Photoshop :: Cannot Find CS6 Autorecovery File To Remove / Keeps Opening On Launch
Aug 14, 2012
I need to delete an AutoRecovery file (.psb) in CS6, it keeps opening on launch. I can't find it on my computer to save my life. I have tried saving the file in various places to see if it takes care of it and it does not. Apparently, it is supposed to be in:
Mac HD/users/me/library/application support/Adobe/Photoshop CS6/Autorecovery
There is not an AutoRecovery folder or .psb file anywhere to be seen in the Photoshop or Adobe library folders, and I have looked everywhere. I have a brand new imac w/ OS x. I have tried searching everywhere for the file and folder, even in places that make no sense. I have searched my entire computer, even visually looking in every folder.
I have read a few message boards and apparently the file should be where it is supposed to be (file path above) and deleting it will solve this issue, but I cannot find it.
View 39 Replies
ADVERTISEMENT
Aug 14, 2012
Is it possible to open a photo with another application, without a pre-conversion to tiff by Lightroom? I love Active D-Lighting, it saves me a lot of shadow/highlight recovery, but Lightroom doesn't support it. I edit most of my photos with Capture NX, but I use Lightroom to catalog them and edit others. I can't find a way of opening a nef file directly in CaptureNX from Lightroom.
View 6 Replies
View Related
May 23, 2012
how to remove following message which appears when i open new / file existing file. This also changes my settings and autocad does not work properly.
View 4 Replies
View Related
Jul 9, 2012
In PS CS3 there was a preference setting to automatically open Bridge when Photoshop was launched.
This setting seems to be absent in CS5.
Is there any way to get both apps to launch simultaneously?
View 15 Replies
View Related
May 10, 2013
I have had this problem intermittently for years with different versions and different computers, but this time it is not going away. I need to use the 64 bit version for large files, but it keeps crashing in several different ways.
1- I open the program from the desktop. It shows the spash screen, shows the workspace for a couple of seconds, and then crashes with the message:
Problem Event Name:APPCRASH Application Name:Photoshop.exe Application Version:12.1.0.0 Application Timestamp:4d90d339 Fault Module Name:StackHash_8d67 Fault Module Version:0.0.0.0 Fault Module Timestamp:00000000 Exception Code:c0000096 Exception Offset:0000000078e650ac OS Version:6.1.7601.2.1.0.256.48 Locale ID:1033 Additional Information 1:8d67 Additional Information 2:8d672743ada8a2e1e75c51ac7051c8c2 Additional Information 3:354b Additional Information 4:354bf194360e47150cf5d5ca4e71d674
I am using the latest version.My video card drivers are totally up to date.I am using a decent computer with 16 gig of ram.I am opening the program as an administrator.I have reset the prefrences too many times to count by deleting the prefrences and holding down ctrl+alt+shift at startup.
2- If by some wild stretch of the imagination I get the program to start with totally cleared prefrences and running as administrator then the program will crash about 75% of the time when using "Save As".If I try to do anything special like create a new folder to put the file into then the chances of a crash increase greatly.
3- If I try to open up a file from Lightroom, even if the files are opening every other way, Photoshop will crash very often.
What is going on here? I have made no changes to my computer, have not installed any new programs, and, as I stated earlier, have everything updated. I even stopped using plugins a long time ago because I did not want to take the chance that it was going to cause this fragile program to crash, so all plugins are uninstalled. Why does this keep happening? When this has happened before everything will work fine for months and then suddenly I cannot get the program to open. When it does open again, for seemingly as unknown a reason as when it stopped, it will work anywhere from a few minutes to another couple of months.
This seems to be a problem that tons of people have, but I have not been able to find any answer other than "Delete Settings" or "Run as Administrator" or "Update *****." What can I do to keep this from happening and to fix it when it happens?
View 2 Replies
View Related
Nov 1, 2011
I had the free trial of X5 and it expired. So, I paid for the download of X5 but I cannot find the icon in the drop down list? I may have deleted it at some point but there is nothing in the recycle bin.
I was able to use the capture tool..and I think i can show the list in question..but I am totally new to using capture. Ok..how do I include in this message anything that I "captured"?
View 1 Replies
View Related
Mar 5, 2012
Just installed CS5.1 a couple of weeks ago. Runs no problem in 64 bit. But 32 bit is a different story..In Mac, Get info, and set CS5 to open in 32 bit, CS5 launches an instantly freezes with the spinning beach ball.I can't do anything expect force quit.Mac Pro, 8 core, 10 GB ram, OS 10.5x
I need to be able to run in 32 bit for plug-ins that are not 64 bit.
View 3 Replies
View Related
Jul 24, 2013
I am running CS5.1 and suddenly Illustrator gets hung up on opening a particular file every time I launch. I do want to open this file, but since I just get the spinning rainbow every time I do - I'm guessing it's corrupt now - I've tried to work on other files. Any other file launches fine, but then it quickly tries to open this corrupt file too, hanging up the program until I force quit.
View 3 Replies
View Related
Jan 15, 2013
Why can't I find "Remove Chromatic Aberration" under Lens Correction?
View 2 Replies
View Related
Feb 27, 2009
This didn't used to happen, but now whenever I open an Illustrator file, the "Find Font" dialog opens as though the fonts I'm using aren't found. Not sure what it wants me to do because no matter what I try nothing resolves. I simply click the "Done" button and go about my business. And there are no problems. Why is this happening? and why now? My fonts are always loaded before I open the file, the file looks and handles just fine.
Mac OS 10.5.5
CS3 Illustrator 13.0.2
Suitcase Fusion 12.1.7
View 5 Replies
View Related
Oct 13, 2013
How do I reconnect a missing file when it doesn't show on the right hand side?
View 2 Replies
View Related
Sep 13, 2012
I used to be able to just open any image and my copyright info would be inserted into the file data. I guess it was a droplet, "when the file is opened or created then add file info from a xmp file". I still have the xmp file with all the data in but i am unsure how to implement it being automatically opened and added to the file when i create a new one? I thought i could handle it, i assume its a droplet of some sort.
View 5 Replies
View Related
Apr 21, 2013
When trying to open a raw file in PSE 5 I receive the following error message
“Could not complete your request because the file format module cannot parse the file”
I checked and my camera Nikon D3100 is listed as a supported camera.
View 1 Replies
View Related
Feb 15, 2013
I am unable to get this code to launch the File Save As Command. I Think I have the sytax correct, because if I Replace "AppFileSaveAsCmd" with a different command name (i.e. "AppFileNewCmd") it works as expected. I have tried this with "AppFileSaveCmd" and "AppFileSaveCopyAsCmd" and both have also failed. It seems any kind of save command wont work... I am trying to creat a rule that will fire on "New Document" iTrigger that will Force a user to save the newly created assembly document in preperation for further iLogic rules that depent on the assembly Filename and path. Maybe there I am not telling it What file to Save? I have pasted the code below..
Format:HTML Format Version:1.0 StartHTML: 165 EndHTML: 3048 StartFragment: 314 EndFragment: 3016 StartSelection: 314 EndSelection: 314
SyntaxEditor Code Snippet
[Code]....
View 8 Replies
View Related
Nov 9, 2011
I'm trying to update a part with different colors for various features. My color styles are not available in this file. I can export them from another file, then use the import function to bring it over, but there has to be a way to force this file to find the entire "default" color file.
View 6 Replies
View Related
Dec 6, 2012
I'm linking an excel file to an .ipt file with iLogic code determining if the Material type is a certian value it will find the correct material thickness. These file work great when working on them thru Vault but when I "Save As Template" and create this file where our other template files are located (not Vault) this fuction does not work. I have realized that I had to place the a copy of the excel file in the same file folder as the template ipt, but even this does not fix the issue.
I recieve this error:
Error in rule: Material, in document: Part6
'MWW Materials (Inventor).xlsx' could not be found. Check the spelling of the file name, and verify that the file location is correct.
If you are trying to open the file from your list of most recently used files, make sure that the file has not been renamed, moved, or deleted.
It seems completly countintutive that just saving the file as a template file would cause this not to work when all files that are required are located in the same file folder. Maybe I need a reference to the excel document within the iLogic code.
View 3 Replies
View Related
Oct 2, 2012
I want to open a file in a fold with hundreds files there, every time when I click the open file, the select file box only show the top 10 files there. How to set to see the previous file which I opened before.
View 4 Replies
View Related
Mar 18, 2013
when trying to reopen a file from the "recently used" file list? When I try to click on a file from the list it gives me a message stating "error opening file". I know this will happen if the file has been moved to another location, but the files are in the same place as when I originally opened them. None of the files in the list will open anymore. Is this a pathing issue?
View 9 Replies
View Related
Mar 19, 2013
A fellow co-worker accidentally checked the box that says "don't open this file" (or something like that) that appears when a language file is missing upon opening a file from a client. He then also "accidentally" clicked the "perform this action every time" so as the warning window wouldn't appear any more. As a consequence there are now files that we cannot open on that computer. I've searched through system variable lists and come up empty handed.....
View 1 Replies
View Related
Mar 18, 2013
On Windows 7, 64-bit, with all the stuff turned on to show me hidden files and system files and everything, Photoshop CS6 (13.0.1?), and Lightroom 4.3
I'm trying to follow the advice that everything I do in Photoshop should be backed up somewhere other than as part of Photoshop, I periodically move all the stuff in the Users/<me>/AppData/Roaming/Adobe... folders to a backup drive... And, by and large, I can find and figure out what stuff is.
But, I can't find my preferences file. Adobe says:
General settingsAdobe Photoshop CS6 Prefs.psp (32-bit version)
Adobe Photoshop X64 CS6 Prefs.psp (64-bit version)
Users/[user name]/AppData/Roaming/Adobe/Adobe Photoshop CS6/Adobe Photoshop CS6 Settings
I don't have ANYTHING called "Prefs.psp" in the Users stuff. As near as I can tell, I don't have anything called Prefs.psp ANYWHERE on the disk.. Do I get to pick where this file gets put? Could I have put it somewhere ELSE? Or, is it actually named something else?
View 3 Replies
View Related
Apr 9, 2013
It doesn't appear to be in the Adobe Photoshop Elements 11 folder or either of its two subfolters..
View 3 Replies
View Related
Dec 6, 2011
I noticed, that in X4 my file ( in which I'm working) is lost, if I open a new file from the organizer.
In older versions, I could have a lot of pictures on my screen and switch between them.
Is this a "bug" in X4, or is there a way to put this feature back like X2.
Hope the question is clear??
View 8 Replies
View Related
Jun 27, 2012
By Opening File into AutoCAD I can set the Custom Property(dwgname,dwgid,projectname) of the File. But I want to set value of these properties without opening AutoCAD application.
I can set it using:
public void SetAttributes(Hashtable hashTable,String fileOpenPath){
Document Doc = Autodesk.AutoCAD.ApplicationServices.Application.DocumentManager.Open(fileOpenPath);
Can we create this Object using any other way??
Database Db = Doc.Database;
DatabaseSummaryInfoBuilder DbSib = new DatabaseSummaryInfoBuilder();
Autodesk.AutoCAD.DatabaseServices.TransactionManager tm = Db.TransactionManager;
using (Transaction aTran = tm.StartTransaction())
[Code] .......
View 3 Replies
View Related
Sep 6, 2013
I Have transferred a CS6 Raw photo session from camera to hard disk. Now some files show all camera details and they are working fine but some files show only right photo number and proper file size and Photoshop can't recognize them. The file names are exactly same type. Is there any way to fix these hidden files?
View 7 Replies
View Related
Jun 13, 2004
I am trying to open an EPS file in photoshop. It was only around75k o the floppy but when I try to open it in photoshop it displays a window titled "Rasterize generic EPS format" It then shows the following details.
Width 7431 pixels
Height 12644 pixels
Resolution 72 pixles
Image size 268.8m
If I try to open the image at this time it takes forvever and eventually everything freezes. If I try to open the image at a lower width and height it opens really small then when I zoom in its all blurred.
View 6 Replies
View Related
Feb 23, 2009
this is a 10 year old eps file. we used it to make vinyl cutout stickers.
after opening in PS7, it's just black squares, without all the cutouts in each square.
when opened in notepad, these are the 1st 2 lines...
%!PS-Adobe-2.0 EPSF-2.0
%%Creator:ScanVec CASmate(TM) 1.20
View 5 Replies
View Related
Apr 14, 2005
I have a .DST file on a disc I am trying to open but my PC I think does not have any software to do this.
View 5 Replies
View Related
Jul 19, 2013
Every time I start up Photoshop CS6 (Cloud), an old file opens but it has a totally different name than the file itself does and is a .psb file. I cannot right click on it, I have tried searching for it in my computer to delete the file, it doesn't exist anywhere. How can I keep this strange file from opening upon start up and get rid of it once and for all?
View 4 Replies
View Related
Sep 20, 2013
I shoot raw/jpg. I viewed in Digital Photo professional and transferred a Tiff to photoshop. I saved the image on a seperate disc. when I opened and tried to save again I received an error saying I didn'thave permission. I finally saved the psd version by changing the name of the picture. when I went back to the raw file on my flash card it was gone. when I went back to the tiff file that was gone to. the only file I have left is the jpg back up and the psd version. All the other pictures are still on both the flash card and my backup drive except this one. I've done recovery searches and they recover everything i've deleted from the flash card except the file I need. I don't understand why this happend. I've tried searching for hidden files etc. I didn't delete this file. the recovery program shows that it is there it just won't get it. it gets everything else but not this one. both the raw and the tiff files disappeared from two different drives. I want to get the raw file back.
View 2 Replies
View Related
May 30, 2013
this morning photoshop decided to play up and any new images that i try to open to edit, i get this message. 'Could not complete your request because the file was not found'. The same problem occours with all file types except .psd files. I have tried uninstalling and reinstalling photoshop with no luck.
And incase its relavent, each time i click open the 'enable:' option is blank and 'Format:' is set to photoshop by default. With these settings all files in my finder and greyed out, so i change 'enable' to all readable documents which ungreys them. But when i open them, i get the message mentioned at the start.
View 6 Replies
View Related
Apr 9, 2009
We can not open most files. Tiff, PSD, some PDF files will give an "unable to find file error". Jpg files, and certain PDF files and TIFF files that use jpg compression work. I have tried resetting all the settings, changing scratch disks / memory usage, uninstalling all fonts, and reinstalling the application and the problem persists.Also i do not know if this is related but the same time we started having errors in photoshop we also have problems in Microsoft Word. The font list shows a lot of fonts as just a white box. Other apps can use the fonts fine. Just not in word.I have attatched a JPG file with screen caps of the errors.
View 2 Replies
View Related
