How much take cs6 and cs5 in cold load time under w7 32bit? i'm not talking about solid disk because they are amazing fast. i used process hacker ,portable version , and it's 9 seconds.
look more slow then cs5 or cs4.
my new installed CC sometimes starts in 64bit and sometimes in 32bit version (according to system info) It works fine but my pluggins dont work at both versions. so sometimes they are availeble, somtimes not. And thats not oke! I use win7-64bit.
View 2 Replies View RelatedAfter doing everything i can find to optimize my hardware/software for doing 3D animation in Ps Ext CS6. I still cannot render an animation to video using the Ray Traced Final setting. (Ray Traced Draft, no problem.) The last time I tried (after repairing disk permissions), at least Ps did not crash and give me the same old crash report (Exception Type: EXC_BAD_ACCESS (SIGSEGV) Exception Codes: KERN_INVALID_ADDRESS at 0x00000007a0020000). This time I just got an error msg that my request could not be completed. (Progress?) Checking Activity Monitor, I could see that my available RAM, which was 13 GB when I started the render was now less than 1 GB (761 MB).
So, I have come to the conclusion that my 16 GB of RAM and 300 GB available for virtual memory on my HD is not enough for rendering the type of 3D animation I am trying to do. Would you agree? Also, I have read it is not good to use the same HD your program is installed on for a scratch disk, so I am considering getting an external solid state drive to use as a scratch disk.
There is no crash report. With Bridge CS5 everything works fine. (Opening RAWs with minibridge CS6 works file too.)
View 5 Replies View RelatedTonight I created my first DVD disk (ie authored a DVD) using X4 which I purchased last year.It seemed to take a much longer time to complete especially the creation of the title (menu?) than what I am used to using VS10.
Is this normal?
Is this a known 'problem' with X4?
What are others using to author a DVD?
Should I use VS10 to 'create disk'?
BTW I authored using the same characteristics as I used when I created my DVD file (create video file) so I don't think that it re-rendered.Also I am creating a 'standard definition' DVD not high def.
Brushes keep un installing. CS6, Windows7. Is there away to load more then one brush at a time?
View 2 Replies View RelatedI have CS6 64bit on a reasonably up to date windows 7 system. Just checked for CS6 upgrades 7/14/13, and have the latest version (13.0.1.2).
Things have been working fine since I installed the product about a month ago.
At some point something went wrong and it now takes 30 seconds or more to load a file via "file>open..."
It also takes 30 or more second just for photomerge to display the file dialog from "file>automate>photomerge..."
All other photo s/w I have loads raw files, tifs, jpegs, etc... very quickly. This is CS6 specific.
I disabled loading of plugins, didn't work (CS6 starts quickly enough, just not so much file loading).
trying to load multiple actions. can only do one at a time. its going so slow.
View 2 Replies View RelatedEVERY time I try to load Photoshop Elements 10 Organiser it crashes "Elements 10 Organizer has stopped working". It is unusable. Is there a patch or something I can load? I will contact Adobe but I'm out of hours at the moment. In the meantime hunting on forums and internet has revealed to me others who have had this problem but no solution. I am using Windows 8 with 8GB RAM on an Intel i7 processor.
View 6 Replies View RelatedI'm using windows XP with Photoshop CS.
Whenever the network cable is connected to the computer, Photoshop start-up load time is significantly longer than when I pull the network cable out.
As I flip through pics in the Library Module, the previews often take a while to load. Any way of speeding this process up? I've already tried changing the Catalog Settings, ensured the pixels meet my screen resolution, and chose low quality preview.
View 11 Replies View RelatedI have had CorelDRAW X6 for about 6-months with no problems. Recently I try to open X6 and the load time is extremly long. Once it finally loads the screen looks normal but when I click on anything on the screen i just get a "ding" sound and the screen is frozen. I actually have to go to task manager to shut it off.
Once in a while I can open a previous design and then everything will work fine. I thought I would try to re-install the software. I tried to uninstall but when I get to the uninstall page I see three options "Modify", "Repair", or "Remove". I can click on these but there is not other botton on the page like and OK or Continue, so I am stuck.
This software is very important to my t-shirt design business. how to either get it to load normally and act normal or at least be able to uninstall and re-install?
I put the elements 12 disk in my DVD drive and it spens about 4 minutes trying to get going. The lights on the drive flash occasionally, and you can hear it trying to go. I go to "my computer" to check the "drive" folder and it never appears for me to click on it and open it. It also doesn't automatically load which I have turned on. I have verified it is a DVD drive.
View 2 Replies View RelatedIs there a way to have my custom settings load when exporting a .jpg every time, without having to use the dropdown and select mine every single export?
View 2 Replies View RelatedWhen i start corel it takes really long time to create new document. Or when i save document it also takes a lot of time. I resest workspace, clear temp directory, what else could i do?? This all started without any reason. I shout down pc, and now i turned it on, and since then corel is not working ok...
View 13 Replies View Relatedeach time I force quit Smoke with the service monitor in a project when I open the same project after it takes several time to load the clips (EDITDESK: LOADING CLIPS). Sometimes the project just didn't open and stay on the EDITDESK: LOADING CLIPS screen.
There's something I'm doing wrong or my project is totally corrupt ?
smoke201321_smack02_app.txt smoke201321_smack02_shell.txt
I'm creating a template part to line the inside of a wall with wall boards. All the boards are drawn as an array of seperate solid bodies which are to be made into components once the windows and appertures have been extruded out.
The problem is when the wall changes to a shorter length and then back again. the solids are re-created and the extrusion e.g. Window1 does not have the new solids in it's effected solids list, so I get an error.
Is there a way to set the extrusions "effected solids" (Not sure if that's the correct term) to all the solids all the time through iLogic or the API?
Windows 7, had everything working fine. Added SSD and installed system from scratch on SSD. Old drive is now my second drive.
Trying to put the scratch disk on the second (old) drive to reduce wear on the SSD. But every time I do, I get the disk error message and it erases all my settings (so annoying!)
I figure it's a permissions thing since I've had to deal with that already to some degree, but I don't know how to fix it since I don't know where adobe is trying to save the scratch file.
When the 'up' arrow appears in a thumbnail and comes up with the message:
The metadata for one or more of these photos has been changed by another application. Should Lightroom import settings from disk or overwrite disk settings with those from the catalog?
What exactly does that mean? This seems to happen every time I export an image to PS (CS5) and return to LR. What exactly has changed? What settings are being imported if I choose 'import settings from disk'.
I am having all sorts of trouble with my setup - 32bit windows 7 and 32bit CS6. I have a 2TB hard disk (with 1.7 unused) and 8GB Ram installed.
I understand that this setup has a maximum amount of 1.7GB ram available to CS6 and this may possibly be the problem. (see the attachment)
My D800 NEF images are around 40MB each. I get out of ram messages in Photoshop and the same in Bridge. In Bridge the 100% lupe takes forever to activate and eventually after several images it says the 100% lupe is unavailable. If I purge the cache it is OK again for just a few images. There appears to be no problem with smaller files, jpegs etc.
I will change the setup to 64bit CS6 on Win7 64bit if this is the only way to rectify the problem.
Now that I have CS4 running on XP I'm trying to do some real work with it. First thing I do is disable tabbed windows and other new features as they have yet to prove themselves useful in my workflow. Perhaps I'll grow to appreciate them. But for now I'm just trying to get the app to work with the good ol' floating windows.
1) Can I stop new images opening with a Window that's glued to the top left corner of my screen? Past versions of PS just opened a floating Window. CS4 obliges me to 'unstick' the Window from the top left corner every time I open a new image. I've scoured the preferences but have yet to find any way to turn off this feature.
2) When grabbing the top bar of an open image window to move it on my screen I find it to be sluggish. With previous versions of PS one would grab the top of the image window and move it quickly on your screen to wherever you want. The response was pretty will instantaneous. With CS4 there seems to be a very slight lag whereby the move is occurring slightly behind the cursor moving it. It's not a huge lag. Just enough to get the sense that there's something amiss. I'll try it in Vista64 to see if the same thing is occurring there.
Is it possible to use a load statement in a profile to automatically load/unload a cuix?
View 7 Replies View Relatedbefore the latest updates to photoshop CC one could export from LR a series od Raw images to HDR Pro, create a 32bit file, save and editin LR or CR.
Now, when creating the 32bit file photshops promts a button for edting in Camera Raw instead of the usual "create file" (then to be saved and opened in LR). Which is ok, but if I edit the file in CR and then open it as a Tiff in LR the adjustments done in CR are not visible in the sliders, but not only, the images is of bad quality in LR.
Several of the filters I use regularly don't have 64 bit versions.
View 13 Replies View RelatedI just downloaded photoshop CS6 and I went to import video frames to layers but it says I need to use the 32 bit version. I had the same thing happen to me when I had CS5 so I looked up how to switch it and found out that I just had to right click on the photoshop app, click "Get Info", tick a box that says "32bit" and reopen the app. Well, I tried that with Photoshop CS6 but there is no option for 32 bit and now I don't know what to do.
View 1 Replies View RelatedJust want to know if this normal. The Opencl option can be checked in the 64 bit version of Photoshop but not the 32 bit. Just updated the drivers for the Intel HD 4000 graphics from the Intel website and Opencl is still not an option. HD 4000 supports OpenGL 4.0 and Opencl 1.1
So is it something I can fix or should I contact Intel about it?Here is the basic OS/video info:
Adobe Photoshop Version: 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00) x32
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:10, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
[code]...
I am trying to install Photoshop CS6 on my Windows 8 64-bit PC. While in the loader option I chose both 64 and 32 bit installations, I only get 64-bit to install and work properly, and the Program Files (x86) protoshop cs6 folder stays empty.
I tried to reinstall 32-bit alone, uninstall and full reinstall, I also checked for security permissions in Program files (x86)/Adobe and in Common files which seem OK, Administrators, Creator Owner and System have the desired Full control permissions and finally I apllied the latest adobe_creative_suite_cleaner_tool fix on all products and tried reinstall, to no avail.
The error I always get upon finishing installation is the below:
Exit Code: 6 see specific errors and warnings below for troubleshooting. For example, ERROR: DF024, DW063 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 14 error(s), 0 warning(s)
----------- Payload: {83463106-DD1C-4FE5-A61C-DF6715472AD4} Adobe Extension Manager CS6 6.0.0.0 -----------
ERROR: DF024: Unable to move file at "C:Program Files (x86)Common FilesAdobeInstallersadobeTemp{83463106-DD1C-4FE5-A61C-DF6715472AD 4}\_90_f004805aa933f587236382b1bac3bac1" to "C:Program Files (x86)Common FilesAdobeHelpCfgen_USExtensionManager.helpcfg" Error 5 Access is denied.(Seq 117)
ERROR: DW063: Command ARKMoveFileCommand failed.(Seq 117)
[code]....
Just wondering if the CS6 will work on a 32 bit Windows 7 platform?
View 2 Replies View RelatedHow do I change to 32 bit mode in CC using mac OS 10.8.5? The "get info" pane no longer has the 32 bit mode option.
View 1 Replies View Related32 times and 16 reboots later Photoshop 32 bit keeps freezing and not responding on a 2 gig 5 layers PSD file.
Its not the OS, its not the file format of the drive, its not the machine, as it worked last week on CS6 Works on a 64 bit machine no problem.
I've only seen one thread that releates to this issue with no answer resolution. I have a reoccuring but where my layer comps display with elements moved into different positions from when I last saved the comp (all layer comps are set to save Visibility, Appaearance and Position).
This seems to always happen when I re-open a document, and frankly I'm getting sick of going back and fixing photoshop documents after I save all my comps to files. I can't imagine that this isn't a known issue or that others are not seeing the same thing.