When i load up PS everything is fine - very responsitive - but after a while (around ½ hour to 1 hour) ps slows down and any tool becomes very slow; brush, pan.. everything.I then save my work and reload PS - and everything works fine again. My system is a powerful quadcore box with 8 GB of RAM and approx 300 GB of scratch disk - all running on Vista x64.
View 7 RepliesWhen Saving an animated GIF in Photoshop CS3 the animated frames slow when viewed after the save. Therefore any gradient fades etc seem to stutter, about 25% slower than the frame rate set initially.
When the animation is played in photoshop it plays at the right speed, only slows when viewing the file after saving...
Graphic drivers are up to date.Photoshop is up to date.I cranked up the ram to 20GB in "Performance".
Â
Quick system specs:-
i7 920 @ 3.3 GHz
- 24GB RAM 1600 MHz
- 10K raptor drive
- 6950 2GB
I'll start off will some system specs:
Â
i5 m450 @ 2.40ghz
win7
4gb memory
approx 200 gb of free hd space
Â
running pse8 with approx 39,000 images, very small amount of video clips.
Â
people recognition and auto analyze are turned off.
Â
The issue is that when adding tags and captioning to multiple files the application slows down and sometimes freezes for short amount of time.
Â
Would installing additional ram totaling 8gb useful or does ram play any role in the performance of the application?
when ever I bring a clip into the timeline and play it as a "Clip" the sound is fine. When I play it as a "project" the video plays normal but the sound is slowed way down out of sync. This problem carries over to the burned DVD also.
View 6 Replies View RelatedI have a scene (original Sketchup > 3ds > max) with 100's of thousands of objects. About 60 odd materials. Due to mapping being specific I'm manually converting the standard materials to VRay Materials (latest vray 2.3) - Yes I'm NOT using the VRayScene Converter in this case. Even with ALL OBJECTS HIDDEN, after I get to like the 10th or 11th subobject material, max just suddenly slows down to a crawl. Just to change a colour swatch (not even a bitmap) takes sometimes like 2 minutes or longer for max to respond. I thought maybe it's an UNDO issue so I set UNDO levels to just 1. This didn't work. With Nitrous, I have viewport progressive refinement switched OFF. I tried switching to OpenGL and the viewports are actually MUCH more responsive in wireframe. In OpenGL it seems to last longer before the slowdowns start again. I'm not even at the render stage yet.
I'm on Win7 64bit with 16GB Ram. i7 2600k and 2 X SSD in raid 0. I have an ATI 6990 4GB with the lastest drivers (Catalyst 12.6). Max has the latest update3 installed.
When we work with Artistic text, corel X6 gets slow. This is on all computers with Corel X6. If we use Corel X3 it is ok. Any reason?
When using Artistic text there is also always automatic inserted several empty lines in bottom.
scince I installed AutoCAD Map 3D 2014 my Laptop is starting very slow. I have a Thinkpad W530 with a 500GB SSD, so the start up should be really fast. But scince i have AutoCAD the laptop needs about 10 to 15 minutes bevore i can open any programm. (as the lenovo update center says i have the latest drivers)
My girlfriend who has a Dell Inspiron laptop (with a normal HDD) has the same problem scince she installed autoCAD.Â
If I have Curve Editor open and I playback my animation (fairly complex character) by clicking "Play Animation" button, animation won't run smoothly.
Curve Editor Open (minimized and or maximized) = 6 fps
Curve Editor Open while dragging time slider manually = 15 fps
Curve Editor Closed = 28 fps
Also if I have "Statistics" info shown (shortcut 7) to see fps, it will slow playback about 40% more.
Would be nice to have some sort of fix on these As an animator having to close Curve Editor all the time is annoying.
3ds max 2012 was great leap towards better and faster experience, but there are still tons of old bugs and "still not working very well", like random numbers in reaction manager, or having different keyboard shortcuts for Edit Poly modifier or Editable Poly mesh (please combine). Graphite Modeling Tools was good addition, but would be nice to have it integrated completely with tools found in Edit Poly modifier and Editable Poly. Chamfer also needs upgrading, it still doesn't work very well with more complex places.
I am typesetting an A4 document using paragraph text. When I get about a third of the way down the page the computer slows right down and gets worse and worse as I go on. I have reformatted my hard drive and reloaded Corel draw but am still having the same problem!
View 8 Replies View RelatedAutoCAD will be running fine but if i use the Block editior everything suddenly slows down.
It doesn't matter what block I edit or if I even edit a block but if I open and then close the Block editor it slows considerably.
I have treid Regen, Purge, Audit, Turning off snap's, Polar Tracking etc but nothing seems to work with the exception of closing and resetting AutoCAD
I am having a problem with Autocad 2012 LT. It typically runs fine, but after using it for an extended period of time with multiple projects open, it becomes painfully slow to perform basic tasks like copying objects, opening projects, and saving projects. Restarting AutoCAD does not fix the problem, however, restarting my computer does fix the problem. I just don't want to be continually restarting my computer as on average I need to do this 3-4 times per day at work.
I am running Windows 7 64-bit on an iMac12,2
Processor: i5-2500S CPU @ 2.7 GHz (4CPUs)
8 Gigs RAM
I use a simple opacity mask on some equally simple (but large) artwork. It slows down the screen rendering so much as to make the file almost unworkable with the preview turned on.
View 1 Replies View RelatedLightroom 4.3 runs smoothly if I work on unmodified images.
Â
However, if I apply modifications on an image, retouching it afterwards becomes much slower, even if I render a preview AFTER I made modifications on the image.
Â
I tell you an example: I import a raw file to the program and I render it`s preview. Then I retouch the image - it works very fast, no waiting time, no Loading overlay.Where the problem starts: I import a raw file, I apply some modifications on it (for example a preset), then I render it`s preview - then I want to do more modifications on the image, which becomes very slow.
Â
I was monitoring the cpu usage of the computer. In the first case, the cpu usage during modifying the image is normal.In the second case, it goes up to 100%. It seems that applying modifications on an image makes working on it slow, no matter if you have the most up-to-date preview or not.
I recently purchased Corel VideoStudio X4. I installed SP1 and SP2. I am facing very long delays in a project with 1080p files. The slowness only comes when Smart sounds track is added. If I delete it, everything is back to normal. I have tried rebuilding the index for Smart sounds Quick tracks but the problem persists.
View 2 Replies View RelatedI,m running 2012 LT. Whenever I go to select a point on a region or move an object to a regions vicinity the computer hangs. Exploding the region relieves the problem. Large drawings or anything else don't seem to cause a problem.
View 1 Replies View RelatedI have an Excel file linked to a Table which has 3,400 lines. When the Table is unbroken a File Save takes 30 seconds. When the Table is broken it takes 30 Minutes to save. Makes the breaking feature for large table unusable.Â
View 3 Replies View RelatedSometimes when I select a polyline with many vertices (extracted contour line) Civil 3D 2011 almost stops working. I have tried locking the layer, but this still slow to a crawl.
Intel Core2 Quad Q6600 @ 2.40GHz
NVidia GeoForce - 8Gigs Ram - Vista 64 bit
I'm working on a rather large subdivision (not uncommon, certainly used to a longer-than-normal load time) but have found one of our XREF files to be bringing drawing loads to a screeching halt. We have XLOADCTL set to 2, which explains the creation of the temporary file.
I have previously gone into the file and reset the scale list, which speed things up by about 50%, but today it appears to be doing the same thing.
Is there anything I can do to prevent this from becoming a more serious problem? Can I add some sort of SCALELISTEDIT reset command to the acaddoc.lsp file?
Civil 3D 2014
Windows 7 Professional
Intel Xeon E31270 @ 3.4 GHz
8 GB, 64-bit
With the command window displayed at the bottom of the screen, everything slows down. The cursor momentarily freezes and it takes a second or two for commands to be fulfilled. Also, the command window is about 7 lines high; in the past, I have shrunk it to maybe 3 or 4 lines but I cannot shrink this wndow.Â
Then, when I push control-9 and the window disappears, everything speeds up to normal!Â
I tried turning off my internet connection and my McAfee Viruscan as well. Running without the command window makes it hard to draft. Since I type shortcuts, I figure I must have hit the wrong key and unleashed something unspeakably terrible.
I am running AutoCAD version 10 on my PC, with Windows XP Professional.
I've installed Illustrator CS6 recently and found the behavior of panning with the scroll wheel annoying. When I have low zoom values (e.g. 75%) the scroll wheel lets me pan U-D, L-R at normal speed, but if I zoom in (200% and up), the panning slows to a point where it is unusable at 600% and up. I use [Shift] to speed it up but at high zoom levels it's not enough. This wasn't the case for Illustrator CS5 or 5.5 where panning with the scroll wheel worked at the same speed at any zoom level.
View 1 Replies View RelatedI'm working on a document with the necessary combination of bitmap and vector. After importing textures 300dpi (A4/24bit/jpg) the reaction slows down the program significantly, to the inability to continue working in it. Texture takes 40mega while in memory, but in my opinion it is not quite so much, it should not materially affect the normal operation. I am using CDrawX3, I tried to open it in a version 9 or 10. The fastest I came subjectively is CDraw Designer v10. But he still falls.I tried adjusting the amount of RAM for Corel or lower resolution bitmap import at 150 dpi. It's practically the same. It does not even mention the interactive transparency, or weld/trim operation, etc. I think, that the X4 or X5 are the same. Every year new version seems the same old software with the polished exterior. I'm used to work in Corel for technical drawings with lot of combination of bitmaps and vectors but unfortunately it will want to look for something else?
View 13 Replies View RelatedI have a data-linked table (from an Excel 2007 file, 32-bit) in an Autocad 2010 drawing (64-bit, Windows 7 OS).
If the table is displayed as a single column, with table breaks off, the file will save within seconds.
If I enable table breaks, it will take at least 3-5 minutes for the drawing file to save.
I am unable to find any solution. I've tried using different table styles, different linked files/drawings, saving locally vs. on the network, headers and titles repeating vs not. The slowness is a major productivity killer.
Ok some times when I go to run details it pops up that it can not load the component database AecDtlComponents (US).mdb file. I go to options and can not do anything there. So I have to close it all down and hope when I reload AA it works. 9 out of 10 times it does. But this is a pain to do when ever you need to add detail stuff. Oh also this happens on more then one computer in the office. running 2012 with sp and all updates on windows 7
View 8 Replies View RelatedI'm trying to change "capture time" of multiple photos to a specific time.
Â
I know that there is "Edit Capture Time" feature under Metadata. But when I try to edit multiple photos, it says that "Modify the capture time stored in the selected photos by entering the correct time adjustment for the photo displayed to the left. Other photos (but not vidieos) will be adjusted by the same amount of time". And it really does.
Â
For example,
If A file's capture time is 1/11/2011
B file's capture time is 1/11/2012
C file's capture time is 1/11/2013
I would like to change their capture time to 1/11/2014. All the three files.
Â
But the current "Edit Capture Time" feature of Lightroom just adds three years to each file like this:
Â
A file's capture time -> 1/11/2014
B file -> 1/11/2015
C file -> 1/11/2016
So their capture times remain as different ones. And this is not I want...
Â
I've googled a lot and tried several programs other than lightroom as well, but the "Capture time" recognized by lightroom could not be changed by other programs.
I am updating capture time based on GPS Time (a bit OCD, I know) but when I change Capture Time the Date Time Digitized value does not change. This in in LR 4.3 and is not affected by whether on not the Catalog is set to 'Write date or time changes into proprietary raw files'.
View 8 Replies View RelatedI have been trying to figure out if I can make capture time changes to adjust for time zone errors or the daylight saving time mistakes where the capture time in the Metadata panel is off by 1 hour or so, and then have these adjustments saved permanently to the original files (master photos). This works for JPEG files and it also works for DNG files (after converting from CR2 to DNG). But it doesn't seem to work for CR2 files directly. If I used the "Save Metadata to file" option from the Metadata menu I might just get sidecar XMP files.
Â
Then I found this option "write date or time changes into proprietary raw files" in the Catalog Settings. This seems about right. But what does it do? I tried enabling that, created a new catalog and then imported some new CR2 files. I then changed the captured time and tried the Save Metadata to file option. It still spits out these sidecar files. It doesn't actually write this to the CR2 files.
Or does it? Perhaps I am not seeing it in Windows Explorer? Like IPTC vs. EXIF? I'm not sure Windows reads both. These are like different types or sections of metadata information about a file. So I just wonder what the benefit or consequence is of having this option enabled? Whatever it is, it is not very apparent. And as you can see from the screenshots above the capture time has not changed (not been saved) when you look at the file in Windows Explorer. Any changes are held in the XMP sidecar. Even thou I have enabled this EXIF option in Catalog Settings.
I note that from time to time I can't see the counter and this is quite an annoyance. When the invisible pointer hover over or passes over an object, the latter will highlight as usual. I have to close and restart the drawing each time due to this issue. Is there an explanation for it, even a solution to prevent this from happening?
NOTE : This is limited to the drawing area only. I can see the pointer in the menu/toolbar area and outside autocad but not in the drawing area.
I want to add a watermark to a photo which encompasses a progress time or finish time of a sports event. For example, if an event starts at 7.00 am, photos taken at 8.05 am, in the watermark I want to display 1:05 hr (or 65 mins).
View 1 Replies View RelatedI have a Canon S100 and just started importing photos and video into my LR 4.3 catalog. I convert RAW to DNG, and the Capture Time on the photos in LR is correct. However, the video Capture Time is shifted forward exactly 8 hours. I know how to correct the video Capture Time, but is there anything I can do to stop this from happening in the first place? I looked at what the metadata looks like in Bridge.
PHOTO:
Date Created = Correct Capture Time
Date File Modified = The time I imported the file into LR.
Â
VIDEO:
Date Created = Capture Time + 8 hours
Date File Modified = Correct Capture Time
How do I control time without using the Time Configuration Dialog box?
Also on a side note; what's the difference between the Dope Sheet and the Curve Editor?
3DS Max 2011
Windows Vista 32 Bit
Dell XPS M1530
Intel Core 2 Duo CPU T5550 1.83 GHz
2 GB of Ram