I recently had to do a complete reinstall of my PC and prior to doing so used the Deactivate function. Following the reinstall of my system I installed CS3 once again from the CD and the install went without problems. Of course I now had the original version (10) installed and so used the update facility from within CS3. Following this I was presented with an error message advising that there was a problem installing 10.0.1 and Camera Raw. Despite running the installer again via the 'Try Again' button the problem persisted and so I pressed Cancel.
Following this I went to the Adobe site and downloaded the 10.0.1 update outside of CS3 and the install/update went without any problems. I also did this with Camera Raw. Now whenever CS3 starts up I get the splash screen indicating version 10.0.1 and from within CS3 (Help - about plug-ins) I see that Camera Raw 4.3.1 is installed.
However, a few moments ago the installer once again appeared indicating that version 10.0.1 was ready to be installed and so just to get rid of the pop up I clicked 'Install'. Of course I received back could not install message and I suspect that this is going to pop it's ugly head up on future ocassions as well.
Does anyone know where the fault/error lies and how I stop this pop up advising me that 10.0.1 is ready to be installed when it seems that it already is.
I get the following error message when I attempt to update X6. Not sure what to do about it.
CRC error: The file C:ProgramDataCoralDRAW Graphics Suite X6.1CGS16w_cproc_p_11.1.048_redist_intel64.exe doesnt match the file in the setup's .cab File. The medium from which you are running the setup may be currupted; contact your software vender.
I have PS cs6 mac 13.0.1 and I am getting error U44M2P7 when updating to 13.0.2. I understand that others were successful by unistalling and reinstalling PS. I have tons of plugins, extensions, additional filters, and I am afraid I may lose all this is I unsinstalled PS cs6 and reinstall it. Error summary from logs is pasted below.
ERROR: DW023: The extension payload: {0BFE639B-194A-415D-9664-43B9D7450E2C} Adobe Photoshop CS6 Danish Language Pack_13.0.2_AdobePhotoshop13-da_DK 13.0.2.0 requires a parent with following specification: Family: Photoshop ProductName: Adobe Photoshop CS6 Danish Language Pack_AdobePhotoshop13-da_DK MinVersion: 0.0.0.0 This parent relationship is not satisfied, because this payload is not present in this session. This payload will be ignored in this session.
I tried to install the newest Photoshop update, but I get an error code: "Photoshop CS6 13.0.1.1 update error U44M2P7", and there is no information about it on Adobe's Help sections
I have tried updating Photoshop CS6 three times now and have gotten this message each time:
Of course there is no record of this error code online. I have installed and RE-installed CS6 and fussed with all of the font issues. My photoshop STILL will not update and STILL crashes on a whim whenever it feels like it.
When I updated Photoshop CS6 with the 1st update, I began to get a error message "Could not complete due to a program error". I also lost the ability to perform photomerges. Everytime I do a photomerge, I get an error message that says that "the functionality does not exist in this program". I use the photomerge frequently.
I've applied the Mac Photoshop CS6 13.0.2 update this morning, but now, I cannot open one of my working .psd document anymore, Photoshop raises a "could not complete your request because of a program error" message everytime. I've tried to open it on another workstation, a Windows one, running Photoshop CS5 12.0.4, and it's okay, meaning that my .psd file is not corrupted.
I've tried to disable Photoshop extensions from the extensions manager, but problem persists.
I'm getting an error (U44M1|208) everytime I try and update Camera Raw from Application Manager. The error occurs after downloading and during installation. I've attempted several times in several different ways :
I'm also getting an error (U44M2P7) when I attempt to install from the manual installation DMG:
I've also tried updating from within Photoshop via Help > Updates... and get Error Code: U44M1P7.
I get an error message when I try to update the Raw 7.3 update for Premiere Elements 11 and photoshop Elements. It says to run support adviser which I did, but it says that it could not detect any problems.
I tried to install the update with Adobe Updater and it failed with error code U44M1P7.I then downloaded the update patcht directly from the site and tried to install. Again error code this time U44M2P7.
I updated my CS5.1 to 64bit when I upgraded my OS to Win 7. Now when I check for updates I get an error message U41M1C212 - server isn't responding. I checked firewalls and IE settings - both seem ok. I downloaded the latest update plugin but I get a message that mine is newer (and bigger) than it.
Downloaded and attempted to install 4.4 on Windows 7 64x machine.
Received error "shortcut not found" and instruction to see if the shortcut was still there.
Cancelled install.
Went to look for shortcut ... which was there.
Clicking on the shortcut results in error:"The item "lightroom.exe" that this shortcut refers to has been changed or moved, so the shortcut will no longer work properly."
LR 4.2 was working fine. I was just getting tired of the constant reminders to update.
I am tryng to upgrade from LT 2009 to LT 2012 and recieve this message "annot update some system component now. Please reboot the machine and try again" We are running Windows Professional XP 2002 with SP3.
I have a parameters only part which drives the parts in an assembly. When I change the parameters and go back into the assembly I am getting an error. I can accept the error and drag the parts around and they snap into place, which ends the error. It works, but isn't very appealing to the eye. Is there any way to fix this?
I will create artwork in Corel Draw, save it and then export some elements out to another format.
Then I try to close the drawing and exit.
CANNOT DO EITHER.
I get an error that says 'Some of the documents could not be closed because some tasks..background. See status bar for....'
What the heck is going on here? I cannot close the file. I cannot exit the program. The only way to get out of Corel Draw is to end the program through Task Manager.
This update is bad news. I don't know how to go back to 6.1.
i just noticed that there is no manual update file for ACR 7.2. most of our company computers are offline.
how should we update them without a manual update file?
[URL]..........
adobes says the final ACR 7.2 update is available through the CS6 update.well that is of no use when you have offline computers. This update will be released as manual update file too?! any infos?
When transfering images from Lightroom to Photoshop HDR for instance. message says update Camera Raw. Update attempts all come back to 'update server is not in service' --
How do update the styles library to keep from getting the Styles Conflict error box. I have used the Standard.dwg file that loaded with Inventor 2012 but everytime I change styles and save the changes in a new template in reverts back to the library definitions.
I used to be able to select 'NO' in the LIbrary option of the Projects Folder but that optiion no longer exists.
I made a change to my materials library. I changed the color (from dark grey to light grey) of one material. I then saved this back to my library.
Now, when I start a new part, I get a warning that the material does not match the library. So, rather than using the material in the part, I opened the template and updated the material to match the library. (Manage >Update Styles).
This is where the problems come into play. In the update styles dialog, if I compare materials against my custom materials and then compare it to my Favorites, it just a continuious circle. It is like the favorites are stored inside the part and do not get updated to match the custom materials library. (I thought the whole idea behind using a library was to get the information out of the parts).
Here is a short video showing what it does. [URL] .....
The only way I can get the favorites to match is to delete the favorite material, update the style and the add the favorite back in. That is a bunch of work. The problem I got with this is that there are thousands of parts that have been created that has this favorite in it. The only way to update these is to open each part (if I knew which one), delete the favorite, update the materials and then add the favorite back in.
I'm running Photoshop Elements 5.0. Everything was working fine til this mornin. I've had the program for about a year now. When I tried to open it this morning I got this error message that popped up.
It says:
Unable to continue because of a hardware or system error. Sorry, but this error is unrecoverable.
I've tried repairing the program. That didn't work. Restarted my computer. That didn't work. Uninstalled the program and tried opening it again. That didn't work. I'm at a loss! I really need to get into my program b/c my work is there. I tried opening some of my files (they are located in my Pictures folder) and they pop up with the same message.
I am wondering if it is possible to do a style update (or style update check) upon open of a drawing?
The example would be that I have stuff made from way back that the colors/dimension sytles ect dont match the current standard and upon opening a file where they are not current, it would either prompt to update immediatly OR update automatically with no prompting (preferred method).
I am doing a massive amount of updates from old files recently and to save myself 1 - 3 clicks per drawing would be wonderful.
