Photoshop :: CC 32bit 2 Gig File Freezing?
Jun 19, 2013
32 times and 16 reboots later Photoshop 32 bit keeps freezing and not responding on a 2 gig 5 layers PSD file.
Its not the OS, its not the file format of the drive, its not the machine, as it worked last week on CS6 Works on a 64 bit machine no problem.
View 6 Replies
ADVERTISEMENT
May 8, 2012
There is no crash report. With Bridge CS5 everything works fine. (Opening RAWs with minibridge CS6 works file too.)
View 5 Replies
View Related
Dec 3, 2012
I didn't know what to expect but when performance went from bad to worse and each click on LR resulted in (not responding), I became very concerned. I did research and couldn't find anything so I looked at my swap file and tweaked it. I added swap files to all of my drives, physical and virtual. For now that seems to be working.
My 32 bit W7 has 4gig of RAM installed.
View 1 Replies
View Related
Apr 22, 2012
This happens repeatedly as I open the program and attempt to open a file. The "open file" dialog box flashes for a split second then disappears and the Photoshop program freezes up.
View 3 Replies
View Related
Dec 4, 2011
In VSX4, a particular VSP file is freezing but other VSP’s can be edited without problem.
It freezes during playback of the project, and individual scenes - audio and video. I have deleted individual clips - but it freezes at a different clip or at a different place entirely. I can play the first 17 minutes or so, but then it freezes. If I restart the program and play at any point after the 17 minute mark it freezes, sometimes immediately other times after a few munutes. Even scrolling after the 17 minute mark sometimes triggers it.
The message is: “Corel VS Pro has stopped working”. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.
To try and resolve this I have:
Uninstalled and reinstalled VSX4 Pro
Updated to SP2
Updated QT and Direct X
System Restore
Full system scan
Project Details:
From camcorder using EasyCap
PAL (25 fps)
MPEG files
24 bits, 720 x 576, 25 fps
Upper Field First
(DVD-PAL), 4:3
Video data rate: Variable (Max. 8000 kbps)
LPCM Audio, 48000 Hz, Stereo
View 8 Replies
View Related
Aug 15, 2011
I've recently encountered an error using Max 2010 Design where, a file that I've been working on or have worked on in the past suddenly ceases to open while using Max 64 bit. The file will continue to be openable in Max 32bit, but opening it in 64bit causes instant crashing. I've tried installing the service pack, installing new video card drivers - neither of which fixed the problem.
I really don't know where to look for answers at this point, and do not have free reign of my work machine to request a reinstall / reimaging of my hard drive. I need a solution that I can bring to the IT department that fixes the issue as simply and quickly as possible.
View 2 Replies
View Related
Mar 26, 2010
When I try to import a file it freezes up. It doesn't even give me an option to select type of file. It pulls up the screen where you would be able to but freezes and will not let me do anything. I use Windows XP.
View 3 Replies
View Related
Sep 6, 2011
I am having issues with my computer completely freezing while performing a File, Open process. I'm in drawing 1, I save it, then go to open drawing 2. Drawing 1 will save, the open file window pops up. With me so far? While navigating through the file directory tree, my computer freezes. I do not chose a file that freezes during opening. It is during the process of getting to the folder drawing 2 resides in, and then it freezes. This happens to me multiple times a day. Ctrl +Alt+Delete will not work. I have tried letting my computer sit, as you would with a program not responding, and it doesn't unfreeze. The only option I am left with is a hard reboot. The only other program I have running is my MS Outlook.
I have been back and forth with our IT person, and because he can't replicate the problem (after trying one file open), he can't figure it out, or doesn't want to.
I am running AutoCad 2012 with a Dell Precision T3500, 2.13ghz, intell xenon E5506 processor, and 4gb of RAM. After looking at the system requirements, and reading that 2012 needs a 3.0 or higher processor, could this be the route of my issue?
View 8 Replies
View Related
Feb 21, 2013
-Inventor 2013 SP1.1 (Issue)
-Inventor 2011 SP2 (No Issue)
Templates have been coverted up from 2011, keeping copies of the old templates in separate folders all under the same parent directory.Have 2013 mapped to the folder with updated templates located on a network drive. Total of 18 temolates including the standard templates.
Computer specs:
Win 7 Pro 64bit Service Pack 1
Intel Core 2 Quad Q6700 @ 2.66GHz
8GB Ram
NVIDIA Quadro 2000
The Issue:I start Inventor 2013 or open an .ipt/.iam ect. I now want to create a new file so I click the "New" Icon.Inventor freezes for 10-15seconds and finally shows the templates.After that if you click on any of the templates it freezes instantly. Or if you scroll the browser bar down to navigate the folder. 15-35 seconds
After selecting the correct template it freezes for about 15 seconds.For those keeping track Thats 40-65 seconds just to open a drawing...
For Inventor 2011.Click, Click, Click. Open...Takes maybe 5 seconds.
View 5 Replies
View Related
Sep 22, 2012
I am having all sorts of trouble with my setup - 32bit windows 7 and 32bit CS6. I have a 2TB hard disk (with 1.7 unused) and 8GB Ram installed.
I understand that this setup has a maximum amount of 1.7GB ram available to CS6 and this may possibly be the problem. (see the attachment)
My D800 NEF images are around 40MB each. I get out of ram messages in Photoshop and the same in Bridge. In Bridge the 100% lupe takes forever to activate and eventually after several images it says the 100% lupe is unavailable. If I purge the cache it is OK again for just a few images. There appears to be no problem with smaller files, jpegs etc.
I will change the setup to 64bit CS6 on Win7 64bit if this is the only way to rectify the problem.
View 27 Replies
View Related
Oct 19, 2008
Now that I have CS4 running on XP I'm trying to do some real work with it. First thing I do is disable tabbed windows and other new features as they have yet to prove themselves useful in my workflow. Perhaps I'll grow to appreciate them. But for now I'm just trying to get the app to work with the good ol' floating windows.
1) Can I stop new images opening with a Window that's glued to the top left corner of my screen? Past versions of PS just opened a floating Window. CS4 obliges me to 'unstick' the Window from the top left corner every time I open a new image. I've scoured the preferences but have yet to find any way to turn off this feature.
2) When grabbing the top bar of an open image window to move it on my screen I find it to be sluggish. With previous versions of PS one would grab the top of the image window and move it quickly on your screen to wherever you want. The response was pretty will instantaneous. With CS4 there seems to be a very slight lag whereby the move is occurring slightly behind the cursor moving it. It's not a huge lag. Just enough to get the sense that there's something amiss. I'll try it in Vista64 to see if the same thing is occurring there.
View 7 Replies
View Related
Sep 17, 2013
before the latest updates to photoshop CC one could export from LR a series od Raw images to HDR Pro, create a 32bit file, save and editin LR or CR.
Now, when creating the 32bit file photshops promts a button for edting in Camera Raw instead of the usual "create file" (then to be saved and opened in LR). Which is ok, but if I edit the file in CR and then open it as a Tiff in LR the adjustments done in CR are not visible in the sliders, but not only, the images is of bad quality in LR.
View 1 Replies
View Related
Mar 27, 2012
Several of the filters I use regularly don't have 64 bit versions.
View 13 Replies
View Related
Jul 1, 2012
I just downloaded photoshop CS6 and I went to import video frames to layers but it says I need to use the 32 bit version. I had the same thing happen to me when I had CS5 so I looked up how to switch it and found out that I just had to right click on the photoshop app, click "Get Info", tick a box that says "32bit" and reopen the app. Well, I tried that with Photoshop CS6 but there is no option for 32 bit and now I don't know what to do.
View 1 Replies
View Related
Nov 2, 2012
Just want to know if this normal. The Opencl option can be checked in the 64 bit version of Photoshop but not the 32 bit. Just updated the drivers for the Intel HD 4000 graphics from the Intel website and Opencl is still not an option. HD 4000 supports OpenGL 4.0 and Opencl 1.1
So is it something I can fix or should I contact Intel about it?Here is the basic OS/video info:
Adobe Photoshop Version: 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00) x32
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:10, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
[code]...
View 2 Replies
View Related
Mar 5, 2013
I am trying to install Photoshop CS6 on my Windows 8 64-bit PC. While in the loader option I chose both 64 and 32 bit installations, I only get 64-bit to install and work properly, and the Program Files (x86) protoshop cs6 folder stays empty.
I tried to reinstall 32-bit alone, uninstall and full reinstall, I also checked for security permissions in Program files (x86)/Adobe and in Common files which seem OK, Administrators, Creator Owner and System have the desired Full control permissions and finally I apllied the latest adobe_creative_suite_cleaner_tool fix on all products and tried reinstall, to no avail.
The error I always get upon finishing installation is the below:
Exit Code: 6 see specific errors and warnings below for troubleshooting. For example, ERROR: DF024, DW063 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 14 error(s), 0 warning(s)
----------- Payload: {83463106-DD1C-4FE5-A61C-DF6715472AD4} Adobe Extension Manager CS6 6.0.0.0 -----------
ERROR: DF024: Unable to move file at "C:Program Files (x86)Common FilesAdobeInstallersadobeTemp{83463106-DD1C-4FE5-A61C-DF6715472AD 4}\_90_f004805aa933f587236382b1bac3bac1" to "C:Program Files (x86)Common FilesAdobeHelpCfgen_USExtensionManager.helpcfg" Error 5 Access is denied.(Seq 117)
ERROR: DW063: Command ARKMoveFileCommand failed.(Seq 117)
[code]....
View 2 Replies
View Related
Oct 31, 2013
Just wondering if the CS6 will work on a 32 bit Windows 7 platform?
View 2 Replies
View Related
Nov 29, 2013
How do I change to 32 bit mode in CC using mac OS 10.8.5? The "get info" pane no longer has the 32 bit mode option.
View 1 Replies
View Related
Mar 6, 2013
I've only seen one thread that releates to this issue with no answer resolution. I have a reoccuring but where my layer comps display with elements moved into different positions from when I last saved the comp (all layer comps are set to save Visibility, Appaearance and Position).
This seems to always happen when I re-open a document, and frankly I'm getting sick of going back and fixing photoshop documents after I save all my comps to files. I can't imagine that this isn't a known issue or that others are not seeing the same thing.
View 3 Replies
View Related
Sep 5, 2013
setting compatibility to XP SP2 and running as Administrator gets one nowhere
View 1 Replies
View Related
Apr 26, 2012
we should be able to switch using teh Get Info and activate the 32 bit switch. It looks like it works, but every time PS starts up it starts in 64 bit. This is happening on both a SL and Lion version of OS.
View 3 Replies
View Related
Jul 17, 2012
I just installed the trial version of PSCS6 using win xp pro sp3 32 bit. Plug-ins I added to the plug-in folder don't show up in the filter menu after re-start.
View 19 Replies
View Related
Jun 24, 2012
When I installed the downloaded Photoshop CS6 software, the application offered to install BOTH 64bit AND 32bit versions. Never seen that before, usually software looks at system and installs the correct version (or you choose before downloading).
I have Windows 7 64bit system. Is there a reason to install BOTH? Is there a problem to have both installed?
View 4 Replies
View Related
Dec 8, 2008
I have discovered many plug-ins do not work with the 64bit version of CS4. These programs will work with a 32 bit version of CS4 on a 64 bit system.
Where do I get this 32 bit version? Do I need to dowload it or was it downloaded along side the 64 bit version when I purchased the upgrade (I purchased the download version). Should it already be in a folder somewhere and if so where?
View 4 Replies
View Related
Sep 14, 2008
I have huge files that are painfully slow to work with -ie 15,000 by 10,000 pixels, 1 - 1.5GB in size. I have the 32bit version of Vista, 4gb ram.
If I upgraded to 8gb ram, would it really be worth it? I know the faq says that PS can somehow utilize this extra ram, but would PS be "as snappy" as when it has enough ram in the first place? If actions that take 15 minutes with these files would only take as long as the ones with my 600MB files, then I would do probably it. Do u think this would this be a major performance upgrade or just a tiny one?
View 8 Replies
View Related
Jun 18, 2013
Do I need to convert the original hi-res image file somehow to be able to save for web?
View 5 Replies
View Related
Jul 4, 2012
What are the advantages / disadvantages of using PS / CS5 in 64bit over 32bit ?
View 4 Replies
View Related
Jun 14, 2013
when opening an image into photoshop cs5 from bridge, how do I set the default from 32 bit to 64 bit
View 1 Replies
View Related
Feb 28, 2012
I ran MacKeeper the onter day and it actually fixed all my woes, however, when I went to open Photoshop, it only opens in 64bit mode. Could be a coinsidence.I quadroople checked that it is selected to open in 32bit mode in the "Get info" window and rebooted many times, but I can't get Photoshop to open in 32bit mode.I was hoping that there is something I am missing before I have to reinstall.
View 7 Replies
View Related
Nov 25, 2013
my new installed CC sometimes starts in 64bit and sometimes in 32bit version (according to system info) It works fine but my pluggins dont work at both versions. so sometimes they are availeble, somtimes not. And thats not oke! I use win7-64bit.
View 2 Replies
View Related
Jan 19, 2013
Photoshop itself is and always has been very robust, but Bridge gets persnickety sometimes, reporting low memory or just hanging, and when it hangs it really hangs... Today it was not responding and so I went into Task Manager (Win 7 Pro 64 bit) to end the process. I noticed that is is listed as a 32 bit program (Photoshop.exe is not). Is this normal?
View 3 Replies
View Related