Photoshop posts a failure notice that the GeForce GTX 295 is outdated and unsupported. Newest driver has been updated. I have installed the script to allow Photoshop to talk to older video cards with no prevail. Open GL settings are dimmed aswell.
View 2 RepliesI just upgraded from a GeForce 8800GTX to a GeForce GTX295 (which is in fact a SLI GXT260 on one card).
I am running Vista x64.
Since the upgrade, Photoshop doesn't let me enable GPU acceleration (in 32 and 64 bit version). The newest beta driver is installed and I did not change anything else on this machine.
From the Nvidia web site it says that the GeForce GTX 560 Ti supports:Â DirectX 11 > 3D Vision > PhysX > CUDA > SLI >
Â
301.24 drivers have been used and have downgraded to 296.10 to see if that would work, but it didn't.
Â
When I check the performance tab under Advanced it shows that the OpenCL option is grayed out. When I check the Sys info log it also shows that OpenCL is Not availible (included below).Â
Â
Why is this and when will it be fixed? Now that CS6 is shipping it should be working.
Â
Adobe Photoshop Version: 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
[Code].....
I am running a brand spanking new rig.
Windows 7 pro
intel i7-3930k cpu 3.2ghz
32 gig ram
64bit
Geforce GTX 680 with updated drivers
Â
Adobe Photoshop CS6 keeps crashing. I do not think it supports this GPU, which is a major bummer. Do i need to swap GPUs to a 500 series?
Just recently Photoshop CS5 64-bit has not been detecting my GPU. It was working perfectly fine for over a year until about two months ago after, I guess, a driver update? I'm not sure which version may have caused it to happen but I just upgraded the driver to the one that was released today on Nvidia (GeForce 306.97 Driver), doing a clean install, and Photoshop is still not detecting the card...It's frustrating as I'd like to be able to use the Open GL functions again. I also have two hard drives if that could be any source of the problem.
Â
To elaborate, I am running an SSD (C:) and an HDD (E:). I have Photoshop and my GPU drivers installed in C:.
Â
Anyways, I opened up preferences and tried switching the scratch drive to E: and restarted Photoshop. I got an error saying "Could not open a scratch file because of a disk error." Pressing "OK", I received another error message "Could not initialize Photoshop because the preferences file was invaled (it has been deleted)". Pressing "OK" again gets Photoshop to start up and suddenly it is recognizing my GPU and allowing Open GL functions. But as soon as I close out of Photoshop and re-open it, it's back to not detecting my GPU and has Open GL functions grayed out.
I searched the forums for similar issues and came across with the possibility of permission issues or missing TEMP folder...however the permissions look fine and there is a temp folder in my C: drive. What's with this? I'd love to find a fix ASAP as I use PS every day and it's starting to become a real work efficiency issue!
I have a Geforce 8600M GT in my Macbookpro 10.6.8 2.2 GHz Intel Core 2 Core with 4GB 667 Mhz DDR2 SDRAM. I tried using it for 3D in PS6 but it doesn't seem to be 'enabled' and OpenGl unavailable. In the preferences in PS it states that graphics hardware unavailable and that I should upgrade my driver or card but on the adobe specifications for PS6 my card seems to comply and I can't find anything to update.
View 11 Replies View RelatedThe openGl is 3.0. So I think the opengl in Photoshop have to work or is the IGP to weak? With a ATI 4670 it works fine and this card is not listed in the kb eather.
View 6 Replies View RelatedI'm about to replace my aging computer and need advice on the video card. The above is standard and the Nvidea 9500 GS or ATI Radeon 4650 are offered at nominal cost for upgrades. I have no interest in gaming and don't watch movies on the monitor.
View 7 Replies View RelatedI install Photoshop cs6 trial on my PC, they are all pretty old equipments. Photo Shop CS6 shut himself down after i start it every time. Is that because of Graphic card?
Followings are parts of my PC.
WIndows XP pro SP3
CPU: AMD Athlom 2500
RAM: 2G
Graphic card: NVIDIA GeForce3 Ti200
I am trying to enable OpenCL support in photoshop. Below you will find detailed specs
Â
OS Information: Microsoft Windows 7 Professional 64bit 6.1.7601 Service Pack 1 Build 7601
Processor: Intel Core i7 950 (4x 3.06GHz/8MB L3 Cache) clocked to 3.2Ghz 159.99x20.0
Motherboard: Sabertooth X58
Memory: 12 GB [4 GB X3] DDR3-1600
HDD: 2x 60 GB Corsair Force Series F60 MLC SSD Run in RAID 0
System Drive:Â 1TB HDD
 Â
GPU Information :
Â
2x - NVIDIA GeForce GTX 460 - 1GB - PALIT Sonic Platinum - Core: 800MHz - SLI Mode (Dual Cards)
Â
For quick reference on the cards check here: [URL]
Â
I have done a clean install of the GeForce 314.07 Drivers (releaesd 2/18/2013).  In addition i have done clean installs of 3 Prior GeForce releases.
In case this cant be seen well this can also be found at [URL] For detailed specs check [URL]
Â
I can run OpenCL benchmarking tests and they work great, but I still cannot active it in photoshop.Â
Â
Ive tried using sniffer_gpu.exe in the photoshop folder at numerous different times and intervals, (while photoshop is open, after i close it, after a fresh reboot), yet i still cannot get it enabled in photoshop.
NVIDIA GeForce 9400M:
Â
 Chipset Model:         NVIDIA GeForce 9400M
 Type:         GPU
 Bus:         PCI
 VRAM (Total):         256 MB
[code]....Â
3D features require a minimum of 512MB of vRAM. Photoshop has detected less than that on your system.Updating the driver of your graphics card may resolve the issue. URL....
I just bought a brand new Alienware M17x R4 with Windows 8 Pro x64 and Photoshop CS6 won't recognize my NVIDIA GeForce GTX 675M GPU?I've already updated Windows 8, Photoshop and the Nvidia graphics driver.
Â
I spent so much on a nice graphics card but now it seems PS CS6 can't even use it. It's using the Intel HD4000 instead: I also tried this: URL... According to this, my graphics card should work, it's a NVIDIA GeForce GTX 675M, which is a 600 series GPU: URL...Tested video cards for Photoshop CS6 #.
Adobe tested the following video cards before the release of Photoshop CS6Â. This document lists the video card by series. The minimum amount of RAM supported on video cards for Photoshop CS6 is 256 MB. Photoshop 13.1 cannot display 3D features if you have less than 512 MB VRAM on your video card.
Important: This document is updated as newly released cards are tested. However, Adobe cannot test all cards in a timely manner. If a video card is not listed here, but was released after May 2012, you can assume that the card will work with Photoshop CS6.Adobe tested laptop and desktop versions of the following cards. Be sure to download the latest driver for your specific model. (Laptop and desktop versions have slightly different names.)nVidia GeForce 8000, 9000, 100, 200, 300, 400, 500, 600 series.
i just upgraded the driver for my nVidia GeForce 680 graphics card from the nVidia website. the specifications are shown below. Photoshop CC now says that it can't detect my graphics card.
nVidia verstion 327.23 WHQL
release date: Sept 9, 2013
operating system: windows 8 64-bit
Â
will adobe have to issue an update to photoshop CC to fix the problem?
which card to download from nvidia to upgrade the Geforce 7600gt on my windows xp prof. 32bits? I need to enable opengl and opencl in Photoshop cs6.
View 2 Replies View RelatedI have never had anything go wrong before, so I do not know what to do about this, but I cannot do any 3D work. I was hoping to learn new skills. I am working on a Mac pro which is about five years old. Do I need to upgarde this card, download something for it? Buy anew card?
View 11 Replies View RelatedIt seems I have no more room to install a stand alone Video Capture Card and the maximum video card I can and am about to install on my Gateway 700XL computer is a GeForce 7950 GT AGP which does not include video capture. So, I have been told that I should consider buying a "Dazzle Digital Video Creator DVC-90 Video Capture Device and Movie Maker" devise. I assume I have no need for anything related to the "Movie Maker" for I have VS11Plus and may soon upgrade to the latest Video Studio if my system is compatible with the latest. URL.....
DAZZLE CAPTURE DEVICE: URL....
Something else that may be worth adding is info on the Camcorder which is: URL....
Any ideas what may be the name of this font?
View 2 Replies View RelatedThere are many choices and im trying to copy the letters so is there a program that i dentifies font/text/arial etc etc. When i say copy i mean type so that it looks exactly like the letters that were there previously.
View 4 Replies View Relatedidentify the font that has been used in a logo but can't load it up here.Â
Â
[ admin says: don't put your email address on a public forum, unless you really, really like SPAM ]
identify this curly cue font?
I know it is a public font...
I had it installed on an older Windows system...
This function is working properly in os x, however on windows when I right click within the canvas I only get a list of all the layers under the mouse,historically since as far back as I can remember since photoshop had layers (rev 3.0 in 1995?) when you right click in windows within the canvas, you get a list of all the layers under your mouse, with the uppermost layer highlighted for easy identification and location of the contents of your layers. I've run all patches and updates and have even uninstalled/re-installed CS6.
View 11 Replies View RelatedI need to identify the Adobe Photoshop CS4 Trial installation to that of fully purchased/licensed installation, only using files/registry entries.
View 2 Replies View RelatedI am a huge fan of this photographer and over the years these same lens flares are in her work. I know they are not natural because they are the same in several photographs. I would love to know where I can find these!
You can see them here, in the header image but also if you scroll down to the blog entry, the first image has a nice clear example.
[URL].........
So I guess my question is for those of you who are experienced with re-touching or image editing, so here goes I have some images and im trying to tell if they have been edited in as far as being able to know with some degee of certainty if in fact the image has been altered.
I guess Im asking for some tips/hints on what to look for and if there is any tell tale signs of editing that would indicate that yes the image has been altered, now I know that there is no way to restore the images to thier originl content but if I could tell if the images have been edited that would be good enough in this case..
How do I identify original photos so I can delete the many duplicates I have as a result of computer backup and restore issues?
View 3 Replies View RelatedI am trying to transfer my Elements 9 data files from a PC to an iMac. My attempt to generate a backup file from the PC keeps stopping at about the 85% point with a message saying "faulty file". Is there a technique I can use to locate this "faulty file"?
View 1 Replies View RelatedOn my XPS 400 system I have a Geforce 7900GS 256MB card installed and on the other system, an XPS 730 H2C, I have dual GTX 280s.
Quadro cards designed for PS CS4 were simply way outside what I could afford. Just like I could not afford faster (above 7200 RPM) harddrives.
I figure, that is the experence of most PS license holders who visit and post in these forums.
My lay research tells me that "possibly" the biggest difference between, say my Geforce latest and greatest, and your Cadilac Quadro is in what the respective drivers are programmed to do.
The Canon 6D produces HDR photos from 3 intermediate pictures, and it discards the intermemdiates. The exif data on Lightroom (5) does not seem to identify the HDR photos, and I cannot find any other way to get Lightroom to identify HDR photos. The HDR photos are generally recognizable, visually, but it would still to have Lightroom identify them.
View 5 Replies View RelatedI have the layers tab open in my toolbox, so I can see all the layers listed. I'm wondering if there is a fast way to find a layer. I'd like to click on my image and (ideally) see the layer highlighted in the toolbox, so I don't have to search for it.
View 2 Replies View RelatedIllustrator Artboards and Layers are unrelated. Is there a way to find out the layers contained within an Artboard?
View 3 Replies View RelatedLightroom 5.2 is not identifying my sigma 35 mm 1.4 for lens correction anymore. It was working fine last week.
View 2 Replies View Related