Photoshop :: CS5 Levels Slow (sometime Not Very Responsive) With OpenGL On?
Mar 30, 2012
i found an odd behavior 10 or 15 adjustament layer ,the levels adjustament layer become slow or to be more specific not very responsive , with opengl turn on i have to be honest it's about only the levels with opengl Off the levels adjustament is always perfect
Â
i did notice with openglon this icon , i added a screenshot with a red arrowwell if i click on the icon , it takes 2 seconds and the levels become very fast with opengl on is normal? is there a way to let cs5 to re-calculate the histogram everytime i add a levels adjustament layer? why does it happen with opengl?
View 2 Replies
ADVERTISEMENT
May 7, 2012
I have run CS3 for many years on many platforms with two different printers. I upgraded my computer and operating system (basic specs listed below) in January of this year, 2012, and I decided to pare down to one printer: my Epson Stylus Photo R2880, which has been working with it splendidly until this past Friday, 5/4/12. I suddenly started getting the not responding issue when I attempted to open files in not just Photoshop, but my Acrobat as well. I have not updated any drivers in the month of May and I could still use all of my non-adobe software just fine. I looked online and found that it was a known issue. I reset my preferences, I ran a windows de fragment, I swept for spyware, and none of those worked. I set adobe pdf as the default printer for my computer and the "issue was resolved."
The problem remains that when I go into my print dialogue and manually change the target printer to my Epson I cannot print out of any of my Adobe software the not responding issue reasserts itself if any adobe software attempts to communicate with my printer: word, text files, windows viewer and the internet still print just fine off of the Epson. This is a huge problem for me because I run a small home publishing company and I can no longer PRINT out of my work software. Extremely frustrated that this 'fix' is no fix at all for my needs. I am at an utter loss for what to do to have a working office again and would like getting software that has been working perfectly in multiple set ups with multiple printers for since 2009 to work again?
Â
I used to run CS3 on a custom built XP SP3 system with an hp printer, then with and hp and Epson printer. This year I switched to my current system, wiping the old drive as a backup disk and adding a 1T hard drive to hold win 7. It has worked fine for several months of heavy use for my website, greeting cards, and small comic publications. I need this set up to work again or I will go out of business,
Windows 7 Professional service pack 1
Intel Core 1.7-2600K CPU @ 3.4Ghz/3/7Ghz
16 GB memory
64 bit
Pen Input Activated (wacom intuos 3)
"Windows Experience Index" rating claims it's '5.9' - whatever that means
Nvidia GeForce GTx560 graphics card
Basic mother board sound handling
Â
Logitech wireless keyboard and mouse
Epson printer
Mustek A3 scanner
View 5 Replies
View Related
May 2, 2013
PS6 was working fine before I noticed it, it no longer open whenever I trigger the .exe. It just won't run.
Â
Error desc:
Â
Faulting application name: Photoshop.exe, version: 13.0.0.0, time stamp: 0x4f61beba
Faulting module name: KERNELBASE.dll, version: 6.1.7601.17514, time stamp: 0x4ce7b8f0
Exception code: 0xc06d007e
Fault offset: 0x0000b760
Faulting process id: 0x69c4
Faulting application start time: 0x01ce46f6ae8eb62f
Faulting application path: C:Program FilesAdobeAdobe Photoshop CS6Photoshop.exe
Faulting module path: C:Windowssystem32KERNELBASE.dll
Report Id: eee8042f-b2e9-11e2-be44-0022192adee4
View 2 Replies
View Related
Nov 20, 2013
Just installed PS CC.Program opens but is non-responsive.Windows 7.
View 1 Replies
View Related
Oct 18, 2012
Win 7 OS. I am trying to use the light effect filter and when I select it photoshop gets locked up and won't respond until I end task in task manager (it says photoshop not responding in task manager). Is there a fix for this? I did all of my updates and it still happens.
View 2 Replies
View Related
Feb 29, 2012
I'm working on a drawing where I've been turning on/off a layer for parcels so I can select a well (point coverage/theme) or the parcel to get well owner and property information. Â All of a sudden I can't select the layer anymore - the checkbox becomes unresponsive. Â C3D and not map for this...
C3D 2011
Intel Xeon E5630@2.53Ghz
NVIDA Quadro NVS420 Dual Monitor
12GB Ram / Win7 Professional 64bit SP1
View 3 Replies
View Related
Dec 30, 2012
I can not import any photos using the impport button. I had the same problem with Lightroom 3.2 so I triued 4.3. Using Windows 8 intel i7 3.4 Ghz 12Gb Ram 256 Gb Samsung 830 Series SSD for catalog and installation of Lightroom. Pictures on another internal Hitachi HD
View 1 Replies
View Related
Jan 24, 2013
I am having major difficulties creating something relatively simple.Basically, I am working with 100% stage width and height and what I want to achieve is following:
Â
1. Have a fixed main menu area on the left side of the screen.
Â
2. And then have raw(s) of thumbnails filling remaining part of the screen to the right in responsive manner (this is what I am struggling with)
Â
how do I make this raw(s) of thumbnails responsive to the screen width and height!?To illustrate what I want to achieve please follow this link: URL....by making browser window narrow thumbnails are readjusting their position. I am not after animated effect but it would be a bonus!
View 4 Replies
View Related
Jan 24, 2012
I am getting this problem with my AutoCAD, whenever i am working in paper space and i move around the drawing my AutoCAD will freeze and become non-responsive while "regenerating model". Same thing happens when i switch between paper and model space and vice-versa.
I have gone and updated my AutoCAD with service pack 1 and the "ribbon" hotfix for this problem and it is still there.
Spec:
AutoCAD LT 2012
Windows 7 Home Premium SP1 64-bit
Intel Core i3 3.20 GHz
8GIG Ram
Intel HD Graphics (integrated im pretty sure)
View 1 Replies
View Related
Sep 9, 2013
I am surprised at how much of a challenge this has turned into
Â
[URL]
Â
1. Isolated out simple functionality
2. Created a stage called 'test' @ 2600x470pxs (targeting HD monitors to tablet)
3. Set Stage to 100 percentage width
4. Added a simple shape called 'test1' > converted it to a symbol
5. Centered on stage
6. Changed Settings as per below
7. Added this into the creationComplete Code Window:
sym.$("test1").css({
  width : '2600px',Â
  margin : '0 auto',
   position: 'relative'Â
});
Â
THE RESULT: it is fine at 2600 viewport but for 1024 it does not center.
[URL]
View 4 Replies
View Related
Feb 13, 2013
I'm from a Flash background, used to putting code in frames along a timeline.And I've adopted much the same approach with Edge Animate putting code on the stage at trigger points..My first question is how does putting code in stage.compositionReady differ from putting code in a stage trigger at time 0.00 (or 0.05)?
Â
How does a responsive/reactive design, and the Edge timeline work together?I've seen how you can lock a logo to top RHS corner. But what if you want a different smaller version of logofor when screen width is smartphone size.Will an Animate project with a timeline which includes animations and interactivity work in Reflow?
View 3 Replies
View Related
Jan 25, 2014
I like to create a respsponsive and dynamic menu bar witin Edge animate. I made attempts to make one (a test) and the responsiveness doesn't work in muse.
View 1 Replies
View Related
Dec 13, 2013
I have an animate file that contains many animations and one motion path animation. All animation elements of the animate file are responsive with the exception of the motion path animation which is not for some reason. Why does the motion path animation not repsonsive even though it is L, T, W, H coordinates are set as percentages?
View 4 Replies
View Related
Aug 23, 2013
how to make my photshop application fast few days ago it was working good but now its performance is slow and my computers speed is also slow. How to fix it?
View 1 Replies
View Related
Feb 26, 2014
I want to display a symbol next to the cursor. It should stay there like in this example here:http:/[url]....
Â
When using a responsive Stage (what is crucial to my project, because I need 100% width on all window sizes) the placement ot the symbol is dependent on the size of the window and the position on the screen. Here is an example of the problem: [url]....
Â
So, gathering the coordinates within EA seems not to be the right way.. Or any solution to compensate for the responsivness?
Â
// CompositionReady
sym.createsym = function(){
var position = sym.$("box").show();
[Code].......
View 1 Replies
View Related
Mar 3, 2009
Brand new computer, 32-bit XP, 4GB RAM (sorry, but too many of my important programs don't run on 64-bit), Intel 9650 quad, 3.0 GHz, RAID array, etc. And an ATI 4850 graphics card with 512 MB DDR3 RAM (on the Adobe tested list) and it doesn't work properly with OpenGL turned on: brush lines do not complete until I start another line, or click someplace in the image (which creates another line!); preview for the stamp tool doesn't work (there is no preview); 'ghost' panels over the image stay there even when they're moved (a mouse click is needed to make them disappear). Animated zoom works (nice feature), flick panning does (not really needed), birdseye view does (also nice feature), rotate canvas does (not needed that I can see), pixel grid (might be useful); I haven't tried the others. Bottom line: if I turn OpenGL off, it works fine, but those features are absent. I've been updating my drivers as ATI has (they've done several in the past month or so),
I don't know how the beta testing was done or how this card could be on the approved list, but someone fell short.
View 4 Replies
View Related
Jan 11, 2009
Konfiguration Dell
Win XPpro SP3,
CPU Pentium 3 3 Hz,
3GB RAM,
Graphic card: ATI FireGL V3100 128Mb with driver 8.543.0.0 ( 08october 2008)
Latest directX
The PS CS4 do not recognise the graphic card and GPU settings are grayed out in Preferences> performance.
View 1 Replies
View Related
May 8, 2009
im a photoshop cs4 user,But openGL doesnt work,i have an dell XPS m1730 laptop with 2x 8800M GTX sli,those cards are probably the high-end cards from the 8M series, so i think openGL should work on it...
View 7 Replies
View Related
Oct 7, 2013
Why Can I not enable OpenGl and thus 3d rendering in Photoshop?
Â
Adobe Photoshop Version: 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:10, Stepping:7 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 2
Logical processor count: 4
Processor speed: 2693 MHz
[code]....
View 10 Replies
View Related
Feb 6, 2013
I have been trying to use the 3D features of Adobe Photoshop CS6 Extended and have been having no success. I have enabled the 'Use Graphics Processor' in the Edit->Preferences->Performance dialog box. I have also ensured that I have the latest version of the drivers installed. The video cards (in a CrossfireX configuration) are Sapphire HD Radeon 7970s. The thing is, when I installed Photoshop a few weeks ago, I tested the 3D functions and they worked fine. Now they no longer do so. I have updated video drivers and Photoshop since then but when I reverted back to the older drivers, the 3D features still didn't work. I have tested OpenGL in Modo 601 and Houdini FX 12 with no problems.
View 5 Replies
View Related
May 9, 2013
The are some unpleasant bugs on CS6 when OpenGL is turned off. bug in PS-13.1.2(only) on Win7x32.When making selection, for example, with magic wand it`s edges are terribly blinking and shaking.
Â
And very old bug on all versions of CS6 for win.When the rullers are visible, try to shake the canvas with, for example, hand tool to left-rigth. The rulers will be cracked with artefacts.
Â
main bugy-feature is thaе the contrast of path`s lines is very poor on noisy midle gray areas, even when the antialiasing is off.
View 2 Replies
View Related
May 5, 2012
i did notice a lag (almostac ceptable, passable) using the brush tool , painting black and white on the maskes..i tried different video card from nvidia to ati , but did not find a real solution..the only solution is set the opengl off or set to basic,
View 20 Replies
View Related
Feb 25, 2013
How can i enable OpenGL in my Photoshop CS6. I have GTX 650 Video Card. Here is screen. [URL]
View 15 Replies
View Related
Sep 15, 2013
In photoshop cc I cant enable openGL however in Photoshop cs6 I can.
Â
 Processor 2 GHz Intel Core i7
Â
Memory 8 GB 1333 MHz DDR3
Â
Graphics AMD Radeon HD 6490M 256 MB
Â
Software OS X 10.8.4 (12E55)
View 8 Replies
View Related
Jun 17, 2012
When I try to use the rotate function I get this error: could not complete your request because it only works with opengl enabled document windows.
Â
I've verfied that OpenGL is on, and my video card drivers for my ATI 7970 are up to date. I've also tried CS5 and the CS6, with no luck.
View 5 Replies
View Related
Mar 10, 2012
Just curious what is the difference between Basic, Normal and Advanced OpenGL modes? I know Advanced method is more "GPU intensive" but how can I see the difference?
View 16 Replies
View Related
Nov 7, 2013
I have a pretty old computer with windows xp. and i use photoshop cs4 on it. but last night i installed photoshop again to do some things with it. but when i wanted to rotate something i got a error. about openGl. when i go to edit - preferences - performance. i cant enable openGl because of the following reason: Graphics hardware acceleration is unavailable. i need to update my driver and possible my video card. but the problem is when i go to the site of Intel and check of my drivers are fine it says i have te newest drivers for my pc.
View 2 Replies
View Related
Oct 28, 2008
I've just upgraded from PS CS3 to PS CS4 (default 32 and 64 versions) and I'm having problems with seeing image files above a certain size (even moderate size) with OpenGL Drawing enabled. Disabling OpenGL Drawing results in very slow image display (very easy to see the blocks being drawn one at a time), much slower than with PS CS3.
I'm running Vista 64 with latest updates. I'm trying to get PS CS4 32 running properly first, but PS CS4 64 seems to be having similar problems.
GeForce 9600 GT video card with latest driver 178.24 (updated yesterday and rebooted many times since then). That card is in Adobe's list of tested cards.
Main monitor (where I display Photoshop images) selected as primary in the driver dialog.
I put palettes/panes on my 2nd monitor.
I use Ultramon for 2nd monitor taskbar functionality. Turning Ultramon off doesn't seem to help, although I may need to disable Ultramon from launching on reboot.
No plugins installed yet in PS CS4 (32), as per Adobe kb advice.
4GB of RAM with Memory Usage set within Photoshop's Ideal Range.
For testing, I've been opening a few different size (px and bytes) RGB image files in Photoshop by dragging them from an Explorer window into the Photoshop window, then clickin in the Photoshop window to make Photoshop active and show its palettes.
First with OpenGL Drawing enabled in Performance, default Advanced Settings.
JPEG, 3600 x 2600 px, 4.5MB
- opens and displays ok (short delay before palettes appear)
- zooms and rotates smoothly
TIFF, 2 layers, 800 x 600 px, 16 bits, 2.5MB
- opens and displays ok (short delay before palettes appear)
- zooms and rotates smoothly
TIFF, 1 layer, 3600 x 2600 px, 16 bits, 54MB
- doesn't open properly, shows checkerboard instead of image, with checkerboard in navigator and layer icon in layers pane
- histogram is fine
- zooming and rotation are not smooth (jumps to new position/size)
- duplicate layer caused PS CS4 to stop working, with a close program dialog
- open PS CS4 32 again, no OpenGL message today, and OpenGL Drawing is still enabled (although I got the OpenGL Drawing message more than once yesterday)
TIFF, several layers, 3600 x 2600 px, 16 bits, 306 MB
- doesn't open properly, shows checkerboard instead of main image
- icons in layers pane look fine, same as navigator image
- checkerboard zooms and rotates smoothly
- duplicate layer is still checkerboard, back one history state stopped working / close program dialog
- started PS again, opened 1 layer TIFF, closed and tried to open multi layer TIFF again, but stopped working / close program dialog again
I then tried the same images with OpenGL Drawing disabled in Performance.
3600 x 2600 px JPEG
- ok, but slow, blocky redraw
2 layer 800 x 600 px TIFF
- ok, but slight delay in redraw (smallest of all the files, both in px and bytes)
1 layer 3600 x 2600 px TIFF
- opened ok, but slow, blocky redraw
multi layer 3600 x 2600 px TIFF
- opened ok, but slow, blocky redraw
From what I've read in various Adobe kb notes, it sounds like there's some kind of conflict with my video driver, but I haven't been able to figure it out. I even tried the registry plugin from the Adobe kb to disallow OpenGL Windows, but that didn't seem to make any difference. It didn't even stop me being able to select and use OpenGL Drawing in PS CS4.
View 1 Replies
View Related
Oct 26, 2008
I have to go into the prefereneces every sodding time to enable the GPU support.. I have the latest gfx drivers XPsp3, 8800gtx, Photoshop seems incapable of just working properly, I suppose I could ignore the error message, but it would still leave me to have go turn the stupid poor feature back on... which does actually work, but PS seems to think it needs disabling after I close the program.. wtf
btw I did follow adobes crap support docs on this issue...
*****************************
"3. Update your GPU drivers and then turn on Enable OpenGL Drawing.
If Photoshop crashes or disappears because of a GPU problem, it turns off Enable OpenGL Drawing and it writes a flag file in the preferences folder, called GPUinitcrashed. The next time you open Photoshop, this warning displays: "Photoshop has encountered a problem with the display driver, and has temporarily disabled GPU enhancements. Check the video card manufacturer's website for the latest software. GPU enhancements can be enabled in the Performance panel of Preferences."
Download the most recent version of your display driver from the display card manufacturer's site (Windows) or check to see if there's an operating system update (Mac OS).
Important: If you turn on Enable OpenGL Drawing before you update your driver, then Photoshop uses the old display driver again. If the driver wasn't updated, then Photoshop fails again. If you do not turn on Enable OpenGL Drawing, then the GPU won't be accessed and Photoshop does not fail.
***************************
View 29 Replies
View Related
Jan 3, 2009
I have a problem with CS4 under XP 64 bit. The 'Enable OpenGL Drawing' checkbox in the preferences is grayed out. I have a Radeon 4580 card which should work with CS4.
I recently had Vista 64bit installed and there was no problem there... OpenGL worked just fine in CS4, just as it should.
But I can't get it working in XP64. I've installed the latest drivers but still nothing.
View 8 Replies
View Related
Jan 17, 2009
When I have been working on a document for a few minutes, Photoshop suddenly disable the OpenGL features such as the Rotate View Tool. OpenGL does still seem to be enabled in Edit>Preferences>Performance...
I think the disabling happens when I use the Brush Tool.
If I save, closes and re-opens the document, the features are back. (I just created an action for this)
My video card is a NVIDIA GeForce 6700 XL with updated drivers.
View 1 Replies
View Related
