 with correct Chinese fonts. But after the translator did her job, I needed to return it to CS5 on the Dell to make alterations. Chinese fonts converted to outlines for transfer. Once alterations done, tried to print and got the silly can't print message.
prints fine from Dell in PDF format.
prints fine from Dell in jpeg format.
prints fine form old 'chinese' PC in Illustrator 4 format with either outlined fonts or fonts.
havent had any problems printing anything else in CS5, just this one job.
The only thing I can think of is that there was a problem when converting the Chinese font to outlines there were too many points created and either Illustrator or the printer cracked the irrites.
Although I have been using Macs/PC's and all Adobe programs for over 25 years I HATE trying to figure out this stuff and prefer to just be an end user without trying to figure out why a perfectly reasonable request goes odd.
View 10 Replies
View Related
Jul 19, 2011
I have a bunch of images that look like and I want to 'restore' them like
Unfortunately that took an inordinate amount of pixel-fiddling to do and I have over 80 more of them.
Even more unfortunately, that was an 'easy' image compared to some of the others:
Another easier one
I know basically nothing about image processing and my current workflow looks like: irfanview: convert to grayscale ms photo editor: adjust contrast ms paint
View 4 Replies
View Related
Aug 14, 2013
I am trying create an illustration in paint.net that will later become a button in another program that an end user will click on. This button needs to be the shape of a circle. Unfortunately, when the circle button has a square transparent background, the user can also click on the background to trigger the action. I dont want that to be an option, so I am trying to delete the transparent background so that all I have is the circle image. Is this possible to do?
View 7 Replies
View Related
Nov 7, 2012
I have however come across a real doosey - with a meeting to show the work inside this corrupted file.. tomorrow morning! love it. I'm a junior and I'm afraid of the extent my balls are on the block with this hiccup.
Placing the file in a separate AI file wasn't a solution because I am such a messy worker (outside artboards) and could only obtain a small snippet of the overall file.
I also tried turning on file recovery in Preferences>Illustrator CS5.1 Settings and the file that was recovered was blank.
It may also be of use that I was working on this file on another computer before coming home, and spilling beer in shock, denial, and disgust that I had lost many many hours of work.
View 16 Replies
View Related
Sep 17, 2013
OS X - 10.8
CS6
Windows Server 2008 Share
This error is reported when attempting to save an illustrator file over an existing file with the same name. Yes saving it to the desktop and then copying it over the file on the shared drive works. This is not a solution for us. Full access has been granted to the user on the network share being used.
View 3 Replies
View Related
Nov 20, 2013
I have done an artwork and hit save, when I reopened my file, my illustration has converted to image, the amazing thing is: just very few part of my illstration has covert to image. I didn't resterize any of my illustration and I have done all my illustration in one file, the rest of my illustrations are fine but two illustration which are in the clipping mask are now images....
View 2 Replies
View Related
Jan 21, 2014
I tried to open up my saved illustrator file, but this message box appeared on screen.
<Can't open the illustration. There is not enough room for the window; increase document area and try again.>
I do not understand what this means. The file that I tried to open wasn't a big file. I tried to make a new illustrator but it pop up same message by the way, my computer is not mac. I'm using windows 7
Illustrator tool menu still poped up looks like on mac computer and you know that windows7 should be like that!!
View 1 Replies
View Related
Aug 10, 2013
"Can't open illustration. File is locked or in use. ID = -54" shows up when I try to install the Ai2Canvas.aip plugin on my Macbook Pro. I'm using Illustrator CS5. What do I have to do to make this plugin work?
View 3 Replies
View Related
Jun 11, 2013
In the above image, certain paths have some kind of brush effect or shading effect (as evident in the path above). I'm wondering, how can I remove whatever effect this is from all paths in the above shape, I don't want to have it.
View 4 Replies
View Related
Feb 11, 2009
i want to add a layer including my signature or type etc... to hundreds photographes.
i am just dragging layer to next file and and and...
there is a script(export layers to file) in CS3's file menu but i couldnt run it...
View 2 Replies
View Related
Feb 25, 2003
I was wondering if you had any tips on making a nice signature to sign work with. If you have any recommendations for some beautiful cursive text to use for the signature, that would be great too. I don't have a scanner to scan my own signature to make it into a brush but I would like to make one into a brush. I'd like a nice glowing effect, not too much, just a bit of a shimmer to it.
View 2 Replies
View Related
Oct 26, 2012
Just upgraded to CS6 and get this error frequently. This is a major problem for me because linked files and document management are essential to my business.
Running on Windows 7
Can’t save the illustration. The file may be read only, or the file is in use by another application, or you do not have the required permissions. Please save the document with a different name, or in a different folder or directory. -54
How to correct this
View 3 Replies
View Related
Mar 6, 2014
I do traditional b/w pen and ink illustrations. How do I edit the ink tones in cs6? In Photoshop it was very easy - seems terribly confusing in Illustrator.
View 6 Replies
View Related
Jul 13, 2004
I came past a signature from someone on another forum and was astounded by it. Especially the framework is done really nice in my opinion.
Now since i'm a forumholic and want to make one of those of my own i was wondering if any of you could give me some tips or a tutoriual where everything is explained step by step.
The sig i'm talking about is this: ....
View 2 Replies
View Related
Jun 26, 2007
how to make a web signature that looks like a simple ID badge. I am trying to create a standard signature for use on the forums that support a faction within an online role playing game i am a member of. The basic image I have in my head is this. A white or maybe grayscale/silverish back ground layer, with the standard techy inlays. a spot in the top left corner for each individual members avatar. Then pushed off to the center-right side, their information, I.E Rank, name, email, member identification number. With a barcode font on the bottom. Finally with the faction logo well cropped and placed to be an underlying layer below the whole thing set at a very low opacity.
View 1 Replies
View Related
