I consistently receive this error at least once a week, if not daily when working in photoshop CC. Using W7-64. It is so bad that I have had to change save settings to store every 5 minutes and lose quite a bit of work.
View 1 RepliesI consistently get this crash 3-5 times a day, if not more. Happens when dragging over images from Windows Explorer and dropping into a PSD. Or if I select color picker. And random other misc. tasks that seem to trigger a crash. It's to the point where I sometimes might have 3-5 recovered PSD files.
Â
Windows 64, E5630, 8GB ram
GPU: Quadro K2000
The color of the table is almost pitch black. I have tried for the past 3 weeks to get the table lighted with incandescent, fluorescent, even LED, with 1 source of light or multiple sources, but the lighting is not consistent. I'm thinking to use 1 source of light, say top left corner, take a picture and then I need some kind of tool to read the light intensity on all points of the table and build some kind of mask. Then I can apply the mask on any of my tables and get very consistent lighting. Is this possible in Photoshop?
View 7 Replies View RelatedI want to use screenshots of websites in a web based portfolio. The images should be about 200px * 300px, or so.  I'm having a hard time producing consistent results when cropping. I can do a screen shot of the entire screen for all of the sites and change the image size. The issue with this is that the shots are so small that the detail of screenshot is lost. This creates a very low quality image.
Â
I tried to solve this by cropping the screen shot to a only feature a portion of it which would produce a more "artsy" looking image that would show the details more clearly.  It was difficult to produce images that were sized consistently. There was no way to know what the exact size of the cropped image was.
Â
Can I define a size for a mask and then apply it, or reverse it, to have a clearly defined size?
Why can't I see an applied effect all the time even while following the same steps every time?
View 5 Replies View RelatedI have noticed an inconsistancy in Photoshop with the font size. Today I created three new files, all three were 800 x 600 at 300dpi. I did my work on the images and then added titles to all three. My titles were 10pt font, Times New Roman, all with the same wording. Nothing special at all. In two of the files the font looks the same, in the third one the font is smaller even though it says it is 10pt. I saved them out as pngs and the font is noticably smaller on the one than it is on the other two. I have noticed this issue several times before but did not take the time to research. I have found nothing on this issues. I know it is not a system issues because I have seen this on different machines that I use and my coworkers have seen the same issue. It is not a version issue as it happens in CS6, CS4, and even earllier versions. It is also not limited to 10pt font, that is just what I was using in this instance. It has happened with many other sizes. I am currently using CS6 off the cloud, but I also have CS4 and the same thing happens there. The issue also appears in the CS version (yes we still have stuff that old).
Â
My PC is an Alienware M15x Windows 7 64bit
I have an image here, a product on grey seamless, and the rgb values across the seamless vary. In the top left the rgb values are around 200 - 208, in the bottom right the values are around 160 - 180. I need to make the values of the background close to consistent all around, however without just painting in a solid grey. There needs to remain some texture of the actual seamless. The result should be like the second image. Is there a way to achieve this fairly quickly and easily?
View 4 Replies View RelatedI find that when i am working on a file and try to save as web, the colour on my screen is lighter than the colour that the image has when i am on the saving as web window. How do i get to have a consistent color in both my on screen image and the one i am saving?
This is specially true for photos, they look pale and skin tones are dull. I want images to have the windows RGB profile even when i am saving them as web images.
I made lots of gifs a year ago, the problem is now I want to edit them, but in order to do so I will have to degrade quality futher as I will have to work directly on these gifs.
I want to prevent this from happening in the future, is there any convenient way to save frames that will compose the gif as well as the text elements in a consistent format that will ensure the quality?
I already tried to save into a PSD file, unfortunately it appaears that the frames are not included into the PSD file, they stay in the original folder.
My method is Open > Image sequence > I do what I have to do > Save as...
Im using photoshop 6, and Im trying to apply an effect for a banner photo, that will be consistent for other banner photos of the same size.As you can see the gradient (which contains the text) starts with a grey color then transitions to white. The right edge that meets the blue sky isnt a hard edge but rather a soft edge.
Im not sure how to create that soft edge. I used a brush in this case, and as you can see, the line is uneven.Also I believe the Filter used here is Ripple or Ocean Ripple.
What are the correct steps would be to create that effect, so that I can use this consistently for several photos.
I scanned a picture into photoshop at a resolution of 300. When i print it back out the colours are off and the image is kinda faded/pixely.
View 1 Replies View RelatedI've been doing a lat of conversion lately, and I'm seeing pretty inconsistent results when exportinig AutoCAD geometry through FDO into SQL Server Spatial. I'm using Map 2012 with current sps on Win 7, and SQL Server 2008 R2 - using a local instance on the same machine as AutoDCAD.. I have a large drawing (200k objects), and I have several small OD tables attached to most objects. We are pushing those into SQL Server through FDO (Export to FDO connection) and I get pretty inconsistent results on the number of objects for example, out of 788 polygons, 436 will convert. I delete the objects from SS and try again, and it usually takes at least three times for the export to be complete. It seems to be inconsistent and of course, there's no error notes thrown out anywhere. I find I have to pull counts of all the objects before starting conversion on a drawing so I can keep tabs on it.
View 2 Replies View RelatedI'm trying to create several different colored orbs that will have a consistent look using gradients. I've been playing around with Kuler and some other apps trying to pick the right shades for each orb to get a nice smooth transition, but I'm having a tough time picking the right colors for each of the gradient stops.
View 15 Replies View RelatedLightroom 4.1 / Mountain Lion
Â
Settings for Image Sizing:
Resize to fit - Long Edge - 960 pixels - 300ppi - Don´t enlarge
Â
Portrait results: Width_640 x Height_960Landscape results: Width_1440 x Height_960
Lowering ppi to 240 results in the dimensions coming out right
Â
A fellow photographer tested the same on Windows 7 and gets expected results.
Â
I saw what appears to be the same issue in a thread from april 2011, but that thread died without a solution.
Â
Is this a bug in the Mac version? Does it have to do with the ppi and is LR4.1 actually doing it right?
I have just switched to using Xara Photo and Graphic Designer 6 for my graphics design needs. Is there any way to create a default page size so that no matter when the program is opened it will always open up to that particular page size?
I am used to working and creating on a full "blank canvas" or pasteboard, rather than using page sizes that Xara seems to prefer. Every time I open the program I have to return to page options to re-set all of my workspace parameters and it gets frustrating after awhile.
For example, my preferred page settings are as follows: Page Size=A0 (which provides me all white space to work in); Outer Margin=0in [8in is always automatically pre-set by the program]; and I always choose Landscape, but the automatic pre-set is always Portrait.
There should be a way for the user to control how the workspace appears each time the program is opened, but how to make my page settings "once" and then have those settings be the default from there on out. It's just time consuming to go into Options every time I open the program and have to re-set everything all over again.
I'm having trouble with getting my polygons to be the same sizes. My units are set to inches but for some reason when I build a cylinder it is way larger than the scale of a cube, even though the x,y,z inputs are identical. Â
Â
The cube's measurements are: x 10 y 108 z 10, as are the cylinder. As you can see the cylinder is much larger.
In some drawings the viewports automatically display viewport objects when I copy them and some they do not. There must be a systems variable and I searched through the systems variable tool in the Express tools and couldn't find it. How to get consistent results when copying viewports.
View 6 Replies View RelatedEvery time I plot there is always one or two areas where the lineweights are not consistent even though all their properties are the same. I notice this especially with text. I thought erasing the heavy text and copying over the text that was printing correctly would work but stubbornly it still prints heavy. I am using a CTB to control my lineweights, the layer and colors are the same. Annotation is the same. I am working with AutoCAD Architecture 2009.
View 4 Replies View RelatedI've been having the issue with code set style and making the section view to look the way I want. I created a new code set style and it shows perfectly the way I want in the assembly. When I create the section views, I specify the sections to have the same code set style, but for some reason, it shows up in a different color.
I provided an example showing the fence line as an assembly and in section view. For "mysterious" reasons, the color is different in the section view than in the assembly. And I've checked many time in the section view properties and assembly properties to make sure that both are displaying the same code set style.
I have a stress analysis result that doesn't make sense to me. I have a flat plate, that is loaded with 100psi equally throughout the surface. I have an array of bolt holes that are 120mm x 109mm spacing. When I do the simulation and look at deflection, I see more movement on the ends. I expected the movement to be consistent eveywhere?
Is this an Inventor issue, or are my expectations in error?
On a side bar, is there a better way to constrain holes than on their edges? I would think that would give errors on the stress levels due to the point (line) contact.
Inventor 2011 Pro 64 bit
Windows XP Pro 64 bit
Dell Precision PWS390
Intel Core 2 CPU 6700 @2.66GHz
7.93 GHz Ram
ATI FireGL V7200
How to create a consistent annotation scaling of text and dimensions in a layout drawing in paperspace?
How to update dimensions/annotations scaling in modelspace to create consistant scaling of annotations for an entire drawing that has annotations that have different/inconsistent scaling (arrow size text heights all differ slightly)?
I would like to see consistent behaviour between dialogs. For me, probably the dialog that I use the most is the File >Open dialog. When I do File>Open and browse to a file, then close the file. The next time I do a File>Open, I am taken to the previous path, but the previous file is not highlighted/selected. So, I have to grab the scroll bar and pull it down to get to the file.
Now when I do a File>Open from Vault, it goes to and selects the previously opened file. This is also how Autocad works. Would be nice if Inventor worked the same way.
The above image shows my problem. All have the same zig zag effect setting, but due to inconsistent anchor point spacing there is inconsistent waviness. Is there a way to make a wavy line that is not a distortion based on anchor point distances? I'd like all my wavy lines to look nice and consistent like this:
Â
The only reason they're so consistent is the absolute setting has been used but these lines are all straight and have only 2 anchor points, start and finish, hence the wave is consistent. It's harder when the lines are curvy and have a different number and spacing of anchor points.
What is the best way to get consistent color from one monitor to another. Is that even possible?
View 6 Replies View RelatedI have many product drawings that need to have some type of identifying title (e.g., Product Name). Now that I know how to expand the canvas of the images to create enough space, I now need guidance as to how I can add a title that is consistent from image to image. I want the 'position' of the title to be as close to the same for all images (i.e., same position from bottom of image). Images are the same size for all products within a particular product line.
Â
So, I add 1" to the bottom of an image. What next?Â
I am suddenly plagued by Photoshop Crashing, for reasons not immediately understandable by moi.Here's the crash data:
Â
Log Name:Â Â Â Â Â Application
Source:Â Â Â Â Â Â Â Windows Error Reporting
Date:Â Â Â Â Â Â Â Â Â 2/24/2013 9:54:30 AM
Event ID:Â Â Â Â Â 1001
[code]...
PS CS2 just up and stopped working.
I can no longer create new images or open existing ones. Instant crash 100% of the time.
I have done everything I can think of..... including....
re-installed it.
uninstalled, then done full re-install
Uninstalled it...then...
Bought Norton, ran everything
Bought System Works, ran everything
Ran Memory & HD tests
Defragged the drive
Full re-installation......... same deal.
Core 2 Duo / XP Pro / 2GB RAM / CS2 9.0.2
Has anyone been able to figure out why PS3 crashes? I can not open it, it says Photoshop CS3 has stopped working. I have removed and reloaded the program and it still will not open. Can't keep production up with this,
View 4 Replies View RelatedIf the file size is larger than 15MB it crashes before it opens the file.I fixed this the first time by reinstalling my OS.I fixed this the second time by moving my files from their folder to the desktop then opened it from there.I can't seam to fix this for the third time and I'm soooo frustrated. It works until it crashes then it never works again.So for instance, it worked everyday for a month, then I stopped using it for a week and came back and now it keeps crashing on files over 15MB.Here's my computer set up:Win XP SP3 ProAMD Athlong 62 x2 DualCore Processor 4200+2.20GHz, 2GB of RAM1GB NVidia GeForce 9400 GT Photoshop Error Signature:AppName: photoshop.exeAppVer: 10.0.1.0ModName: bib.dllModVer: 1.2.1.1Offset: 0000c632
View 6 Replies View RelatedAm a loyal Adobe customer. Have had PS since 1997 starting with PS 4.0. Upgraded very year up to PS CS. Then my wife became ill with breast cancer (died in 2008 from it), lost my job, lost our family home to for closure in 2010, my 20 year old son diagnosed with luekemia in 2011 (still fighting on chemo) yada yada yada.
Â
Bottom line, I cannot afford to upgrade my Acrobat Pro, my Photoshop, my Premier etc etc etc.We sometimes don't have enough money to eat.
Â
So my pc crashed the the other week. I just finished rebuilding using a new hard drive, Photoshp CS in installed again, and running perfectly. BUT I keep getting a need to activate alert. And can't do it.
I trashed the prefs. Photoshop is usually bulletproof, but this is something new. What is going on? Next I will re-assign the printers.
View 5 Replies View Related