Photoshop :: CS4 Losing Track Of My Mouse In Vista?
Mar 25, 2009
I've been having a strange problem with my mouse in PS CS4, running in Vista 64 Ultimate.
About 20% of the time that I'm clicking in an open image, PS decides that the cursor should be somewhere else on the screen. This doesn't affect any UI elements (like clicking in a tool or dialogue box), just working in an image. PS will randomly put the cursor several hundred pixels away when I left-click in the image window.
Everything else seems fine up until the point that I click - brush cursors show up in the right place, and if I'm in healing brush or clone stamp, for example, the preview image shows up in the right place --- until I click.
Sometimes, PS will drag from a point many hundreds of pixels away in a straight line near where my mouse actually is.
As this is affecting about 1/5 of my clicks, this makes PS all but unusable. I don't have any mouse or tablet management software installed. Any thoughts? Anybody else run into this? I do have current drivers for my video card, FWIW.
View 10 Replies
ADVERTISEMENT
Oct 17, 2012
I have Lightroom 4 running on Macbook Pro (mid 2010 with Mountain Lion), and it loses mouse control totally after a while.
Problems started when upgrading from 3.6 to 4.1 and upgrading to 4.2 did not work. Sometimes I might be able to use the software for hours, sometimes problems start just after ten minutes or so. Only restarting the software seems to work.
Lightroom is only program having this kind of problems, and problem stays same, no matter am I using external mouse or trackpad. Keyboard commands are working all the time and Lightroom seems to respond those normally, only mouse control is totally lost or acting randomly. If I use iPad with Air Display as second diplay, mouse seems to work there just fine even when window in MBP's display is having problems (I saw problem before installing Air Display).
View 4 Replies
View Related
Jan 28, 2012
When cutting video shots in sync with a music track how can I remove part of a clip and replace with a new shot. I know there is a replace clip facility but there appears to be no way of editing the new clip. What I would like to do is leave blanks in sync with the music and fill in correct length of shot later. The same question for overlaying video shots of an interview and holding sync when returning to interviewee.
View 4 Replies
View Related
Dec 9, 2013
In VideoStudio 6, how does one connect the voice track to the video during the editing process?
My specific issue is that I have to go back and edit material sometimes that precedes the voice track I already have laid down, but when the time frame of the material after my new edit I have to go back and drag the voice track to the proper location. I would like to be able to permanently "attach" the voice track to the specific video clip and have it follow that clip as it is moved, time wise, during the editing process.
Is there a means to make this happen?
PS - I realize there is a work around way - just publish each clip and then rebuild the final project but that is NOT what I want to do.
View 2 Replies
View Related
Jan 17, 2012
I see that you can split the audio from the video. Can you do the reverse and link the audio back into the video say after you split, cut and mute an off camera scream? It would just make it easier to add clips before the edited one, although it's not all that hard to sync things up.
View 2 Replies
View Related
Feb 20, 2014
Or can I? "Link" is greyed out
View 8 Replies
View Related
Aug 15, 2011
I'm curious how many of you use note track in the track view/dope sheet? It is running damn slow here, 15sec to add a note track, 30sec adding a note in dopesheet and 1 mins before I could open up the note editor. I doubt it is being useful at all.
Moreover, the infamous Max MotionClip Manager bugs is caused by that... so do you really use it?
View 1 Replies
View Related
Feb 16, 2011
Is there any way to push the video in the video track after the title track is completed ....
View 4 Replies
View Related
Apr 12, 2013
how to turn off the mouse function when the mouse cursor moves over a feature, such as an edge, point, or surface, and highlights it. I don't want it highlighting the features automatically. I want it to highlight once I click over a feature. My colleagues and I are very distraught by this feature, and will be discontinuing our use of your products that do not allow us to turn this feature off. I'm not sure why you'd want to weed your customer base like this, assuming that I can't turn this option off from the research I've done pouring through the hundreds of complaints related to this issue. I haven't been able to find any posts recently, or regarding Inventor 2013 specificially on this issue, so I was hoping this version had the option of turning it off. Does any of Autodesk's software, such as AutoCAD, have the option of turning it off?
View 5 Replies
View Related
Oct 30, 2013
I followed the tutorial on this page: [URL]. However, my animation auto plays and mousing over has no effect. I have searched and sreached to no understandable (to me) avail. Here's a link to the file: [URL]
View 2 Replies
View Related
Jul 20, 2012
I am bringing DPX files into Photoshop as Image Sequences. Afterwards, I am using Export…Render Video, set to Adobe Media Encoder, H.264.
The resulting H.264 files have an AAC audio track (presumably, with nothing but zeros, because there is no audio with this material.) How do I prevent Photoshop from adding an audio track?
I don't see a way to delete the audio track from the timeline. I don't see a way to export only video in the Render Video settings.
View 3 Replies
View Related
Jan 9, 2009
I am running Vista x64 Ultimate on a QX6850 system with 8GB of RAM. I also have 2x XFX8800GT graphics cards running in SLi with the latest Nvidia drivers (181.20). Dxdiag testing provides no errors.
The GPU support features in CS4 x64 (and x32) is greyed out with the text wording of no support in Photoshop standard. Based on some of the threads posted here, I tried enabling or disabling some settings in the Nvidia control panel, but the only one that seem to enable the GPU support is to deactivate SLi completely (which sort of defeats the purpose in 3D graphics).
Does CS4 support an SLi setup? If not, will there be any difference in performance with SLi disabled and using the CS4 GPU support vs the other way around?
View 1 Replies
View Related
Feb 21, 2008
Service Pack 1 for Vista is available. I just installed it. Other than it reset the native resolution on my main monitor, it went without a hitch.
Recently, it seems, that Vista has been lamb-basted (what does that actually mean) as a nasty OS. It is not, I have been using Vista Ultimate 32/64 without incident. SP1 is no larger than SP1 for XP (in ratio to installation size).
Any one who says that you should choose XP over Vista for a new computer installation is nuts.
Vista is a fine OS, having used it for the last 10 months I can confirm that is rock stable. I now use the 64 bit version exclusively, it has matured very quickly and is a great way to run a system.
View 37 Replies
View Related
Jan 5, 2009
Under Vista Ultimate I cannot get Photoshop CS3 Extended to run, it will open up and then just sit......Adobe Bridge CS3 2.0.0975 opens and works just fine. So does Lightroom 1.41.
I even tried opening PS from these programs, but just the same.
I then installed Corel Paint Shop Pro X2 and that works perfect too.
I have tried removing and reinstalling, repaired and updated but it makes no difference. It will install and also do the repair just fine.
Changing the compatible mode and appearance to Windows Classic (from Aero) makes no difference. I am the only user and administrator.
Has anyone with basically this type of system been able to get Photoshop CS3 Extended (after having these problems) up and running?
PC information:
AMD Phenom 9950 Quad-Core Processor 1.61 GHz
8.00 GB Memory
64-bit Operating System
Western Digital VelociRaptor WD3000GLFS 300GB 10000 RPM 16MB Cache SATA
3.0Gb/s Hard Drive
Vista Ultimate Version 6.0 (Build 6001:ServicePack 1)
View 2 Replies
View Related
Jun 1, 2008
A few days ago I bought a new PC with Vista (MEDION® AKOYA® P36830
Authentieke Windows® Vista® Home Premium, AMD Phenom X4 9500 Quad Core (2,2 GHz),
NVIDIA® GeForce 9600GT, 4 GB DDR2 RAM, 500 GB Hard Disk).
Since I will use this PC for my graphical work I tried to install a trial version of Photoshop CS3.
But... I can't even install the program on the PC !
The setup starts but nothing happens anymore.
In the Task Manager I can see that the process is running but that is all.
I've tried to change the priority of the process to higher and lower with it wont install.
what more can I do to get PS CS3 working before I buy the complete package ?
View 2 Replies
View Related
Feb 2, 2008
I've installed Vista 64 Business on a AMD AM2+ platform with a Athlon Dual Core CPU (BE 5000). When installing CS3 Photoshop everything seems to be fine, no error messages during the install.
I try to start Photoshop...it won't open. The Photoshop gray screen comes up with the menu at top, but then it just sits there. Once I got the window with the serial number input, but after entering the number it stopped as well. The only way to close Photoshop is with the Task Manager.
I've tried different installations: Photoshop on a new Vista installation without having any other programs installed (no FW or AV), on a installation with different other applications running and so on. Everytime I get the same result: gray screen and stop!
View 6 Replies
View Related
Mar 23, 2009
I have been using this combination successfully for over a month when it changed. I tried to open CS4 normally and got the error message "Could not open a scratch file because the file is locked. Use the Properties command in the Windows explorer to unlock the file". This error message is then followed by : "could not initialize Photoshop because the file is locked. Use the Properties command in the Windows explorer to unlock the file".
So I can't open Photoshop -
View 13 Replies
View Related
Jul 13, 2012
My Photoshop CS6 PSDs are getting flattened if opened by any previous versions of Photoshop, despite not being saved just opened. When I open the original in CS6 again, all layers are merged. Where there were 12 layers, there is now one. This is causing loads of problems.
View 11 Replies
View Related
Nov 20, 2007
I am losing functions in nearly every menu in photoshop. I have tried v.8 and v.10 with the same results... I have no access to nearly every effect menu, the select menu is almost as worthless and I can't do anything on it anymore. The only way to make the function useable is to open an old file that was made back when it was working. I tried reinstalling, after that didn't work it forced me to use a company version of CS3, which has the same problem.
Does anyone know what may be going on? I don't understand what file in my computer may be doing this... If anyone has had any similar problems, please post without hesitation. This is the second photoshop forum I tried, I hope photoshop team can help .
Here are two screenshots of what the effects menu looks like; sorry about the size, I have huge resolution and didn't think about reducing the image size:
I am running windows Vista Ultimate 64-bit and I am mainly trying to fix Photoshop v.8, but fixing this one will evidently fix v.10 as well.
View 3 Replies
View Related
Apr 13, 2008
I have same shortcut file for several years. The pattern is recent shortcut, always seem to disappear. They stick for a bit, between many lauchnes and quits of CS3, but then need to be re-added. I've done the delete preferences trick, I'm out of ideas.
View 3 Replies
View Related
Dec 6, 2007
I'm trying to break up sections of my website design, but when I copy and paste the various sections their edges become somewhat transparent.
Those edges shouldn't be soft because this is part of a larger solid image.
View 9 Replies
View Related
Apr 11, 2013
I recently started using my DSLR (Nikon D800) to shoot some video. My wife has several musical projects and I'm just shooting some basic demo videos. But since these are musical projects, the audio is important. And while I plug the camera microphone port directly into the mixing board, and get really good audio, I still want to be able to work with the audio track separately to do some basic equalization, volume adjustment, etc.
Photoshop's video handling is pretty basic, and it seems all I can do with the audio track is delete it, adjust the master levels, or add an outside track.
Is there a way I can strip off and save the audio to a separate file and process it with audio software (what software?) so I can then re-add it Photoshop?
Am I approaching this from the wrong angle? I don't want to spend tons of money on a full video editing package. Is there audio software that can open the video file and just edit the audio track?
View 1 Replies
View Related
May 13, 2008
I am using PhotoShop CS3 Extended along with MS Vista. for some reason when I open more then one image or file at a time, I recieve a message saying Photoshop has stopped working and then it closes out of Photoshop.
I did not have this issue when I used CS3 on XP.
View 9 Replies
View Related
Oct 31, 2007
I've just installed a fresh copy of Windows Vista Business last night. After installing Photoshop CS3 however, I noticed a very serious lag issue. I looked into the problem a bit on google and this forum but did not reach a solution.
In general, the issues are as follows:
1. Opening and closing even the smallest of files takes a ridiculous amount of time.
2. Moving the mouse cursor over the toolbar or menubar requires up to 3 seconds before a response is received.
3. Right click menu requires up to 3 seconds to appear
4. Application of any tools shows a noticeable delay of action.
The most common suggestion is the "Network Printer" solution, which was not helpful to everyone including me. I also tried to change the performance settings and the cache level according to the optimization guide on this site, that also did not solve the problem.
I tried to run the software in XP pro SP2 compatibility mode, did not make a difference in performance. Disabling all the graphic options for Vista such as Aero Experience also was useless.
I'm just wondering as to whether we ever did reach a solution to resolve the issue or is this problem still left hanging?
CS3 ran fine before my upgrade from XP Pro SP2, I do not believe my hardware specs have anything to do with the lag issue. Yet, I'll leave it below just in case you guys need it as reference...
Acer Aspire 5672:
Windows Vista Business Edition
Centrino DuoCore 1.66GHz T2300
2GB 667MHz RAM (1GB x 2)
ATI Radeon X1600
120GB Hard-drive
View 7 Replies
View Related
Feb 18, 2008
I have been running Photoshop CS Version 8.0 under Vista for 5 months when all of a sudden I cannot finishing loading Photoshop. It hangs after displaying the message "Reading Text Global Resources...done". I uninstalled and re-installed Photoshop in another directory but it still hangs. Does anyone have a clue as to what could be the problem? Is it a Vista problem or is it an environmental problem? I have 4 gig of memory and 200 gig of free disk space. In a nutshell I cannot get Photoshop to finishing loading.
View 5 Replies
View Related
Feb 10, 2009
I just bought Photoshop CS2 (the Polish version) on the internet. I am trying to install it on my HP Pavilion dv7-1080ew laptop. I can't get past the end part of the installation process, though. When it gets to registering (the very last part of installing), it starts rolling back the changes. I turned off my AV, tried running it as administrator, in compatibility mode for XP... still doesn't work. Is anyone else having this problem?
View 5 Replies
View Related
May 6, 2009
I'm having a little trouble with CS2 droplets. They work fine on one of my PCs with windows XP but when I try to use them on a machine with Vista a message comes up 'Photoshop CS2 has stopped working' This also happens when I double click on the droplet.
View 2 Replies
View Related
Mar 20, 2008
I have downloaded the trial version of PhotoShop CS3 but when I try to install it unzips ok from the initial setup file, but then when I go into the created folder on the desktop and run the setup program in there a dialog box appears, nothing else happens, then it disappears after a few seconds. The process for it appears then disappears in Task Manager also.
View 20 Replies
View Related
Jan 24, 2009
Installed CS4 on Vista (32 bit). All went well but I can't get it to open, I've tried on XP and it works fine.
View 1 Replies
View Related
Apr 10, 2009
Is Photoshop CS4 extended supported by Vista 64? (I want to change from Windows XP to Windows Vista 64).
View 1 Replies
View Related
Jan 7, 2009
I am running Photoshop as part of the CS4 Suite on a bootcamped intel mac pro towers using Vista Business with 4 gigs of Memory. We are running in 32 bit mode because of the Apple screw up with Carbon 64 so that both sides of the house windows and mac match.
Photoshop is currently only seeing 1639 MB of the RAM instead of the performance on the Mac of about 3000 MB
So does anyone know what is going on here and how I can get Photoshop and or Vista to recognize most if not all of the RAM installed on these machines.
Specs are below...
Adobe Photoshop Version: 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Operating System: Windows Vista 32-bit
Version: 6.0 Service Pack 1
System architecture: Intel CPU Family:6, Model:7, Stepping:6 with MMX, SSE Integer, SSE FP, SSE2
Physical processor count: 4
Processor speed: 2793 MHz
Video Card: NVIDIA GeForce 8800 GT
Video Mode: 1680 x 1050 x 4294967296 colors
Video Card Driver: nvd3dum.dll,nvwgf2um.dll
Driver Version: 7.15.11.8048
Built-in memory: 2037 MB
Free memory: 1178 MB
Memory available to Photoshop: 1640 MB
Memory used by Photoshop: 55 %
Image cache levels: 4
Application folder: C:Program FilesAdobeAdobe Photoshop CS4
Temporary file path: C:UsersMGDAppDataLocalTemp
Photoshop scratch has async I/O enabled
Scratch volume(s):
C:, 349.4G, 324.0G free
Primary Plug-ins folder: C:Program FilesAdobeAdobe Photoshop CS4Plug-ins
Additional Plug-ins folder: not set
View 9 Replies
View Related
