Photoshop :: CS5 / What Is Causing All Images To Import With Blue Cast
Nov 22, 2013
All of my images are now importing into Lightroom3 and Photoshop CS5 with a blue cast. I have reformatted the SD card, tried with other SD cards, re-calibrated my monitor with X-Rite colorometer, changed monitors, tried with another camera, changed card readers. The images appear as shot in Bridge, but when opened they come in with the blue cast. The same images import properly on my laptop. I'm shooting sRGB in camera and have tried a number of different shots, so artificail lighting is not the issue. All images that are already on my hard drive import properly. I was working in LR when this occurred, so, I think I must have inadvertently mades some alteration to the settings while working in LR. However, opening PS separately and bringing an image in independent of Lightroom has the same result. Images appear as shot in Adobe Bridge, then open with the blue cast.
View 6 Replies
ADVERTISEMENT
Jan 2, 2013
Few pointers as to getting rid of a blue cast on photos. I am using PSPx5.
View 14 Replies
View Related
Sep 18, 2012
I had incurrect setting when taking some pictures, which turned the pictures blue. Is there a way to correct this in Elements 9?
View 5 Replies
View Related
Aug 7, 2012
I have used gimp for years, and never tried to remove a blue cast from an image. I have several images I have shot over the years, of winter scenes, now I want to see them in "normal" colors. I tried a couple of plugins and gimp operations, but I have no real good results.
View 2 Replies
View Related
May 5, 2013
I am running XP and X5 Ultimate.My workflow follows :
File
Insert media file to library
Insert Digital media
Select drive in import from digital media box
Start
Then the screen goes black and the PC reboots with an error report box showing. The DVD has a UDF file system and it is 2.32GB and plays in Power DVD OK.
View 2 Replies
View Related
Sep 29, 2013
The fresh install of LR 5.2 renders all images - RAW and JPG - throughout the program with a very dark, green-yellow colorcast. The only place where images appear normal is in the Import dialog, while the thumbnail mode is active. Apart from that, every program module features this annoying reproduction. Here are some supporting screenshots (red rectangles are from me):
Import screen - thumbnail view - OK:
Import screen - preview - NOT OK:
Library view - NOT OK:
Strangely enough, if I export the picture to JPEG - without any modifications - the image appears normal again:
LR version: 5.2.1, 64b (tried the 32b version too, same error)
OS: Windows 8, 64bit
Camera: Canon 40d, imported images are RAW.
View 2 Replies
View Related
Jun 13, 2012
I have two images which are attached one has a blue border around it which is the end product, i have another image i need to add the same blue border to, again im not a designer im a Programmer out graphics designer left us recently so now i have to pick up the pieces until the new designer starts the dimension for the new image needs to be width:199px and the height is 122px
The contact-us image is the end product, the bridgnorth is the image im trying to add the blue rounded corners to, again at w:199px and h:122px
View 9 Replies
View Related
Dec 2, 2012
I was using Photoshop CS5 (64-bit) fine yesterday but today each image I open shows a loss of colour, everything looks like a blue tinted grayscale.The same with RAW files opened in ACR and all files opened in Bridge.When I open a JPEG version in Microsoft Image Viewer the colour is fine.In Windows, the thumbnails look fine with full colour in the folders.The loss of colour only happens when the image files are opened in Photoshop, Bridge and ACR.
View 9 Replies
View Related
Aug 1, 2011
I have a problem with the display of images that come out too blue. The thumbnail looks correct but the large preview image has too much blue. I have processed the same raw images in other software with no issues but this seems to be an issue with Paint Shop Pro. Is there a setting that needs to be changed?
Once I open the image the image in the raw converter it shows the color balance "As Shot" as a different value that what the Adobe software reads. Not sure why. You can try and adjust the blueness out of the image but why do I need to do this all the time when I don't have to in other programs.
If I open any image in the full editor the thumbnail takes on this too blue look as well, even if no color adjustments were made.
I have attached 2 screen shots that show the problem.
View 7 Replies
View Related
Aug 16, 2012
i have 1000 eps files to work with and i dont have the time to go to each one and change the color from blue to black! all are different shapes so i need a batch command that will keep the white, white and change any other color to black!
View 1 Replies
View Related
Jun 14, 2013
I recently opened a project I worked on months ago and noticed certain materials in my rendered images had turned blue. I created a new rendering in which all materials came out great and I saved it. Minutes later I opened the new rendering and it too became blue. I worked on this project for months and have not made any changes to materials. All previously saved images in my file, the wall materials, stairs, and certain furniture have all turned blue.
View 6 Replies
View Related
Aug 1, 2013
Jusy wanted to know how would I go about copying this image. I want everything the same besides the coloured shapes. I want to be able to edit the image. As when I try to trace over it with the pen tool I can never get it to look the same. What would be the easiest way? or would photoshop be better suited for copying the images without the blue and pink shapes?
View 3 Replies
View Related
Aug 8, 2013
I'm using PSE 11 on a MacBook Pro. My Blue Skies have too much green in them for my preference. I'm sure there is a way to change this, but how? Also, can I change the default 'blue skies' to something more to my liking for a long-lasting remedy?
View 1 Replies
View Related
Jan 13, 2013
I have 33 images and each image has a white background. To make an animated .gif file I open the 33 images in GIMP 2.8.2 as individual layers and export as a .gif file. For some reason though, when it creates the .gif file, the background turns blue?
View 4 Replies
View Related
Feb 21, 2013
I am using Lightroom 4.3 on Windows 7 pc. I have a collection with approximately 650 images. I was working in the collection and had all the images selected. Somehow I inadvertently must have hit a keyboard shortcut that effected all the images. All of the images are negatively effected and they now look terrible. When I go to the History Panel, all the images have "blue filter" as their most recent entry. If I select one image and go back to the step before the "blue filter" everything looks fine again. My problem is I have this effect in 650 images. When I try and do the change in one image and then synch to the rest, I don't know what box to check to remove this "blue filter" that has been added to all the images. I know I can do them one by one, but with 650 images, it's a long and tedious process. Any way I can remove the "blue filter" from multiple images in a collection?
View 4 Replies
View Related
Nov 4, 2012
This issue occured shortly after update to 4.2, but not directly after. I am using windows 8.
The issue that occurs is after importing images they are adjusted automatically to develop module cross process 1. After dealing with this annoyance for a bit of time I realized that I can not even "RESET ALL" the images to delete the adjustment. In delving into other images that have been in my database for quite some time, I have tried to "RESET ALL", which resets images to CROSS PROCESS 1. I have never set import to automatically adjust.
View 5 Replies
View Related
Mar 13, 2012
I just upgraded from LR3.6 to 4.0. When trying to import images the import module freezes for a few minutes and then displays the import screen. However, when selecting a source the program freezes again and eventually crashes.
I had the same issue when upgrading to 3.6 some time ago and then found that disabling some USB controllers solved the problem. This works for LR4 as well. As I don't need all USB connections this is a workable solution, however, disabling controllers should not be necessary to run a program.
System is an Acer Aspire 7811 64 bits w/ Intel i7, Win 7 Home Premium, 8 GB internal mem and no external drives.
View 8 Replies
View Related
May 19, 2012
I'm using LR4 with a Canon camera setup (Wind 7 Ultimate). I've got the auto import setting all configured with an incoming folder and destination. The app recognizes when an image is put in incoming folder and in fact it moves it to the destination folder. What is really annoying is that it leaves me at the import settings dialog and then I have to make all these choices as I would if I were manually importing.
Shouldn't the images be places in the desination folder and some view of that image be displayed in LR? It could be the folder view or ideally I want to see the last image imported at 1:1 size so I can review it and see if I want to take another shot? Maybe there is some flag I've got set incorrectly.
View 1 Replies
View Related
Jan 17, 2011
I'm trying to import photos into LR3.3, and the thumbnails are grayed out, as is the import button. The photos come from two other cameras -- one Canon Elf, the other I'm not sure. I received them through dropbox, and they open fine with Bridge and Photoshop CS4.
View 4 Replies
View Related
Mar 25, 2011
Lightroom will not display preview images during import of raw images. Any images in other formats display fine but with raw images I get a gray window the size of the preview image and the words "preview unavailable for this file".
Running Windows XP 64, Lightroom 3.3.
View 3 Replies
View Related
May 16, 2012
Ok so i have this image (Attached) im trying to remove the blue rectangle and the white rectangle leaving the blue swirl on the white back ground, iv tried using content aware but it comes out really bad, maybe im doing it wrong will some one be able to look at this for me, maybe it came out wrong because i have the blue swirl and content aware doesn't work correctly with it .
View 7 Replies
View Related
Jul 28, 2011
I'm running Windows 7 64Bit running Adobe CS5 Master Collection. But ever since I allowed CS5 Photoshop to control my printer (HP Photosmart Prem 310-C) to do a test print of a graphic that I created all of my Blues print a violet/blue color, no matter what color blue. It has even affected MS Word & MS Project when I try to print blue colored font or Gantt Chart blues will no longer print blue, but will print the same blue/violet color. I've even tried a brilliant blue which will all view great, but prints the same shade of violet blue! All my colors and Blues will view great! I've calibrated my monitor and I've reset my printer several times and still the same thing! I never had this problem before I downloaded Adobe CS5! A strange thing is that I can run check printer test and the data & image that is stored in the printer will print blues perfect, including running a copy direct from the scanner bed and it will produce perfect blues. I almost feel as though Adobe CS5 has possessed my PC and printer, how do I get it back to printing like it did before installing CS5 Master Suite?
View 2 Replies
View Related
Oct 21, 2007
I have a file open already with an existing image on it, how do i import another image into that same file. I know on CS2 it's File,Import,etc but on CS3 I'm completely lost.
View 1 Replies
View Related
Apr 16, 2012
I recently migrated from Windowx XP (32 bit) to Windows 7 (64bit). On the xp computer, I installed the driver for my epson V500 photo scanner, and when go to File--> Import, there is an option to import via espon scanner. However, in Window 7, with Photoshop CS4 64 bit installed, the installed scanner does not show up on the import menu.
I don't know how to get it to see the scanner as it does on my XP machine. I tried copying the photoshop plugins/import-export folder from the xp machine to photoshop (64)/plugind/import-export folder, but that didn't make a difference.
I really need the scanner to be visible inside photoshop.
View 2 Replies
View Related
Apr 7, 2008
I have 2 images.
I need to put them both in the same photoshop image.
View 1 Replies
View Related
Oct 27, 2012
After upgrading PS CS6 to 13.0.1, HDR Pro now renders terrible colors. The reds seem to be missing and there is a pea-green cast to everything. The screen capture from LR shows two 32-bit images made from HDR Pro the one on the left was created 9/19/2012 on the right was created 10/27/2012 after having upgraded CS6 and LR4. The color space in Photoshop is Prophoto
View 26 Replies
View Related
Aug 23, 2008
I took some pictures inside a church recently and a few came out perfect, but the rest had an orangey coloured tint to them.
way of removing this, either in Elements or CS3
View 1 Replies
View Related
Jan 16, 2013
Starting with a grayscale image in Photoshop Extended 12.1 x64 with with eight children standing in a row each holding a placard that has one letter spellling THANK YOU. I changed the mode to multichannel (that gave me one black channel); selected each letter; copied and pasted the letters to the second channel named PMS 186 U; erased the letters from the black channel with the grayscale image.
I now want to import this image to my page layout application, QuarkExpress 9.3. My printer told me a PDF or EPS would be fine. Neither was fine. The red letters didn't show up. I tried DCS1.0 and was given files separated into CMYK along with an EPS file (without the letters). I tried DCS2.0 that when opening in Photoshop the letters appear for split second that disappear and it will not import to my layout (unkown error).
View 3 Replies
View Related
Jun 29, 2012
I'd like to import multiple images into timeline, rearrange and edit the images, then print the edited images directly from timeline. Is it possible to save and print all the files simultaneously or would I have to do this for each frame individually?
View 4 Replies
View Related
Jun 1, 2008
Is there a quick and simple method of directly importing multiple images into separate layers of a single Photoshop document?
View 11 Replies
View Related
Oct 20, 2008
I'm not able to import my Raw files from my new Canon G10 camera. Is this an issue that Adobe has plans to rectify and if so how soon?
View 1 Replies
View Related
