Photoshop :: Color Seps For Tee Shirt Art In PS

Jan 8, 2005

How does a guy color seperate art for screenprinting in PSCS. I build spot color work in Illustrator, but I want to take my designs to another level and I was told you can design art in PS and sep it for screens.

View 1 Replies


ADVERTISEMENT

CorelDRAW X4 :: Printing Spot Color Seps With Color Name On Each Page

Dec 23, 2011

We print out spot color seps every day using CorelDraw X4. After we print out the plates, I have to cut down the vellum that we print on so that we do not have a bunch of extra blank vellum on the sheet.

We make use of the info that is printed on the lower left of every page where it states something like the following:

S:DirectoryWhereTheArtworkisLocatedfilename.cdr

Wednesday, December 23, 2011  8:00 AM

Plate: 1 of 3

After I cut down the sheet, I then have to hand write the name of the spot color onto the sheet of vellum in marker.

Is there any way at all, to make it so that CorelDraw would actually add the name of the spot color that is printed on each page to the information that is already being printed to the lower left? Ideally, it could be placed in the same area where it's already printing the plate information on the last line.

Could it read:

Plate: 1 of 3  Color: Pantone 375

View 6 Replies View Related

Photoshop :: Changing Shirt Color To Off White

Jun 15, 2007

I have a picture of a shirt that I need to show in several color options. I figured out how to use hue/saturation to get all the colors I need except off white/natural. I can get close to the right color, but by the time I do the shirt looks all washed out.

Attached are two photos. The red shirt is what I am starting with, the white is the color I am trying to achieve. I've tried various combinations of H/S, Levels, B/C, variations and curves but can't seem to get it without losing the shadow detail. I'm using PS6.

View 9 Replies View Related

Photoshop :: Legit Shirt Color Change

Jun 28, 2007

how to do a legit shirt colorchange on the attached picture. The color of the shirt needs to be a solid light color such as white or a light blue, but must look like a real shirt. If anyone could do it for me and tell me the steps id be very much obliged.

View 1 Replies View Related

Photoshop :: Changing Pattern / Print On A Shirt Into Solid Color?

Mar 8, 2012

I need to know if there is a way to change a pattern/ print on a shirt into a solid color while keeping the shadow details and natural bends and wrinkles in the garment?

View 9 Replies View Related

Photoshop :: Doing A T-shirt

Nov 19, 2003

I have look around the web a lot and seen a lot of really nice t-shirts made by designer like me, maybe a lot better. So I decided that I have to do some nice t-shirts for my self, I think they are mostly made by Illustrator. I now the basics of that program and can do a simple illustration but I want to get better really better. So I asking you if you know some Tutorials on the web, they are really hard to find.

View 4 Replies View Related

Photoshop :: Shirt ?

Jan 10, 2005

im trying to design a senior tshirt. the canvas size is 14in. in width and 15in. in height with a resolution of 300. im limited to 3 colors and no values. the schools name is Klein Oak High School and the school colors are gold (really yellow with a touch of orange) and black. the school mascot is a panther.

View 5 Replies View Related

Photoshop :: T-shirt Design

Apr 18, 2006

how can i produce things like this?

View 9 Replies View Related

Photoshop :: T-Shirt Template??

May 1, 2006

I was trying to play around withT-Shirt designs for a summer camp, and I am unable to find a T-Shirt template or something with the shirt design already laid out for me...can anyone point me in the right direction. Im def a Newb @ this..

View 3 Replies View Related

Photoshop :: Make Picture To Put On T-shirt

Dec 1, 2013

I want to make a picture that I'm going to put on a t-shirt for a friend. What I want is to Photoshop the heads of the first two pictures onto the two chickens in the third picture. Also, I want you to add an S written ahead of "HERMANOS" so that it reads "SHERMANOS".

View 2 Replies View Related

Photoshop :: Iron-on Shirt Logos?

Nov 1, 2005

Have any of you ever designed ur own t-shirt?

I looked around on the internet for professionally printed shirts(those are the same as iron on right?) and noticed that all the colors they used, it tends to be a little powdery looking, so I was guessing maybe that kind of colors look better in contrast with the shirts.

What I'm thinking of doing is just make the design's lineart on paper, scan, and color with photoshop. then preview and print on the transfer paper.

View 5 Replies View Related

Photoshop :: Change Sleeves Of Shirt

Jun 20, 2007

I have an image of a shirt with the sleeves facing one direction and I would like to make it so that the sleeves are facing straight up, as if someone was holding their hands in the air.

View 1 Replies View Related

Photoshop :: How To Make A Realistic Shirt In CS?

Sep 14, 2005

I need to extend this girl's sports bra to cover her midriff and look like a shirt.

View 2 Replies View Related

Photoshop :: Bloody Shots On T-shirt

Jun 25, 2008

I want to print 2-3 red stains on white t-shirt to look like I've been shot whit gun and one near neck to look like I've been cut-throated I've downloaded some bloody brushes but it isn't that simple...it doesn't look real enough....how can I accomplish this?

View 5 Replies View Related

Photoshop :: Text On Shirt/Cloth

Aug 7, 2004

how to realistically add a logo/text to the back of someone's shirt.

[Add the letters HV to the back of this guy's shirt]

View 9 Replies View Related

Photoshop :: How To Fix Stain On Fine Checkered Shirt With CS6

Nov 20, 2012

I have a photo of a white shirt with small black checks as a pattern. A large transparent yellow stain needs to be removed. The checks are one tenth of an inch square and one tenth of an inch apart. The original photo is lost and I have it at 200 ppi.

View 1 Replies View Related

Photoshop :: Product Visualization Of Fabric On Shirt

Feb 29, 2012

I am on a conquest to do a product visualization of a fabric style on a shirt (fabric could be a solid color, striped, or checked). I have access to the fabric and can take pictures/scans of the fabric to extract the exact pattern and would like to overlay it onto an existing picture of a man with a proper dress shirt on to see how the fabric would look on the actual shirt.
 
I would like this to be as real as possible so that you could not tell that the fabric was actually "draped" onto the shirt. The result would be something similar to the Perry Ellis website:

[URL].........

whether this can be done with Photoshop or if there is another alternative method I should pursue? I already have an original with my model in a very flat grey shirt that I would like to modify.

View 3 Replies View Related

Photoshop :: Product Visualization Of Fabric On A Shirt

Feb 29, 2012

I am on a conquest to do a product visualization of a fabric style on a shirt (fabric could be a solid color, striped, or checked). I have access to the fabric and can take pictures/scans of the fabric to extract the exact pattern and would like to overlay it onto an existing picture of a man with a proper dress shirt on to see how the fabric would look on the actual shirt.

I would like this to be as real as possible so that you could not tell that the fabric was actually "draped" onto the shirt. The result would be something similar to the Perry Ellis website (where each of the drapes of fabric would be from only 1 original model picture): [URL] .......

I already have an original with my model in a very flat grey shirt that I would like to modify.

View 2 Replies View Related

Photoshop :: T-Shirt/Sport Jersey Designing

Mar 15, 2006

I'm new to Photoshop and want to design a new baseball jersey for my team. Is there any way of doing this on Photoshop and if so, what plugins will I need? I want to be able to see a picture of a jersey and edit the colors, logo, etc...

View 2 Replies View Related

Photoshop :: Extract T-Shirt Design From Damaged Photo

Nov 24, 2012

Some of you may have seen my thread in the Show-Board section about a damaged photo I have restored. On the photo there is a lady sitting to the left with a cream/white t-shirt on, I have been asked to try and restore that bit too rather than do what I have done in the resto.

This is all I have to go on:

Here is the original image:

and my Restoration so far:

They want the t-shirt as well but there is nothing to go on apart from some apparent squiggles, as you can see.

how I can extract it, I can't even make out what it says or else I would try and find the t-shirt and put it in.

View 4 Replies View Related

Photoshop :: Change Patterned Shirt To Plain One And Keep It Natural?

Jan 24, 2011

The man I work for wants a demo cover for a CD. He is wearing a red flannel shirt (it is suppose to be funny/outdoors type cover). The expression he has and every other thing is just perfect but I want to replace the plaid with a color and /or another pattern(such as a dark blue denim). Is it possible to do so without losing the lines/folds of the shirt? I know I can play with the hue/saturation but that still leaves me with the horrible plaid pattern.

View 3 Replies View Related

Photoshop :: Converting Hand Drawings For T-shirt Design

Jun 4, 2004

how i should convert a hand drawing in photoshop to be print-ready for a t-shirt image. i have a friend who is an artist with impeccable talent and i would like to get some of his designs on a few shirts i plan on making.

here's the deal: he can draw the image with shading or he can create it without (sort of like a vector graphic) but what is the normal procedure as far as getting a hand drawing ready for a shirt image? i haven't had him start yet because i wanted to instruct him first on which route to take. obviously, we don't want the pencil color to show but more of a bold darkened look so can i just simply darken the piece in photoshop or do i need to make adjustments in illustrator?

View 3 Replies View Related

GIMP :: How To Get Rid Of Writing On T Shirt

May 3, 2013

is there a way to get rid of the writing on the t shirt to make the t shirt plane and look like the writing was never there .

View 3 Replies View Related

Paint.NET :: Replace Someone's Shirt In Photo?

Jan 10, 2013

I'm using one photo, and I want to put a shirt on somebody in the photo. Here's what my idea is, I just don't know how to execute it. I already used paintbrush and zoomed in on the person and drew around the person's outline. What I want to do, is cut out that person from the picture, basically make two layers using the same photo, but not remove or move the person. Then, I was to import the picture of the shirt and basically put it on the person so it looks like they're wearing it, but put the picture of the shirt in between the two layers, so the background hides the excess shirt. I hope that's understandable.

View 1 Replies View Related

Paint Shop Pro :: Turning A Photo Into T-shirt Art?

Jun 16, 2013

how do you take a photograph and make it into artwork you can use on a t-shirt design? I guess I'm saying so that it looks like a drawing rather than a photo. currently I'm using PSPX2.

View 1 Replies View Related

Xara :: Vector Graphics For T-Shirt Printing

Sep 10, 2011

I want to get some designs I've done printed, the design are pretty simple block colors and shapes, Xara Xtreme 5 is brilliant for doing these designs. However the T-Shirt printers (spreadshirt) want to files a vectors graphics. This is what they say on the site

Transforming objects into curves
Transform all design elements and text into curves.

This is possible with Corel Draw: highlight the part of the design you want to convert. Click on 'set up' - 'transform into curves'.; You may run into a few problems when converting complex pixel graphics into curves. Try to convert as few individual objects and colors as possible. Note: vector graphics for plot printing can have up to three colors per design.

Check the minimum size of the object
After you've converted to curves, you'll have to check every element of the design to make sure that it has a minimum size of 1.5 mm. One trick for checking this: create a small circle with a diameter of 1.5 mm and lay it over the smallest parts of the design. If the area is smaller than the circle, it's too small for plot printing.

Save image as vector graphic
Unfortunately, you cannot just open a pixel graphic into a vector program and save it in a vector format (.eps.) This is not enough. You have to manually make sure the pixel graphic has been converted into curves.

Can I just export as an .eps and it'll work, or do I need to convert to editable shapes then export?

View 3 Replies View Related

GIMP :: Removing Sweat Stains From Shirt?

Dec 10, 2011

for photoshop elements, someone told me to create new layers and use the dodge tool, but I no longer have elements and have switched to gimp.

View 3 Replies View Related

CorelDRAW X4 :: Making Composite Image Of Badge On T-shirt

Mar 17, 2011

I'm a coreldrawX4 user. I would like to print a composite image of my identification  badge on a T-shirt. How would I do this?, should I take it's picture with my cell phone-forward it to my e-mail address then import it into corel or have it scanned and forwarded to me. I don't have my own scanner so I was thinking Staples or Kinkos.

View 2 Replies View Related

Illustrator :: CS6 - Preparing A Logo For Printing On Black T-shirt?

Oct 10, 2012

I'm pretty familiar with preparing files for print in Illustrator and am currently using CS6. However, I'm not at all familiar with preparing files for printing on non-white fabrics (a black t-shirt in this case). I've had a hunt on Google but haven't yet found a simple answer to my question which is this:
 
The logo is red and black on a white background (shown below). How do I make sure that the white area prints as white and not "no ink" as would happen when printing on white stock?
 
There will be a small run initially, so will probably use a heat transfer method rather than screen printing at this point.

View 4 Replies View Related

Photoshop :: 3 Colour T-Shirt Design From Full Colour Image?

Aug 19, 2013

I am designing a T Shirt for my ski club.I have taken an image from a banner (made in illustrator, full colour image attached) and I want to devide into a 3 colour image for the t shirt (I am only allowed 3 colours for printing).The colours I want to use are black, white and purple. The colour of the t shirt is a light blue.I want to then put the purple logo on top of the white and black too.So I'm after a black and white grunge background with a punchy purple logo on the top.All of this should be on a tranparent or, for design purposes, light bue (same as T Shirt colour) background.
 
how to split a full colour image into using only 3 (4 including transparent/light blue background) exact colours.
 
If I were going to black and white I might convert to grey scale and then paint areas to fully white or fully black using an overlay brush I don't think this works for me for more than just black and white though.
 
I have attached two of my attempts where I used the colour range selection and level adjustments. Niether was really successful though (one does not use the right colours or number of colours but looks quite cool).

View 2 Replies View Related

Photoshop :: Trying To Make A Shirt In Photoshop

Aug 6, 2009

am trying to make a fairly basic t shirt design. I have looked at tutorials but can't seem to find insight on what I am specifically trying to do. I'm looking to have a lightning bolt striking a rock, with gradient shapes and possible bits of rock coming out of the rock.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved