I work on an image, be it a photo or a little icon or banner and get the colours looking just the way I like but when I go to upload it on another forum or on facebook, the colours all look as though they've been drained or faded away.
View 3 Replies
I know how to crop pics to get rid of unwanted image, but how do you straighten up buildings which are 'leaning' over? I've got some pics of tall buildings and want to s-t-r-e-t-c-h the tops of them so that they look vertical cos they look a bit strange at the moment.
View 1 Replies View RelatedI was wondering how to make an effect of falling money on my banner that I have.
View 7 Replies View RelatedConsider a photo with the buildings are falling over backwards for the obvious reason. In Photoshop CS2 one could select Crop, click the “Perspective” box, then drag the top corners independent form one another to align them with some vertical lines in the photo. If there is no vertical line near the edge, one could temporarily drag the side of the crop tool to a vertical line before using the top corner to slant the vertical side of the crop tool to follow a vertical line in the photo. Then drag the two vertical sides of the crop tool back so that their bottom corners coincide with the bottom of the photo, double click, and your building has vertical sides. How can I do this in Elements 12?
View 2 Replies View RelatedIs it possible to get written instruction on moving falling snow for pse 9 / mac.
View 4 Replies View RelatedI've set up a bunch of dynamic rigid bodies & a static rigid bodies for my floor. Why are some of them stopping at the floor & others are falling right through it?
View 5 Replies View RelatedI'm pretty new to photoshop, and I've started on a personal project. I want to basically take a video still from a music video and turn it into a poster. Sadly i can not find a good quality version of the video as it is older and not super famous, (kyuss-one inch man). So i found an online video that is better then youtube but not great, and i captured it through the vista snipping tool (screen capture).
Basically I want to take this low quality picture, and turn it into a good quality poster (not huge). What techniques and things must I do? I'll probably have to find a printer near here and require a specific dpi as well.
If you have two balloons falling down on each other, can mCloth interact with the balloons or can the balloons only react to a item like a rigid block?
View 1 Replies View RelatedI can create basic animations and use layers to some degree. I'm using GIMP 2.6. I want to create falling snow on a small picture I've already created.
View 4 Replies View RelatedI have a track that uses gravity to pull a ball along it. I have gravity entered in my simuation but I cannot get the ball to move. How can I give the ball the ability to move in each direction.
View 6 Replies View RelatedI've been using Xsplit to record games while I play. I recorded a ~2 hour video and toward the beginning of the video it seems to be pretty a-okay but later in the video when I play it in premier pro, the audio starts falling out of sync.When I play the original raw video the audio and video are both on time.
I read somewhere that the reason why the audio was out of sync was because xsplit uses a "variable framerate".
Not sure if this is true or not, but regardless, I tried exporting numerous times and the audio STILL falls out of whack. I looked on xsplit and there was a setting that i could enable to force constant frame rate..
I'd like to make an animation on which one can simply see snow falling down. I know this is easy to do with the CC Snow Effect. But what I didn't find an answer to is: I want to make the snow stay on the ground so that in the end the ground is covered by snow.
View 3 Replies View RelatedSo I've recorded some footage on GoPro Cameras at 1080p at 29.97 fps. The audio is 48000Hz.
I've recorded audio using Two Zoom h4ns simultaneously. One is at 44100 Hz at 16 Bits and the other is at 44100 Hz at 24 bits.
Now I've tried both a 24fps sequence and a 30 fps sequence, but neither of Zoom recordings match the video, they start off in synch (because i synch them) and then fall out of synch (obviously).
Is it that they fact that they were recorded at different Hz or fps/bits affect it? Is there any way to fix it that wouldn't destroy the footage aesthetically?
I came across an amazing Inventor animation on YT. Its a ball that rolls down the ramp, falls into/thru a hole and realistically moves objects it touches. How is that done?
How is that possible to achieve that effect of free falling/gravitation?
i want to know how to make a realistic single water droplet falling from the sky
View 1 Replies View RelatedI'm having a hard time illustrating two things: (1) grass (2) falling snow.
View 7 Replies View RelatedI have managed to make a flake in Edge to flash randomly after following a tutorial on lynda.com
My javascript knowledge is fairly limited but I used the following code on a trigger inside the flake symbol I made:
var randomFrame = Math.floor(Math.random()*5000);
var maxWidth = $('#Stage').width();
var randomX = Math.floor(Math.random()*maxWidth);
var randomY = Math.floor(Math.random()*300);
sym.play(randomFrame);
var myName = sym.getSymbolElement();
$(myName).css({'position':'absolute','top':randomY+'px','left':randomX +'px'});
This all works as a randomly appearing flake which doesn't look like snowfall. How to make the symbol float down from the top of the stage and repeated lots of times to look like snowfall?
My problem is related with the quality of a image.
My question is how to maintain high quality (original quality) of a image after resizing it?
If i resize it with same ratio like:
2816x2112px to 1600x1200px (4:3)
2816x1584px to 1920x1080px (16:9)
Mainly i use scale image option in Gimp. But now i need to resize many images for my work so i tried David's Batch Processor to resize my images. After using it, i found there is some quality promble with the resized image.
Then i tried, the scale option with, use quality setting from original image and JPEG quality parameter is 95, in gimp but the problem is same. I did it with also with David's batch processor- JPEG quality parameter is 95.
Other thing is that, the original image 2816x2112px (4:3), size- 3.6 MB is displaying in image viewer with 47% and the resized image 1600x1200px (4:3). size- 1.2 MB is displaying in image viewer with 83%, So my questions are: How can i check the quality of a image after resizing it, means the image is exactly same as the original? Or Is David's Batch Processor maintain the original quality of the images after resizing?. I realy need to resize many images for my work.
Whenever I create a new colour in the colour swatches it only stays there for a couple of actions while working on a project. I understand from others that once they create a colour it stays there. Why can't I get that to happen?
View 1 Replies View RelatedI am using CS6 and the Replace Colour Tool no longer allows me to replace multiple colours when I select the + . So when I have the panel open and I highlight the +, I used to then be able to click on several spots in my image and all of the colours that are in those spots are added to the selected colours that will be changed by using the sliders.
But now, when I use the + it has exactly the same effect as not using it - I can only choose one colour or an other, I can't add.....I want to reset this to the original way that this works.
Currently I have to open the panel, change one variation of a colour, save it, then re-open the panel and do it again (and again and again) until all the colour variations I am trying to remove are are changed. I know I also have the 'fuzziness' slider, but it does not give enough control.
I am designing a T Shirt for my ski club.I have taken an image from a banner (made in illustrator, full colour image attached) and I want to devide into a 3 colour image for the t shirt (I am only allowed 3 colours for printing).The colours I want to use are black, white and purple. The colour of the t shirt is a light blue.I want to then put the purple logo on top of the white and black too.So I'm after a black and white grunge background with a punchy purple logo on the top.All of this should be on a tranparent or, for design purposes, light bue (same as T Shirt colour) background.
how to split a full colour image into using only 3 (4 including transparent/light blue background) exact colours.
If I were going to black and white I might convert to grey scale and then paint areas to fully white or fully black using an overlay brush I don't think this works for me for more than just black and white though.
I have attached two of my attempts where I used the colour range selection and level adjustments. Niether was really successful though (one does not use the right colours or number of colours but looks quite cool).
I will like to find out the colour code for the background colour on a particular web address. Unfortunately I am new here so not allowed to post links so will say this as creatively as possible. the address is theregentlagos (with the usual prefix beginning with w and suffix beginning with c for all websites). I am referring to the colour where the menu items like logo, home, brands etc are on.
View 1 Replies View RelatedI've been asked to convert an image to 2 colour for printing. I have the image as a full colour CMYK layout (with layers), but the whole thing needs to be converted to 2 colour. I have the pantone reference numbers for the 2 colours it is to be converted to. I am familiar with the hue/saturation tool, but this just seems to convert it to one colour, and you have no fine control over the exact colour you want.
View 3 Replies View RelatedI am trying to import photos from my computer to Photoshop elements 11. It has imported most but wont import some as "file quality is too high". How do I get around this? Do I have to downgrade the quality of my photos? To do editing wouldn't you want the best quality photos to start off with?
View 6 Replies View RelatedI have copied some colour negatives using my digital camera. What is the best procedure for removing the orange base colour of the film prior to converting them to positives?
View 9 Replies View RelatedHow do I see the object selected change colour dynamically as I adjust the colour sliders?
It seems the object only changes colour when I release the slider. But I want to see it dynamically change, so I can find the colour that works best without "hit or miss" - "trial and error" behaviour.
Yes... I'm aware some of you spend hours in colour programs creating a palette to work with. Good for you.
I'm just wanting to do it LIVE. Dynamically. In 2013. In Illustrator.
I'm just started using inventor 2013 (from 2010) & the way colours/materials are applied has completely changed so I'm learning again from scratch.
Here's my issue: A customer has sent a casting to me in Parasolid format. When I open it, all the unmachined surface are blue & look a bit garish. However, the colours of the machined faces are ok & I wish to keep them.
So, I want to chage all the surfaces that are blue - I can use the picker & select all the blue faces seperately (by holding CTRL down & select each face one be one) but this is a pain & takes ages (there are over 200 faces)
I can see & edit the blue color in the manager but how do I tell Inventor to replace all - can it be done?
I use EdHarvey's colour tint tool and it changes colour of the whole image, I'm looking for something similar but it only changes selected colour, so that the image is left with mutiple colour scheme rather than just one, any addon that can do this?
From this example, you can see the figure on the right is in a brownish colour scheme, what tool can I use in order to make it's colour scheme blue like the figure on the left?
[gradient tool] I double-clicked the colour stop , but the colour swatch doesn't come outI hv tried a couple of times in CS 5 and also CS 6.
View 1 Replies View RelatedAdobe Colour Management Print defaults seems to be assigning RGB meta to B&W pages and incurring Colour Print charges for B&W prints.I can manually change the print colour management to Printer managed on a per print basis instead of the default adobe colour managed which "cures" the issue but I do not seem to be able to save that setting as the default.
View 1 Replies View RelatedAny method to transform all the pixel of a colour similar to X(in RGB values) to X ?
View 7 Replies View Related
