I have 20+ layers that all need the same levels adjustment, so I put them in a group, and applied a Levels Adjustment Layer to the group.
Is there a way to bake that adjustment in to every individual layer, while retaining them as separate layers?
I'm doing an animation for a progress indicator. Basically I have a set of 72 spokes, and I'm using sub-set of these spokes with varying transparency to show the underlying gray layer through.
I've seperated each spoke into 72 different layers, and I'm then manually adjusting each one for each frame.
The effect works great, but I've decided that I would like to apply an adjustment to all of the spokes to adjust their color balance. I've got an adjustment layer, but this is affecting my gray layer underneath.
I've tried layer sets, linking layers and grouping, but none seem to allow me to apply an adjustment to a group of layers. I'm using Photoshop 7.
Is there any way to "clip" an adjustment layer to a layer group?
If I have ten layers grouped and want to correct all their curves alltogether -
how can I do that (without merging down the group and without affecting the layers underneath, of course)?
i have photoshop project containing several groups with also groups in it. is it possible to create an adjustment layer just for one single group? cant figure it out
View 1 Replies View RelatedThe Photoshop CS6 Info Palette is not showing before and after in Grouped Adjustment Layers. It only shows the after values on both sides of the Palette.
The two macs with this problem are:
Mac Pro
2 x 2.93 Ghz 6-Core intel Xeon
96 GB 1333 HZ DDR3 ECC
ATI Radeon HD 5770 1024 MB
OSX Lion 10.7.5
The two macs that work correctly are:
Mac Pro
2 x 3.06 Ghz 6-Core Intel Xeon
96 GB 1333 HZ DDR3 ECC
ATI Radeon HD 5870 1024 MB
OSX Lion 10.7.5
I am working with a lot of layers in PS and frequently I need certain adjustments to affect each transparent layer in the group without affecting any groups underneath. Is there a way to do so without resorting to masks? In other words is there a way to group adjustments with particular groups rather than with particular layers?
View 9 Replies View RelatedHow do I create layers in an adjustment layer and transfer or duplicate those layers in another image ?
I need to transfer the same colour readjustment from one image to several other images ... I have been told to do this in the adjustment layer platform how ever I cannot drag or copy those layers over to the other images I have open and in need of adjustment to the same layers ...
Images shows my layout and what i've done this far
I ran to a little trouble using photoshop today. I wanted to get rid of the "adjustment layer" but leave the effects.
For example:
I have two layers and I want to apply the adjustment layer effect to them. I don't want to leave that "adjustment layer" on top of everyone. I can't use groups because my real project is too complicated. By the way, applying the adjustment layer to all of them means all the layers remain an image but they have been modified (for example: color, black and white, etc.).
I am wondering if there is a way to create an adjustment layer that only affects two layers that are spread apart. What I'd like to be able to do is change the color of both layers at the same time.
The problem is, I can't group the layers together and add an adjustment to the group because one of the layers (Number Color Flare) has to stay on top of the rest.
I would like to add an adjustment layer to a photoshop CS2 file that has an effect on a particular layer rather than all of the layers. I have tried adding the adjustment layer from the icon at the bottom of the layers palette, from Layers, New adjustment layer, and I have also tried linking the two layers. In all cases the adjustment made applies to the whole image. I am sure that previous versions of Photoshop had this facility.
View 6 Replies View RelatedOne thing I have never understood is: why use layer masks and adjustment layers, instead of simply creating a copy of the subject layer (the one I want to make changes to) and experimenting with that? It's quick (Ctrl-J), I can do it as many times as I want, I'm not affecting my Background layer. If I like the changes, I can keep them. I can switch the copy on and off to compare with the Background layer. I can do any type of blend or combination I desire. I can insert Gradient layer(s), select any part of the copy and (Ctrl-J) create a new layer containing only the selected part. I can adjust size, rotate, do anything.
It almost seems that "layer mask" and "adjustment layer" are mainly another layer of terminology; how they are intrinsically different from or superior to working with copies of the Background layer?
I scanned a drawing I made as a .jpeg, opened it in PS CS4, converted the background to a layer, added a curves adjustment layer, and when I try any of Flatten Image or Save as Jpeg the results disregards all or part of the effects of the adjustment layer. The same happens for a levels adjustment layer . I have attached the original jpeg and the .psd with the curves adjustment layer.
View 1 Replies View RelatedA Group in NORMAL mode containing a NEUTRAL OVERLAY layer blocks all the layers below and outside the Group with a solid grey color.
View 18 Replies View RelatedIm trying to create a logo. I grouped a bottom layer of shapes to form one shape. I also group three letter together. When i put the group of letter on top of the group of shapes it looked great. Then i tried to group this bottom and top layer together and lost the top layer of letters...how can i stop this from happening?
View 3 Replies View RelatedHow do I move more than one layer into a layer group at a time?
View 2 Replies View RelatedWhy my AutoCad 2009 will not let me select new layers to a specific group layer filter. It was working just fine and yesterday all of sudden it will not let me add new layers to a specific filter. Is there a button or command that maybe would have changed that function. Everything else seems to be working on the Layer Manager.
View 3 Replies View RelatedI use a lot of Group Layer Filters so I can turn things on/off quickly. My problem is I have been creating my Layer Filter Group by right clicking on the Layer Group Filter>going to Selection>then click Add> then go back to my drawing or Layout tab and select all of the layers I need then click enter. One day my AutoCad would not let me do that anymore, and even after I click on enter it gives me an error message saying the command is still active. Now from my Layer Properties Manager I can select any layer and drag/drop it into any filter and it works, but I really need to be able to select things within the model space or paper of each layout tabs.
View 0 Replies View RelatedNote Layer > Duplicate will not work in this regard, because I want to copy one group of paths/elements from one layer to other existing layers, not to a new layer.
I have not found a command for this, nor have I found any scripts. Note I'm using CS3 but have been thinking about an upgrade.
How to Apply adjustment layers to multiple layers that have different blending modes and keep the colors the same as the adjustment done?
I work in Animation painting Backgrounds. My files are sometimes upwards to 200+ layers.I will use adjustment layers to quickly balance colours and constrast on top of those many many layers.
The only way that I know of how to apply adjustment layers it to every single layer ( by applying I mean I need to get rid of the adjustment layers because we cant use them in production but i need the new colours be applied to all layers underneath ) in a psd is to manually do it By duplicating the adjusment layer 200+ times and then merging each layer to one of those adjustment layers so that that layer can take the adjustment layers effect permanently.
The issue is that Within Those 200 layers I have some layers set to Multiply or OVERLAY. IT obviously wont apply the adjustment layer properly to those layers because those layer blend mode affect the layers under them. The colour wont be the same anymore in the spots that had the multiply blended mode.
[URL]
I have 2 adjustment layers up top. I need to get rid of them by applying them to each layer! I cannot merge any of the layers. We need all those layers for production.I can apply the adjustment layers manually and this works GREAT for all Layers set to normal. THey take on the colour change just FINE.
However, The issue is that layer 6 and layer 4 are both set to mutiply and this screws up the colour once i apply the adjustment layers to each layer manually...
How can i apply my adjustment layers to a file like this with some layers being set to multiply while keeping the layers exactly the same configuration and The new colour taking effect exactly how i looks before i apply the adjustment layers? Now the simple solution is to merge the multiply layers to the layer that it affects HOWEVER I NEED those multiply layers to be separate!
I want to add the same 3 adjustment layers to about 20 photos and then in scripts, export layers to files, so that each photo includes the adjustments.
View 6 Replies View RelatedI have now exactly the same problem as below with over 1000 images, I have saved them in .psd that has over 100 layers each. On top of those there is curves and levels layer that affects every layer below. I want to save all images to .jpg for videoedit with those curves at least. I don't want to merge same curves 100 times. Is there a solution in phothoshop cs5 or cs6 available? Would save alot of working hours. All I have got by this far is blank white images of adjustment layers and non adjusted jpg-files.
This discussion was opened in 2010 and I quess this is same problem:
"
How to merge adjustment layers to hundreds of layers?
Jul 28, 2010 10:38 AMSay I have a photoshop File with 100 layers.
And say I created 3 adjustment layers on top of those 100 layers to get the adjustments that i want for those layers. I'm happy with the adjustments but Then I NEED to merge those 3 adjustment layers to ALL those 100 layers.
Is there a way to easily permanently apply the adjustments to each of those layers without having to do it manually? I absolutely need to merge the adjustments to the seperate layers because of how the layers are being used in a seperate 3d program.
So far what I've been doing is duplicating the adjustment layers for each layer and merging them to said layers separately.. I wish I could just right click the adjustment layer and Tell it to merge to everylayer it affects or apply to every layer underneath it!
I need to merge 2 adjustment layers with 2 image layers. When I do, the look changes. Are there ways to do this without changing the look? I have attached a screen capture of the layers affected. Additionally the "Stars" layer has a "Screen" blend mode. This is on a Mac.
View 2 Replies View RelatedWhat I want to do is to have an adjustment layer that is a reversed, black and white image. I initially thought to merge B&W and reverse adjustment layers, but read that an adjustment layer may not be the target of a merge. Is the way to accomplish this to fiddle with the B&W adjustment layer sliders somehow?
I like how the black and white displayed image of a given color channel looks, how can I export that channel into a layer?
I use a lot of adjustment layers and they're often applied to the previous layer. Is there a keyboard shortcut to automatically "Use pervious layer as clipping mask" without going through the dialogue box or manually applying in the layers palette(Option-click between layers)?
View 5 Replies View RelatedIf I make an Adjustment Layer, I notice that it effects EVERY layer underneath it. Is the only way to apply that adjustment layer to layers you WANT is to drag those layers under the adjustment, and then hold ALT and click the line BETWEEN the adjustment layer and the layer you want affected, thus making it a "Clipping?" layer?
View 7 Replies View RelatedI'm familiar with adjustment layers and clipping masks, but am wondering if there's a way to have an adjustment layer affect a group of layers below it, but not all of them. (Usually you have a choice of having it affect either JUST the layer beneath it (through a clipping mask), or ALL of the layers beneath it.
View 5 Replies View RelatedSome of the options in Layer>New Adjustment Layer are gray.
I don't know why I can't click them. I need to use Color Balance.
Using Photoshop CS.
When you open an image with adjustment layers, what determines what is selected, the background or the adjustment layer? It seems sometimes it's one or the other, and I don't know the logic. Personally I would prefer that the image always opens with the background layer selected.
View 5 Replies View RelatedI'm new to Paint shop. Is it possible to clip an adjustment layer or image to just the layer below it like in Photoshop? Or maybe Paint shop calls it something else?
View 14 Replies View RelatedA drawing with hundreds of layers should be simplified for our customer by decreasing the numbers of and renaming the layers (there is yet no target file existing). In order to solve this, I generated group filters and assigned every single layer to them (all printing properties are assigned to objects). The layer groups show the desired layer structure after the transformation (still a three-digit number).
Unfortunately, the LAYTRANS dialog doesn't let me choose layers by group filters or remarks. It seems as all the work was for the birds.
Is there any way to translate my layers using filters or remarks?
I use AutoCAD Civil 3D 2010.
I'm trying to write a script that renames a layer, and group within the layer, then an object within the layer (but not a part of the group) and have it run in a loop.
Here's what I've got so far, the group rename doesn't work.
#target Illustrator
var doc = app.activeDocument;
idLayers(doc)//IRename layers
idGroups(doc)//Rename groups
function idLayers(doc){
[code]....
I haven't put in anthing to rename the single object yet since I cant even get the group rename to work. I suspect that the group re-name section isn't working because I'm either using bad syntax or an invalid command.