Is there any way to "clip" an adjustment layer to a layer group?
If I have ten layers grouped and want to correct all their curves alltogether -
how can I do that (without merging down the group and without affecting the layers underneath, of course)?
In PS cs6 i cant find how to create clipping path for layer group (apply to folder from some shape layer with alt + drag&drop) created with pen, rectangle etc tools. Here is how it should look in cs6 but i don't know how to do that ?
View 5 Replies View RelatedA non-Group layer can be clipped to an underlying Group, but I was surprised to find that the inverse relationship, i.e. a Group clipped to an underlying layer, is not possible. A workaround is to convert Group to Smart Object then clip the SO to the underlying layer.
Enable clipping of Group to underlying layer.
i have photoshop project containing several groups with also groups in it. is it possible to create an adjustment layer just for one single group? cant figure it out
View 1 Replies View RelatedThe Photoshop CS6 Info Palette is not showing before and after in Grouped Adjustment Layers. It only shows the after values on both sides of the Palette.
The two macs with this problem are:
Mac Pro
2 x 2.93 Ghz 6-Core intel Xeon
96 GB 1333 HZ DDR3 ECC
ATI Radeon HD 5770 1024 MB
OSX Lion 10.7.5
The two macs that work correctly are:
Mac Pro
2 x 3.06 Ghz 6-Core Intel Xeon
96 GB 1333 HZ DDR3 ECC
ATI Radeon HD 5870 1024 MB
OSX Lion 10.7.5
I have 20+ layers that all need the same levels adjustment, so I put them in a group, and applied a Levels Adjustment Layer to the group.
Is there a way to bake that adjustment in to every individual layer, while retaining them as separate layers?
I am working with a lot of layers in PS and frequently I need certain adjustments to affect each transparent layer in the group without affecting any groups underneath. Is there a way to do so without resorting to masks? In other words is there a way to group adjustments with particular groups rather than with particular layers?
View 9 Replies View RelatedI found out that there is a way to show clipping areas in Photoshop when adjusting levels via an adjustment layer. While moving the slider, you hold down the ALT key.
I tried this in PSP X3 and it does not work. Any feature for seeing the clipping preview is available in Paint Shop Pro? It's a nice feature.
Basically I have a background layer and group with 5 layers inside. I want to set an adjustment as a clipping mask to affect the whole group but I don't want it to affect the background layer. Is there a way to create a clipping mask for a group, so that just the layer within this group are affected and not the background layer?
View 2 Replies View RelatedIm trying to clip a bunch of layers, based on a shape with no fill, just the path basically...
So I think I need to group the layers and mask the group right?
So I put all the layers in a group..and then click the little white cirkel in a grey rectangle at the bottom right? And then what? If I alt click that white square that appears next to my group layer.. I can edit it.. should I put my clipping shape there? cause that still doesnt clip anything and I cant adjust the fill either..
I am having an issue with clipping masks only affecting the intended layer no matter what color background I have on.
For example - I have some lettering that I want to apply a gradient map adjustment layer on. In order to only affect the type layer I hover between the adjustment layer and the type layer while holding Option + click to get the double b+w circles to clip it.
When I clip my ad layer, I don't get my effect. The only way I see the adjustment gradient effect is if I unclip my adjustment layer, but then this affects my ENTIRE background rather than just the type.
Is there a trick to keep the adjustment effect without affecting the rest of the layers no matter what color background I have? Adjustment gradients seem to work best on black backgrounds only. The problem is that my original document has a red background so I HAVE to clip it in order for the gradient not to affect my red background. But even on a black background, I have to unclip the ad layer to see the effect. This is weird.
I could flatten my document and extract my type with all its effect glory and just import it into my original doc, but selecting and extracting blurred type would be a big slap on the head.
way to create a clipping mask for a group (folder)?
It seems I can only create them for single layers, but not for a whole grouped bunch of layers...
I'm doing an animation for a progress indicator. Basically I have a set of 72 spokes, and I'm using sub-set of these spokes with varying transparency to show the underlying gray layer through.
I've seperated each spoke into 72 different layers, and I'm then manually adjusting each one for each frame.
The effect works great, but I've decided that I would like to apply an adjustment to all of the spokes to adjust their color balance. I've got an adjustment layer, but this is affecting my gray layer underneath.
I've tried layer sets, linking layers and grouping, but none seem to allow me to apply an adjustment to a group of layers. I'm using Photoshop 7.
I'm using a clipping mask on a layer. The base layer that the clipping mask is referencing has a layer effect applied (in this case an inner shadow). I want to make it so the layer effect is only applied to the base layer and NOT the clipped layers.
Below is an example of what I'm talking about. as you can see, layer 1 has the base layer's inner shadow applied to it. I want the inner shadow to be hidden by Layer 1, but the clipping mask to still apply.
I'm trying to clip a layer onto another layer that contains styles. Whenever I do this though, the layer I'm clipping appears to disappear. My guess is that it's inheriting the styles from the layer it's being clipping onto, and so it's indistinguishable.
So my question is how can I clip onto a layer with styles, but not inherit? I can't seem to find any 'clipping layer properties' kind of thing, or anything that allows me to specify it
What I want to do is to have an adjustment layer that is a reversed, black and white image. I initially thought to merge B&W and reverse adjustment layers, but read that an adjustment layer may not be the target of a merge. Is the way to accomplish this to fiddle with the B&W adjustment layer sliders somehow?
I like how the black and white displayed image of a given color channel looks, how can I export that channel into a layer?
I use a lot of adjustment layers and they're often applied to the previous layer. Is there a keyboard shortcut to automatically "Use pervious layer as clipping mask" without going through the dialogue box or manually applying in the layers palette(Option-click between layers)?
View 5 Replies View RelatedI'm familiar with adjustment layers and clipping masks, but am wondering if there's a way to have an adjustment layer affect a group of layers below it, but not all of them. (Usually you have a choice of having it affect either JUST the layer beneath it (through a clipping mask), or ALL of the layers beneath it.
View 5 Replies View RelatedSome of the options in Layer>New Adjustment Layer are gray.
I don't know why I can't click them. I need to use Color Balance.
Using Photoshop CS.
When you open an image with adjustment layers, what determines what is selected, the background or the adjustment layer? It seems sometimes it's one or the other, and I don't know the logic. Personally I would prefer that the image always opens with the background layer selected.
View 5 Replies View RelatedIn CS6, the clipping mask is just an icon in the lower right of the layer icon in the palette. How do I easily drag it to another layer to create the same clipping mask? In previous Photoshops, you could option drag it to other layers/folder to quickly add the masks.
View 2 Replies View RelatedI'm new to Paint shop. Is it possible to clip an adjustment layer or image to just the layer below it like in Photoshop? Or maybe Paint shop calls it something else?
View 14 Replies View RelatedA drawing with hundreds of layers should be simplified for our customer by decreasing the numbers of and renaming the layers (there is yet no target file existing). In order to solve this, I generated group filters and assigned every single layer to them (all printing properties are assigned to objects). The layer groups show the desired layer structure after the transformation (still a three-digit number).
Unfortunately, the LAYTRANS dialog doesn't let me choose layers by group filters or remarks. It seems as all the work was for the birds.
Is there any way to translate my layers using filters or remarks?
I use AutoCAD Civil 3D 2010.
I'm trying to write a script that renames a layer, and group within the layer, then an object within the layer (but not a part of the group) and have it run in a loop.
Here's what I've got so far, the group rename doesn't work.
#target Illustrator
var doc = app.activeDocument;
idLayers(doc)//IRename layers
idGroups(doc)//Rename groups
function idLayers(doc){
[code]....
I haven't put in anthing to rename the single object yet since I cant even get the group rename to work. I suspect that the group re-name section isn't working because I'm either using bad syntax or an invalid command.
It seems that it not able to make several paths on a single layer and then turn each path into it's own "clipping path " rather than just an outline path...Is this correct or am I doing something wrong ? I have 3 pieces of silverware on a background and want to outline each one separately then turn that path into a clipping path to move it to another file...I am able to make any one of them a clipping path , but not the others.
View 2 Replies View RelatedI have two layers. The lower layer is text. The upper layer is a pattern. I want to show the pattern on the text only, but do not want to show any of the text color (pattern is black, so is text). How can I accomlish this?
Currently I tried to apply the text layer as a clipping mask for the pattern layer but the text color shows through.
Why can't I align a single layer that is inside a layer group? The align tool would always select the top most layer group as the 'boundary' for alignment, thus automatically selecting the whole layers inside of it and align them as a group.
Is this a bug or just GIMP's weakness? It definitely reduces the layer group's usefulness.
MacBook Pro OS 10.7.4
Photoshop 6
Memory 8 GB 1333 MHz DDR3
Graphics Intel HD Graphics 3000 512 MB
603 GB available
I have recently had to begin using Clipping Paths for knockouts and silo's. I am having trouble though with moving the layer that has been knocked out and the clipping path that 'corresponds' to that layer.
What I want to know is if I can move them and size them together and still retain a clipping path? Every time I transform the layer and have the clipping path selected it only affects the clipping path. If I deselect the clipping path and transform it only affects the layer. The clipping path just stays where it is and I would have to move it independently of the layer to realign it.
Sometimes I want to re-orient the layer from vertical to diagonal on the white background but that will unalign it from the clipping path.
I am struggling with clipping masks and after a few hours of scouring the internet and trying different techniques, I am left no closer to my end result than from when I started.
I am creating a banner. The banner contains 1 background image and some text. I'd also like to include 9 photos on top of the background image, all bound by a textured border. I have created the borders for all 9 images and have placed them on the background. Now, my questions is how I make these base layers of a clipping mask. I want the the mask to show the image, even through some of the textured border.
I know how to create the actual clipping mask of the image to be placed in the border. My question lies entirely within the base layer/border layer.
I'm working in Photoshop CS5. I have several layers, and only want to make an adjustment to the top layer. I don't have an clip icon on the bottom of the layers pallete either, what should I do...
View 4 Replies View RelatedI want to add an new adjustment layer to a layer but not have it affect the layers below it?
View 4 Replies View Related