I'm having a problem with the embedded camera data that is stored with a photograph. I'm not sure but every once in a while PS deletes the data from a photograph when I edit the photograph.
This is not happening every time. Some photographs I edit all the data is still there after I edit. Others I edit have been changed. All the camera data is missing and the original creation date, the date the photograph was taken is changed to the date I edited the photograph.
The creation date and time is important to me to keep photographs from different cameras in the correct sequence of real time. Is this normal for PS or am I causing it?
I am relatively new to Lightroom. I have imported Panasonic Lumix DMC-FZ200 raw (.RW2) files into Lightroom 5.3. When I go into the Develop module under the Camera Calibration the only profile that shows up is Adobe Standard. My camera is supported according to the Adobe web site.
i have created a data band in profile view that should show a created profiles elevation, but some of the the data fields are missing irregulary. Also in the data band that shoud show the diferenece betven the tow profiles - EG and the new profile the data is missing. The EG profiles data and the surface are ok all is shown.
I've just installed Civil3D, 64-bit on windows 7(running on bootcamp) and am trying to insert a georeferenced raster image but have encountered some issues.
1. "Home tab>>Data panel>>>insert An Image" - The data panel is missing and it's also not found in "customize palettes"
2. Trying the data connect route does not work either: Display manager>>>Data>>>Connect To Data - There is no 'Data' option and I cannot connect to Data.
if there was some kind of shortcut to see the data info ( ex. shutter spedd, iso setting ) in photoshop cs2 other than going to file>file info> camera data 2.
Been having problems with CR for weeks tried uninstalling PS and re-installing as a last ditch solution. Now when I tried to access CR prefs I get a message saying Camera Raw is not installed.download link for CR.
Photoshop CS6 (from cloud) Windows 7 64 bit i7 6 core CPU 32 gb Ram
I have CS3 installed, my OS is Windows Vista 64. When I am using Bridge I cannot find Camera Raw. If I highlight an image and then right click on it, I cannot see the "open in Camera Raw" command, it's not greyed out just not there, also it is not in the File drop down menu. So, I cannot use Camera Raw! I have tried reinstalling CS3 but the problem is still there. I have installed all available updates, but no change. My partner also has CS3 on thier computer with Windows Vista and Camera Raw works fine.
I often produce product images for clients that they then supply to their distributors and I prefer that my camera EXIF data not be included (none of their business). I use various actions to produce a variety of sizes and colourspaces (sRGB and CMYK) from the original PSDs. Unfortunately Photoshop seems to lack the ability to strip the camera EXIF data from a PSD file other than by copying the image to a new document. This is fine for a few images. But when you have 50-100 images it's not very practical.
Here's an action that would work:
Note: Image layers are not supported and the colourspace is lost so you will need to make note of the colourspace of the originals.
Action 1 : Open (flatten) and save the RGB or CMYK PSD files as Scitex Format (SCT).
Action 2: Open .SCT files, assign the now missing colourspace tag, re-save as PSD.
I can then add any metatags that should be embedded in these images.
But does anyone know of a plugin or post-processing utility that will strip selective metadata (ie: camera info only, not the metatags with the company info, copyright etc..) from RGB and CMYK 'Photoshop format' images?
I have Photoshop 10.0 (Windows XP) and use it to edit my photos from my new Nikon D300 camera. I create and maintain my images in JPG format. My D300 includes 40 to 50 camera info/metadata elements including the camera and lens settings at the time the photo is taken.
When I do a simple "Save As" in Photoshop 10 to a new JPG file (whether image adjustments are done to the source image or not), the new JPG file is stripped of about half or more of the original metadata. Is there a Photoshop setting or plug-in that will force the software to preserve/retain the original metadata?
Using PS CS3, I wrote a few lines of text, then saved the file in three formats; PSD, JPEG and GIF. If I close PS and click on any one of these files to open it in Photoshop, I get the "No camera data found in this file" message. In fact, if I open just about any graphics file in any format by clicking on it, I get either this message or another one telling me which camera was used to shoot the image, complete with an exclamation mark at the end .
If I open PS first and then open a file, the message does not appear, even if it's a digital camera image. Is the any way to kill this damned thing and have it stay dead? FWIW, I've wiped out preferences several times and sometimes that results in a temporary cure. But a few days later the message is back again. FWIW#2, this problem does not occur in any other CS3 application. Any suggestions?
I have PS CC (PS only). Updated to ACR 8.1. I am not seeing Camera Raw 8.1 as a filter (drop-down from the main Filter menu) option, nor do I see the Radial filter (within ACR - no elipse icon), nor do I see the Upright from the main Filter menu within Lens Corrections.
I recently bought a new Dell XPS computer running Windows Vista that included Photoshop Elements 6.0. My pictures were on my old computer in Adobe Photoshop starter album edition 3.2. I tried directly moving files using windows explorer (Think hard drive not internet) to external hard drive then importing to new 6.0 version but pictures would require "reconnecting" upon disconnecting from external drive and never would reconnect after disconnecting. I then tried the "Burn to CD" option in starter edition 3.2. This way transferred data successfully without requiring "reconnecting" but did not transfer catalog data.In addition, there is no "move" option in 3.2 and the 6.0 version will not load on my old computer for some reason. How do I go about transferring both the picture data (~3gig) along with the catalog data (tags & key words)?
I have dowloaded the Trial version of Photoshop CC in Spanish and everything is fine with one exception: the camera shake filter option does not appear on the list of options.
I have Photoshop CS6 extended. When I look for the camera shake tool on the drop down sharpen menu, it's not there. I have tried reinstalling but no change.
This morning camera raw vanished from CC Bridge and Photoshop. I also downloaded Maverick. Don't cc and maverick work together ? How can I get ACR back?
I use PSE 10 with Camera Raw 6.6. It appears to be missing functions such as the paint brush and the ability to mask. I've tried downloading it again, but the additional functions did not reappear.
I purchased PSE 11 and do not have the plug-in Camera Raw. I have tried the solutions suggested in the main Adobe support page without success. A friend bought a copy at the same time and she has the plug-in. I have even followed to upgrade to 7.3 but it has still not appeared in my Help>Plug-ins dropdown, nor is it in the Open As file type dropdown?
I have a Panasonic GH3 camera. I would like to add an item that is in the EXIF data of the RAW and DNG file to the EXIF fields kept by LR5. I can see all the camera EXIF data by using the GREAT 'exiftool.exe' created by Phil Harvey.
[URL] ......
Just to start, I would like to add the item "Focus Mode" that is in the "Panasonic" section of the EXIF file of the RAW and DNG files. The Focus Mode field has values such as:
Example 1:
---- Panasonic ---- Image Quality : Raw Firmware Version : 0.1.2.0 White Balance : Auto Focus Mode : Manual AF Area Mode : 1-area Image Stabilization : Off Macro Mode : Off Shooting Mode : Aperture Priority
or, as anoher example:
Example 2:
---- Panasonic ---- Image Quality : Raw Firmware Version : 0.1.2.0 White Balance : Auto Focus Mode : AF-S AF Area Mode : 1-area Image Stabilization : Off Macro Mode : Off Shooting Mode : Aperture Priority
I find this data in both the Panasonic Raw files, and the DNG files created by LR5 (and I was very relieved to find that the Focus Mode is carried forward to the DNG files, since I don't keep my old Panasonic RW2 Raw files after they are converted to DNG!).
So, since this camera manufacturer data *is* in the DNG, LR5 *is* reading it.
Thus my question: How can I tell LR5 to inclued the "FOCUS MODE" value in the EXIF data it creates with each photo?
Is it possible to read raw image data into Gimp? By raw, I mean image data without a header or compression, i.e., RGB, 16-bit unsigned, or 32-bit floating point grayscale, etc.
I see "Raw image data" under "Open > Select File Type", but grayscale isn't listed. Is the only option? Are there any add-ons for grayscale?
I have my laptop with LR4, I'm using an external HDD to store the RAW data from my camera. This HDD is fed by an external power line so it's not as portable (WD My Book3.5")
So the setup is that LR4 is linked to the external HDD. Whenever I download photos from my CF card, I tell LR4 to copy the images to the external HDD because I don't want my laptop to be filled with RAW. I only export the JPG's to my laptop.
Now here is the tricky part. When I travel, I take my laptop and my lighter external HDD (WD My passport 2.5") because it's portable and needs only USB power.
While traveling I import my photos using LR4 to the secondary HDD (my passport) and I edit them. When I get back home, I would like to "merge" my edited images from the portable HDD (my passport) to the primary HDD (my book).
So essentially I would like to streamline my work as if I'm managing one catalogue on two separate HDD.
I spent the better part of the day animating a Camera (using the CSTools DocuCam setup) in Cinema. It's excatly how I want it. The camera rig is parented to a null which is simply changing its position around the scene. I'm also keyframing a target null that the DocuCam is following. The DocuCam has several xpressions that cause it to "wiggle" and quickly zoom in and out to give a handheld feel.
First attempt, I brought in the C4d (r14) file into AECC and hit Extract Camera data. Solo'd out just the DocuCam (the currently selected camera in the C4D source file), and added a Solid to the Comp. Scrubbed through the timeline to see if it moved away from the Camera as expected, and it is totally misaligned. The camera doesn't rotate or perform any of the same movement as it did in C4d.
I also tried baking all the keyframes for each of the elements in the c4d file, and re-import. Not any better. All the frames for the camera do import (without the nulls, etc), but again, it looks like I'd have to muck around with some nulls in AE to (maybe) get everything to align.
It will be annoying to have to CameraTrack my 3D rendered scene, when I have all that data in C4D.
Other attempts included:
Trying to use an .aec file and that only imported 1 keyframe for the camera, despite the baking method.
Repeat same procedure, this time with External Compositing Tags attached to the camera and assoc layers. Even attached it to a dummy object (Cube) in front of the camera and tag'd it.
I have a live shot that I have 3D Camera Tracked using the built in AE plugin. I select 'Create new Camera and Solid'. AE creates a new 3d tracked camera and a solid. I save my comp. I go to 'File-Export-Maxon C4D', and create a new .c4d file. I import that file to AE, and put it in my comp. I go to 'Edit--Edit Original...'. C4D Lite opens up. I can see a new null, with a plane and camera inside. Everything looks great, but the camera has no animation on it. Upon closer inspection, I realize that none of the keyframes from my AE camera have been exported to my C4D camera.
I've tried exporting a new camera to C4D in as many ways as I can think of. The other strange thing was that the 'Merge Camera' button in the Cineware plugin in AE is grayed out, no matter how many new cameras I make. I've even made my own cameras and animated them without using the 3d Tracker plugin and it never exports correctly. I've also tried reinstalling C4D Lite.
We have created a number of project parameters (all ifc parameters)
Site Name Building Floor Space Number Space Type
And Mark Test, Yes another test, As identity data.
We can schedule out all the information with no issues, however when we export to ifc we can only find the “Test” information. Are we missing a setting in the export or have we create the project parameter up incorrectly.
Just installed LR5. After importing RAWs from my 6D with attached GPS data I have to realize that they are missing in LR. The import is straigth and standard without any exclusions. Geo setter and other viewers prove that GPS data are transferred with the pictures but in LR EXIFS are quite "naked". No private zone ist marked in the chart module which might play a role in export functions only..OS is Win7 64, all up to date.
I shoot RAW with a Canon 5D Mark II. I am using Lightroom 3. All of the sudden I can't find my camera profile settings in the Develop Module under the Camera Calibration Panel. They used to be there and now they are gone. "2010" is selected under the Process bar, but only Matrix shows up as my available Camera Profiles. What did I do to make them disappear? I can't think of anything that I could have done. Haven't done much except edit photos and now my profiles are missing! How can I get my camera profiles back?
I have this message when I start Lightroom 3 (roughly translated from french) "Missing camera profiles : some of your camera profiles are missing, that may alter the rendering of your raw files. Reinstall lightroom to restore them."
I did try to reinstall LR3 but without success. I'm with Lightroom from v1 an did upgrade to v2 then v3. I remember that I did remove a folder in the lightroom folder that I thought to be related to LR2 after upgrading to LR3. That's probably when the problem starts to occurs.
what are these missing files and how should proceed to restore them ? Where they installed by an older version ? I'm shooting with a D80 DSLR.
Since upgrading to Autocad LT 2012 I have had difficultly printing from autocad to my plotter. Drawings plot with information missing - in model space and paper space. The lines/polylines are not on hidden layers and all show fine in the plot preview. The parts which are missing/do not print are not consistent either - parts of polylines/objects which makes me think it isnt to do with my line type either.
