I so often admire pictures where one item or such is in color while the rest of the picture is black and white or sepia. How do I do that? Im sure its simple but I am a photoshop rookie and dont know much.Can anyone help me?
View 4 RepliesHow do I make a photo sepia and leave an item in the photo the original color?
View 1 Replies View RelatedI am a beginner. I am looking at different progams to see which one suits me better and easy to work with. So far adobe isn't easy at all. Is there a way to take a black and white photo and make one thing in the photo in color? I have elements 11.
View 3 Replies View RelatedHow to turn a color photo to B&W with spot color ... but what I cant find a tutorial on is how to turn a color photo sepia, but also spot color. I have a wedding photos that I think would be a fun shot to play mixing those colors together . I have searched for the info earlier today and wasn't successful .
This is a big learning curve and trying to figure out all the tools and layering process.
After converting a color photo to black and white, the image that prints out has a sepia tone to it. The image looks black and white on my screen and when I print a black and white image directly from the internet, it prints out in good black and white mode. What adjustment is available to get rid of this sepia tone?
View 1 Replies View RelatedI'm trying to restore a very old photo in sepia. It has stains and discoloration on some part of the image. I need help on the basic steps for this project.
View 5 Replies View RelatedQuestion - is there an easy (or not so easy) way to make a photo with sepia tones?
View 2 Replies View RelatedI'm looking for an effect/filter where i can turn a normal photo into an 60`s-80`s magazine photo, where the tiny microscopic circles of yellow-red-blue mix to make the correct colours, like machanic pointalism, where the image collapses if we look at it too close. I have no idea what to call this, I`d love to know. I`ve looked at the halftone effect, but it only seems to deal with two colours. is there any simple filter that can give me this effect simply?
View 3 Replies View RelatedA process to turn a color photo into a sepia tone? Just dropping a dark color on the photo doesn't seem to work very well because it just masks the detail.
I've attached the photo, I am working with.
anyone know can give me a action to convert color images to black or sepia?... i know you can use channel mixer but i can't seem to get it right...i guess i don't know much about color.
View 2 Replies View Relatedhow to make sephia effect but show or enhance 1 original color?
View 4 Replies View Relatedhow to change a colour or black and white photo to sepia
View 1 Replies View RelatedI turned off the split toning, but my photos are still in sepia tones , I use Asus Vivobook S200, Windows 8.1. I think this is weird, because this problem does not happen in Lightroom video tutorials in Youtube
View 3 Replies View RelatedI am trying to convert a full color photograph into an image with just a few colors.
The purpose is to allow the photo to be embroided with color stitching. I envisage the final result will be a diagramatic representation of the photo.
Is anyone familiar with the photoshop tools I can use to play around with and automatically convert the photo to just a few colors?
I'm taking the time to edit some of my nicer/older outdoor photos that were taken in jpeg format in Photoshop CS3 and then on to printing with an Epson 3800. I've been told that files I want to print I should make sure that I'm set to an RGB color space (1998), get icc profiles for paper, have photoshop manage colors, etc.
This is all going great! However, I've recently read online that to truly show the full potential of one's photos, those jpeg's should be converted to a TIFF file format...especially when printing (I'm now taking everything in RAW format, but I still have to take care of some of these nicer jpeg's).
Have done several prints comparing same photo in jpeg & tiff and tiff definately is higher quality. Now..my questions concern some of the settings in CS3 when I chose 'Save As' - 'Format' = tiff. Code:
After creating two adjustment layers and then selecting the background layer, i attempt to convert from RGB color to LAB color but get the following warning: "Changing modes will discard an adjustment layer; change mode anyway?" and if i click on "OK," an adjustment layer disappears. Why does this happen and how can i prevent losing an adjustment layer. i am using CS2 and have a 16 bit image file. (i am converting to LAB in order to sharpen and will subsequently convert back to RGB ).
View 3 Replies View RelatedI need to convert a layer so that it is only one color(black). It can't have any other shades in it. I tried color overlay, but there are still little spots where there are shades of grey on the outsides of the graphic,
View 2 Replies View RelatedI have two photos, shooted probably the same day, by the same photograph in the same place !But the pose is a bit different. first one is in high resolution and in black & white nuance. second one is a small resolution and in full colors.
I wish re-color the black&white photo using exactly the same nuance from the colored one.
can i "copy" all the colors from the color-one to the b&w one ?
i hope there is a quick way to do that with adobe photoshop or with a commercial plugin. Something like : i load the first one (color), i load the second one (b&n), and i press Ok and magic appears !
here are the photos :
the black and white to recolor
[URL]..........
the source color to use
[URL].........
I like to go into LAB mode to boost the colours on my photos. I have created an action that converts to LAB, applies a couple of curves, and then converts the image back to RBG. I created a droplet with the intent of using the droplet in Lightroom. My plan was to apply to a smart collection of photos. However, the droplet says that the convert is not available. What am I doing wrong? Am I approaching this the wrong way? Is there a better way? I take team photos and I have HUNDREDS to do. This droplet will save me DAYS of editting time.
View 1 Replies View RelatedGot specs for converting a print ad to jpg for ATM: 800wx600h; 72dpi; 256 colors. As far as I know, the only way to get 256 colors is to convert to index. When I do, the halftones get slightly grainy.
Also, I can only save the file as .psd, not .jpg as required. How to convert my file to 72 dpi jpg with 256 colors.
Whenever I use this to convert a colour image (or even a black and white one) to greyscale, the image takes a leap in brightness (gamma?), despite the Preview showing otherwise. I've used the default (set at 15% dot gain), even taken the sliders down to -200%, it makes no difference. How do I maintain the brightness when converting?
PPX6 (64-bit)
Is there a sepia default that CS3 has?
View 7 Replies View RelatedI have simple outline drawings - like stars or paisleys - that I scan into PhotoPaint X5. So, to turn it into a vector drawing, I manually fill the outline drawing with the paintbrush, convert it to 1 bit, import it into CorelDraw, use the Trace Bitmap - outline trace - clip art, then do a hairline outline and remove the fill. I end up with a hairline outline of the original object that I can send to my laser. The objects must remain the same size as the original drawing.
Here's why I do some of what I outlined above. First, I manually fill the drawing because if I try to do the trace bitmap in CorelDraw X5 using the outline trace, it traces both the inside and the outside of the original line drawing because the line is thick. If I try the Trace Bitmap and select Centerline Trace, I the result is a jaggy line which won't work.
I think what I need most is a way to fill the object automatically rather than paint the inside of it. I thought I could just select the object in PhotoPaint and click on the fill, but it seems that the "object" is the outline drawing plus the background, so the fill ends up being the whole "object" including the background. I can Lasso the outline drawing and move it around on the background, but can't figure out how to do much else.
I want to create a a texture for a 3D model of a human head - I don't have the original template but I do have these examples which I can use as a template. [URL]
I think for the moment I'll skip the mouth and ears and eyes aren't so hard to sort. What I can't find however, is any information on how I would go about making the face, hair and neck. What seems easiest for a cack-handed individual such as myself is to use a photo (flat-lit, straight-on, neutral expression, unobscured) of someone's face and then deform it and use some clone-like tools to fill in any gaps.
Obviously I'll need to match the coordinates of particular points on the face and keep large sections entirely unmodified. Then I'll need to do some sort of cloning or smudging to extrapolate bits of the head I don't have.
Well, is it even possible to work from a photo (or couple of photos).
I have a PDF that I know is 300 dpi. When you view the PDF, even at high magnification, the text on it is sharp (i.e., there is no pixelation).
I need to crop the PDF. So I opened it in Photoshop and, for reasons I cannot understand, SOME (not all) of the text on the page becomes somewhat pixelated after I open it in Photoshop.
Once I save the new doc as a PDF, that same text it is much less crisp than the original.
I haven't changed the DPI or the color settings of the PDF in Photoshop.
Im trying to get this effect, doing saturation, levels, curves or whatever doesn't really get this effect... anyone that has more precision details or numbers something that I can make it look like?
View 2 Replies View Relatedway to add a Sepia affect to an image.
View 7 Replies View RelatedI should know this .... but how do I turn black and white into sepia?
I'm using Photoshop CS3
Converting the standard RGB file to CYMK is a simple click, it looks the same on screen, but there is a huge color shift when it's printed. Everything is much more blue and with more contrast. I've worked with the different color models trying to adjust my image to get it more close to the original, but it's not going so well.
View 5 Replies View RelatedI haven't found a way to turn a color photo into a Black & White outline drawing in Corel PhotoPaint X5.
View 11 Replies View RelatedI want to get the circle-texture-thing in the sky but I'm not sure how to go about getting this.
View 2 Replies View Related