I'm trying to make a background and can't get it to where I want it. I need a black and red background blended perfectly. How do you go about blending two colors on the same background show both colors will show equally?
View 1 RepliesWhen im doing artwork in photoshop everything works fine up until I get to the point when I need to use really dark colors. Like different colors of black. When I get to this point the dark colors dont Blend well, they look like theyre displaying only a few shades of grey as opposed to many that would work for it blend better. I tried resetting my preferences and it did nothing. Im using Windows 7, Photoshop CS5.
View 1 Replies View RelatedIf you open the picture and see it u see 3 dragon heads, one white, one blue and one red.
what I am trying to do is make the centre orange and let those 3 colors blend into orange.
that's why the topic name '3 colors into 1 different color'.
I tried things with the circular flashlight effect (dont know the name of the effect)
but the goal is that only the colors change and NOT the background.
I'd like to know how do you add colors to paths. I'd also know how to make one end of a path more lighter and sharper. Also I'd like to know how to sort of blend colors into a path.
View 1 Replies View RelatedI would like to know, whether is it possible to make soft blends between all objects of the person in the art I am creating. The problem is, that I want to make very smooth transition between all paths(brush strokes) in the file. I tried the blend tool, but it didn´t work good for this purose. Then I tried to blur or feather all objects, but the result wasn´t good as well. Opacity masks would be too complicated for all those strokes. Is it possible to make this work for all brush paths in the file?
View 1 Replies View RelatedI recently installed CS5 on my laptop after first removing it from my previous machine.All licences were validated so no problems there.Now when using paint bucket in Photoshop, the colors that I select in the color picker are not the colors that result when I use the paint bucket.
If I create a new black canvas then the colors selected in color picker work with paint bucket.But if I attempt to recolor the background in an existing image that I import into Photoshop, I get the mismatch with colors when I use paint bucket. My method for selecting colors is the same in each case, I select 'set foreground color' and set the color using html values entry at the bottom of the panel.
Just wanted to print a new photo and realized that the colors in print preview do not match the colors in soft proofing. In both cases I selected the same icc profile and rendering method. The print colors matched the colors in print preview. I never had a problem so far. All new prints will be checked with soft proofing and adjusted when necessary. I never paid attention to the color rendition in print preview and all prints perfectly matched the colors from the soft proofing. I was surprised when my print came out of the printer and the colors weren't matching the soft proofing colors, but that of the print preview.
I don't understand why Photoshop renders the colors differently in the first place. See attached screenshot for the difference in the blue/cyan colors. I don't care if the print view colors will match the print, but I do care when soft proofing is not working.
The colors of pictures is much darker when working in photoshop than when I open it normally. And vice versa, I work on images inside photoshop, and I get the colors I want, but once I save it to bmp or jpg or anything else, all the colors are much lighter.
i'm using photoshop 7.
CDX5: Whatever color I select for fill or outline is now set as the default color for fills and outlines without expressly setting it as such. Until now when I left or right click a color with nothing selected it allowed me to set it as a default fill or outline color for graphics, artistic text, or paragraph text. It does not do that now.
Is this a "feature" that's been added that I somehow enabled? In any event, how do I turn it off?
We are working with a company that will be sending us DWG files. They do not use the same layer colors as us and I am trying to find a lisp that would allow me to set up a table with the layer names and the color I want them to be so that I can quickly change all the layers to our companys color standards.
Example:
Layer 1 = Color 1
Layer 2 = Color 15
Layer 3 = Color 10
Etc.
I don't know a lot about lisp but I figure if I could find a lisp that did this I could plug in my layer/color assignments and it would work.
Using CS6 on a MacBookPro Is there a way to find the closest matching Pantone spot colors to the cmyk colors I've created in Illustrator? I know it's easy in Photoshop using the color picker, but there must be a way to do this in Illustrator.
View 4 Replies View RelatedYou can see in the attached screen cap that colors 1-9 appear as white on my screen and that colors 10-22 are not correct either. This is only occuring in one specific drawing. Is there a preference that I switched somewhere that would make this happen? I have double checked that everything is ByLayer or ByColor that I can think of. If I insert this color chart into other drawings it looks fine. using C3D 2012.
I would just restart my drawing, however it is the new company template file that I have invested many hours into and would really like to be able to keep working with it and not start over. Or is there a good way to import and overwrite all the Prospector settings into a blank drawing?
You can see in the attached screen cap that colors 1-9 appear as white on my screen and that colors 10-22 are not correct either. This is only occuring in one specific drawing. Is there a preference that I switched somewhere that would make this happen? I have double checked that everything is ByLayer or ByColor that I can think of. If I insert this color chart into other drawings it looks fine. using C3D 2012.
I would just restart my drawing, however it is the new company template file that I have invested many hours into and would really like to be able to keep working with it and not start over. Or is there a good way to import and overwrite all the Prospector settings into a blank drawing?
I'm working on this illustration and can't figure out how to do what I'm thinking. Looking at the attached image, the two colors signify the shallow outer edge of the pond and the darker part is the deep section. What would be the best way to blend them together? If the pond was round or at least square I could use a gradient, but that doesn't work in this case (at least using my limited knowledge). I'm using PS7 by the way.
View 2 Replies View RelatedI have an image I wish to extend from width 800px to width 1024px and possibly beyond this width. I would like to extend the grass on either side of the image to get the required width but Im not sure how to blend the grass to make the image look like a natural shot, how can this be achieved or can anyone help?
View 2 Replies View Relatedway to cut out my pics and blend them together.
I currently use the magnetic lasso and then feather it to 1.
I'm trying to blend a skin tone. Basically I have this picture of me and my friend, but somehow the film or something got screwed up and threw this white smudge/ color deformation on my face. I want to take it out and blend my skin color over it. I guess it would be just like replacing a bird in the sky, with the sky... if that makes sense. Im sure its easy, im just half way retarded. I tried searching the forum first and I tried some of the tips, but for some reason, I just cant get it to work.
View 6 Replies View RelatedI recently downloaded the trial version of Photoshop Cs5. I haven't had many problems and I like it a lot except for ONE thing! I cannot figure out how to blend layers! When I upload my first layer (my image) it shows in the layers palette. But when I upload my second layer (texture) it not only jumps on top of my first layer in the layers palette, but it ALSO jumps on top of my first layer (the image) in the work area. I have watched a lot of the Photoshop tutorials and I've noticed that when they upload their second layer it shows SEPARATELY from the first image in the work area.
They then click on the second layer and drag it over onto the first layer and then they are ready to start working on blending. For the fact that my second layer jumps on top of my first layer in the work area like it does, I am not able to follow along with the tutorials! I have also tried and tried to figure out how to manage to blend by trying lots of techniques and options in the program but nothing will work.
I use textures and depend on blending A LOT with my editing so this has been very discouraging! I have used other editing programs and usually with them, after you duplicate your first layer and then upload another you are able to blend with no problem. So I do not understand this at all! You can even blend with no problem by duplicating your first layer in Photoshop Elements 10.
I need to make a picture of a person's face blend seamlessly into the sky. The below shows you what I mean. At the moment the Kenyan Warrior's face has harsh edges and doesn't look properly blended in. My very limited Photoshop ability had me placing an inner glow and bevel and gloss to get something close to what I want, however I suspect the real tool I need for this is completely unknown to me!
View 2 Replies View RelatedI have Photoshop CS6, and I just got a Windows 8 computer a couple days ago. I just now have realized that the Screen and Linear Dodge (Add) blending modes are not working at all. They have no effect on my layers. I know that the Overlay blending mode works... I haven't tested all of them.
I understand that others are having problems with Photoshop and Windows 8. Is this a related problem, or is it unrelated and is it something that needs to somehow be fixed?
We just upgraded at work to CS6 and overlay blending isn't working like it did in CS5.
Overlay used to multiply values below 50% and add screen above 50% regardless of what the layer underneath looked like. I'm not sure what's going on now.
Am I the only one seeing this? Is there a setting somewhere to get it back to working the way it was? I haven't seen any documentation on the change and a search of the support shows no one else complaining about the same issue. But me and my coworkers are all seeing the same issue.
i can do only the basic simple stuff-like painting..lol). anyway, iwant to blend two images. so..how to do it or, how can i put another picture to a new layer(only the image i opened showed up in layers and i dont know how to put anotherone in the layers).
View 1 Replies View Relatedhow blend the various photos/images. I bought one to see if I could figure it out. There are 2 layers, each with an image. They seem to overlay the images, and the bottom image seems to have a transparency to it, but the opacity is still 100. How can I get 2 images to blend cleanly into one another?
View 2 Replies View RelatedI am just trying something out on Photoshop and for some reason am not getting the expected result. I have added a new blank layer to an image and have changed the mode to Color. Now I have changed my brush size and colour but when I start to paint my new colour onto the layer I dont see the brush stokes on the background image... If I just very the new layer I can see the strokes but they are not showing up on the background.
View 2 Replies View Relatedif you had 2 pics next to each other and blending them into each other. Some say to user layer masks and a brush, others say they use erasers and fading.
View 2 Replies View Relatedhow to blend in the image so the contrast is smooth (even).
View 2 Replies View Relatedhow can i make lets say, a jpg image, not the best quality, and use it as my backghround layer. then i want to add a flame onto it. how do i make the second layer (flame) the same i dont know, contrast? or quality. so it looks real?
View 2 Replies View RelatedI have a logo I've created with various blending styles and gradients on different layers which is all set on a gradient bg layer that is a clip of the bg from the website I eventually want to put the logo on. I hope that made sense. Anyways, I want to save my final product (as a png) without my background layer, so the bg is just transparent. However, many of the colors in my blended layer and gradients get messed up when I remove the background layer. Is there any way to remove the background without messing up blending and gradients?
I tried merging my layers and converting them to a smart object, but it still messed up colors/gradients.
I am having a slight issue on how to blend the girls hair more properly into the background so it doesn't stick out as badly. I have attempted a few careful options with a soft brush and lightening it but it is not coming out the way I want, Any ideas?
View 9 Replies View RelatedDoes one of you know how to make the edges of the mouth image and the papersquares that form a K 'flow' into/transition into the background?
View 4 Replies View Relatedi'm an art student and have been for over 3 years now, i did a degreee in arts and technology , and they made us use Corel Painter most of the time , and a bit of photoshop as well...
so basically i'm used to painters tools , specially with the blending tools, where you have choice between smudge, blur, stomp, smear, blend...etc
I have tried to find similar tools in photoshop , but couldnt find anything close to it ( so far the water drop and the correction tool).