Im trying to create a logo. I grouped a bottom layer of shapes to form one shape. I also group three letter together. When i put the group of letter on top of the group of shapes it looked great. Then i tried to group this bottom and top layer together and lost the top layer of letters...how can i stop this from happening?
View 3 RepliesNote Layer > Duplicate will not work in this regard, because I want to copy one group of paths/elements from one layer to other existing layers, not to a new layer.
I have not found a command for this, nor have I found any scripts. Note I'm using CS3 but have been thinking about an upgrade.
I'm trying to save a file that looks great in Photoshop and preserve it as a PNG. I'll create the image, simply "merge layers" and lose the transparency of it. How do I get my PNG to look like it does in photoshop.
The red background show through in photoshop originally...but then after "merge layers" or saving the PNG every way possible (or so I think)... the degree of transparency isn't preserved.Below looks great. (red bleeds through nicely, good transparency)
Now doesn't look so good. (all i did was merge layers and red doesn't bleed through properly anymore, same result when saving as png)
I have 20+ layers that all need the same levels adjustment, so I put them in a group, and applied a Levels Adjustment Layer to the group.
Is there a way to bake that adjustment in to every individual layer, while retaining them as separate layers?
How do I move more than one layer into a layer group at a time?
View 2 Replies View RelatedIf CC is a TRIAL program, why would you allow it to blow away layers and groupings when the doc is reopened in CS6? No I have to resinstall CC, open the doc, save it back down to CS6, and PRAY that the layers and groupings are intact. What a waste of my time.
View 2 Replies View RelatedHow can I back save illustrator files created in CC (CS7 version???) to CS6 without losing layers? when I open the files in CS6 it says "some info will be lost' Ha! all layers and separation is lost, so cannot separate parts whole file seems grouped and cannot be separated? When I go back to my (other) computer where I was foolish enough to upgrade to CC, way to save back as I can with InDesign and saving as a idml file.
View 6 Replies View RelatedI'm trying to write a script that renames a layer, and group within the layer, then an object within the layer (but not a part of the group) and have it run in a loop.
Here's what I've got so far, the group rename doesn't work.
#target Illustrator
var doc = app.activeDocument;
idLayers(doc)//IRename layers
idGroups(doc)//Rename groups
function idLayers(doc){
[code]....
I haven't put in anthing to rename the single object yet since I cant even get the group rename to work. I suspect that the group re-name section isn't working because I'm either using bad syntax or an invalid command.
A Group in NORMAL mode containing a NEUTRAL OVERLAY layer blocks all the layers below and outside the Group with a solid grey color.
View 18 Replies View RelatedWhy my AutoCad 2009 will not let me select new layers to a specific group layer filter. It was working just fine and yesterday all of sudden it will not let me add new layers to a specific filter. Is there a button or command that maybe would have changed that function. Everything else seems to be working on the Layer Manager.
View 3 Replies View RelatedI use a lot of Group Layer Filters so I can turn things on/off quickly. My problem is I have been creating my Layer Filter Group by right clicking on the Layer Group Filter>going to Selection>then click Add> then go back to my drawing or Layout tab and select all of the layers I need then click enter. One day my AutoCad would not let me do that anymore, and even after I click on enter it gives me an error message saying the command is still active. Now from my Layer Properties Manager I can select any layer and drag/drop it into any filter and it works, but I really need to be able to select things within the model space or paper of each layout tabs.
View 0 Replies View RelatedAs you can see in the example images of the monkey, each part of him is organized in different layer groups. Head, body, arms, and feet. The first image shows that his entire right arm is grouped but cannot be selected as a whole. Instead, only a path from the arm is selected.
The second image shows that the entire left arm is grouped and IS able to be selected as a whole. They're both set up the same way, so what's different between the two?
I have a layer that contains two clipping groups (groups with a clip mask and other art). When I call layer.groupItems it returns an empty array. When I call layer.layers it returns the two clipping groups. I need to know if these layers are clipping groups, but if they are coming back as layers how can I figure that out?
View 8 Replies View RelatedI've many layers with sub-layers in it. The problem: All layers (containing sub-layers) are shown opened in the layer pallette on document opening. How can I convert a layer into a simple group preserving the name? Are there a (semi-)automatic approach to convert all sub-layers into groups?
View 9 Replies View RelatedI am using Illustrator CS6 and followed a tutorial in Lynda.com on how to make a circular logo. Turned out great, the trouble is I can't lock the layers or group them together to move to my desired location.
View 5 Replies View RelatedI think I might be doing this wrong, I am trying to get contents of a specific textFrame within first group on layer called "page numbers"
It seems to work, but is a bit sketchy, the documentation indicates textFrame is all the text frames in a document, and that textFrameItem should be the specific one within collections of groups etc, maybe I am misunderstanding. this is what I am using:
var existingPageNumbers = app.activeDocument.layers.getByName('page numbers').groupItems[0].textFrames[0].contents;
is this correct approach...?
In CS5, you could move a group/layer/artboard along with all of the child objects, even if some of the objects are locked. But in CS6 the locked objects remain unmoved.
Is there a way to change this behaviour?
My Photoshop CS6 PSDs are getting flattened if opened by any previous versions of Photoshop, despite not being saved just opened. When I open the original in CS6 again, all layers are merged. Where there were 12 layers, there is now one. This is causing loads of problems.
View 11 Replies View RelatedA drawing with hundreds of layers should be simplified for our customer by decreasing the numbers of and renaming the layers (there is yet no target file existing). In order to solve this, I generated group filters and assigned every single layer to them (all printing properties are assigned to objects). The layer groups show the desired layer structure after the transformation (still a three-digit number).
Unfortunately, the LAYTRANS dialog doesn't let me choose layers by group filters or remarks. It seems as all the work was for the birds.
Is there any way to translate my layers using filters or remarks?
I use AutoCAD Civil 3D 2010.
Is it possible to search among the layers of an Illustrator file by layer name?
View 5 Replies View RelatedSo I have been trying to learn to be as non destructive as possible..one problem I've recently had is that when I try to merge layers, I will lose the mask that was on one of the layers.
View 10 Replies View RelatedWhy can't I align a single layer that is inside a layer group? The align tool would always select the top most layer group as the 'boundary' for alignment, thus automatically selecting the whole layers inside of it and align them as a group.
Is this a bug or just GIMP's weakness? It definitely reduces the layer group's usefulness.
I have just been updated to CC at work and I am having all sorts of issues. But the two main pressing ones are:
1. When I save, it keeps "not responding". Sometimes it crashes, sometimes it doesn't. When it does, I lose everything. It takes anywhere from 1 - 5 minutes to save. I thought it was an issue with a large file, but it does it to me in a one page file with only one photo in it as well.
2. Layers. This is the killer right here. Again, I thought this was a capatability issue when using old files, but it has proved me wrong. As I create layers and new artwork, it works fine. However, once I save and re-open the file, all the artwork has been combined to a single layer and then I have to dig it all out to do anything to it, only to have it do the same thing the next time I repoen the file.
Is it me? Is it default settings somewhere in CC? I have major deadlines that I think I am going to miss if things keep continueing the way they are.
System Specs:
Illustrator CC 16.0.3 (Tried to update to 17 and it said everything was up to date, twice)
Windows 7
Dell Optiplex 7010 with Core i7 and brand new AMD video card.
How do I copy PARTS of layers containing many objects from one CS5 AI (v.15.0.2) doc into a new CS5 AI doc and keep/create the same layer names?
To start with, I have one fairly complex AI document with 100 layers, with several hundred items in each layer. For example, one layer named "Stars" contains 400 separate stars (not grouped), another layer named "Crosses" contains 300 separate crosses, and a 3rd layer named "Text" contains 200 separate words (not outlined).
If I select, by marqueeing a section of the image/artboard, some (but not all) of the individual items contained in the several layers, then paste that selection into a new CS5 AI doc, I cannot get them to create new layers of the same name. Instead they go into one general layer (e.g. "Layer 101") as a jumble of discrete, but unorganized objects (no layers or sublayers). In other words, I have lost the 3 main layers from which I selected a bunch of objects.
Checking "Paste Remembers Layers" has no effect on this result. In fact "Paste Remembers Layers" does not remember layers at all. Only if I select ALL the items in the several layers will it paste those layers by those names into the new doc (or create new layers of the same names).
Of course it is a COLOSSAL waste of time copying the ENTIRE document, then pasting the WHOLE thing into the new doc (with layers retained), then deleting the parts I DON'T need.
I have just finished designing my characters. Now I have to create my background. I figured to do this, I would simply have to create my background and hide the layers above so I can see what I'm doing. However the few lines that I've created in my background are overlaping the characters, how can I resolve this?
Also after doing a brush or creating a path in general, how do i I deselect it (instead of having to bring out the selection tool and clicking anywhere on the screen)
I jut remembered something else, if i want to select an object but the selection rectangle covers the perimeter of another object, how do I avoid selecting the other object aswell?
I'm new in scripting and i need to make a script that moving all layers into a single layer (in Illustrator i press CTRL+A then CTRL+G in layers and works) but i need that in script.
View 2 Replies View RelatedI am trying to loop/iterate through all layers, determine if it's a "text-layer", if it is, set it's opacity to 0.This is what I have so far:
var iapp = new Illustrator.Application();
var openoptions = new Illustrator.OpenOptions();
var idoc = iapp.Open("c:\myFile.pdf", Illustrator.AiDocumentColorSpace.aiDocumentRGBColor, openoptions);
Illustrator.Layer mainlayer = idoc.Layers["Layer 1"];
[code]....
I frequently create multiple paths on a single layer with the intention of applying a stroke to each of them at the same time. I typically lay out the paths roughly and then go in with the Direct Select tool to refine them before applying the stroke.
In previous versions, once I'd made the last adjustment I would click off the subpath I'd been editing and then right-click and choose Stroke Path, thereby applying the stroke to each of the paths. (If I don't deselect the last sub-path I was working on, the only option I get on right-click is to stroke that sub-path.)
In CC, once I click in a blank area to deselect the sub-path it also deselects the Layer (removes the highlight from the Layer in the Layer Panel), so most of my right-click options are greyed out. I have to move back over to the Layer Panel and reselect the Layer I want to apply the strokes on.
It's possible that my old approach is bad and I should feel bad, and this added step of having to re-highlight the Layer in the Layer Panel is the bestest thing ever, but I'd kind of like to be able to avoid that additional step. That is, I'm assuming that this is somehow a feature and not a bug.
If there's no way around having to reselect the Layer after deselecting the sub-path (or after clicking on a blank area with the Direct Select tool in general), in the alternative, is there at least a quick way to select all of the sub-paths at once without losing Layer focus?
The 'Template' checkbox gets activated in Layer Options dialog box, and the box gets closed, then, the Layer name and several icons at the bottom of the Layer Panel disappear.The Layer is still there without a name, and rolling over the icons on the Layers Panel I can see the Tool Icons.Illustrator Prefs were trashed/restored using the Opt-Shift-Command restart shortcut.
View 2 Replies View RelatedFor example I would like to make my images layer Green and my copy layer Red in my layers palette.
View 6 Replies View RelatedI am trying to turn every layer in my .ai file to a raster image without flattening to one layer.
-The big issue I am dealing with is the agency that just built a paralax site for us refuses to export to PSD. I have tried every possible way to do this but keep getting the file is to big message. To add to it they had it all on 1 layer. I was able to release to sequence, but now am trying to see if rasterizing the objects will work.