I colorize black and white photos, but I also come by b/w pictures where the person's skin is so bright, it is just a white blob with eyes, nose, and a mouth. And when I colour it, it is a super-bright skin colour blob with a nose and mouth.How can I put back natural looking shadows to it?
View 4 Replies
I know it´s possible to create new characters for realistic games, Mangás and even presentation, simulating pure skin, as in people using trunks. They can preserve the face, feet, hands and even chest, however they do limbs entirelly from scratch. I know they use the ´copy area´ button, but some skin can be made from the beginning, by means of noise, patterns and gradient. I would like to know some of these techniques
I´m almost expert using ´copy area´ effects until now, but I do know it´s insufficient for a good artwork. Some limb areas still looks ´repeated´ and ´painted-like´.
All of a sudden today when i went to process photos, in either Lightroom 4 or CS5 all the skin tones are bright pink? They are fine when viewing them on my computer, just not threw adobe products.
View 1 Replies View RelatedI can't get my monitor calibration to suit everybody. Some people have told me that my pictures are too bright. Others say that they are too dim
So I am looking for a monitor calibrator which will automatically set brightness and contrast. Contrary to popular opinion, I am not concerned with color accuracy. My experience has been that the ICC IEC 61966-2.1 profile will give pleasing color results even if not always accurate. As best as I recall, my Huey (now lost) asked me to set brightness and contrast.
I have many pictures (about 10'000). Now i need a search (smart search) with pictures where only my mother (is marked)
Â
On all my pictures each person is tagged. For my mother the Person Tag is called "mother"
Â
I created a saved search with the criteria Person include "mother". The problem now is that also pictures are shown with my mother and other persons. But i would like only pictures from my mother without other persons. Something like... "Person is mother and not person "sister" and not person "friends" etc.
how can you put 1 person with another? i've been trying and it came out like this.
i smudged out teh faces. ;O
how can i like put the hand on teh shoulder?
I occasionally use GIMP to burn-down parts of portraits that compete with the face. For example, bare shoulder, midriff over-light, hands over-lit.
The skin ends up looking greyish, not like less-lit skin. It works not too badly visually, as the emphasis is on the face, but fails on inspection.
I have tried the burn tool and just plain old Brightness, both on a selected area.
David Boxing_WIP.png (202.28K)
Number of downloads: 19
Could I have a description of how to match the skin color of the head to the boxer's skin color?
I've been trying to figure out for a while now how to get beautiful sparkly bright eyes in photoshop. I've come a little ways with sharpening them and using the dodge & burn tools, but look at the eyes on this photo.
The look almost digital?
but still they're normal enough to be passed off in this photo. I've searched through google and tutorial sites to find this and I can't find anything worth while.
ive tried this one and failed really bad...
View 8 Replies View RelatedMight have been a great pic with the sunset in the background and some gold on the faces but that sun is just way to bright. I've tried several tricks but I am so unexperienced that every time when i'm trying to adjust it the whole image gets affected and looks screwed up. When the area is selected it becomes too visible that it was edited. how i can make that sun to shine softer and not to distract attention from the faces?
View 4 Replies View Relatedhow there is Proof Setup preview modes under the View menu. Can I create a custom preview mode so that when I choose it and press Ctrl + y it shows the image very bright without changing it.I need this because I want to see and edit more details in the dark areas which I may not be seeing on my monitor or room lighting conditions and thus to create images with more rich and dynamic shading in the darks so when viewed on brighter monitors or when levels are eventually changed the darks reveal nice shading instead of flat black.I'm looking for per image solution that doesn't affect other images or applications like using global gamma.
View 5 Replies View Relatedway to producing this effect.
I mean is the "bright effect".
I want to darken the background (sky) as it is too bright?
View 4 Replies View RelatedSo I start to work on something in Photoshop CS6 and suddenly certain colors don't show up right. Specifically bright bright blues and greens show as black. It seems to work in 32-bit RGB, but these colors have worked fine in standard 8-bit and I've worked with them before. Thumbnails, color picker, and saving for web seem to load the colors just fine. From what I can tell, in this random range it goes to black with saturation hits 100 in the color picker.
Attached is a screenshot. The circle is supposed to be bright blue (00d4f6) and the central rounded square is supposed to be Twitter's blue. both don't show up except for some slight coloring on the edges.
I have limited knowledge of HDR pro, however I have used it without these extra patches of colour appearing and when I tried to recreate an image which had been succesful these patches of colour are appearing.I suspect I have changed something but I can not work out what.
View 6 Replies View RelatedWhen opening a photo with some bright yellows in the foreground, the yellows all become "hot", and show up like it's some sort of a filter being applied. This is making it impossible to work with the photo & make adjustments in the Camera RAW lab. The same thing does not happen when the photo is opened to "edit" directly (versus working with it in Camera RAW lab).Â
View 3 Replies View RelatedI've been using Photoshop for awhile now, but have just recently run into this issue. When I try to use a bright color, it doesn't work - it just automatically adjusts itself to different shade. Now, I figure this is an issue with my color setting, but I can't figure it out.
Â
I attached an image of what I''m talking about below. You can see that although I've chosen to a bright green - it shows up much differently.
I added 3 different Hue Saturation Layer(s), colors Red, Yellow, and Green -Â split in 3, to a concrete image, in Photoshop. I am trying to get a really bright, sunny yellow color, however I can only get light yellow Hue Saturation Layer. How to adjust Hue for bright yellow (sunny) color?
View 2 Replies View RelatedI have a photo with a bright light in backround how do i soften it in elements 10
View 5 Replies View RelatedI have several images of t-shirts, which has to be recolored {RGB & CMYK mixture}. I tried all the recipes across the net, but none actually worked. See the IMG below.
The "best" solution seems to be the Selective Color adj. layer, but still absolutely unacceptable:
 I Tried to put several other adj. layers on the top of the Selective. C., but it went even worse.
I have created a path around a bright red ornament and it's white background. How can I clip it out? I just need the ornament. Nothing is working.
View 1 Replies View RelatedWhy do images opened in CR coming with PS CC always show 2 EV to bright? The same images opened with CR coming with my PS CS6 on another machine open almost perfect every time.
View 1 Replies View RelatedSomething happened when I aborted a batch action in ps. Now, every image I open in CR shows the clipped highlights as bright red even B+W CR2's. I have the current patch for cs5 and have re-installed ps with no improvement.
View 1 Replies View RelatedI am working on a company logo that the owner wants to have a glowing yellow ring on a white background. I have a psd file that someone else created that looks great in color, but when you print it out in black and white, the yellow ring and glow disappear. I have been trying to tell the owner that you can not have bright yellow ring on white and have it come out well when printed in black and white, but he won't let it go.
My question. Can it be done? Is there a way to have some other effect, or gray scale in the background so when printed in black and white it shows well, but when in color it is hidden?
I don't know what version it was created in, but I have the whole CS4 extended creative suite at my disposal.
how can i be able to make my photoshop/fireworks graphics look crispier...shiny and sharp...What do actually i lack if i cant achieve crispness in my web graphics?
View 6 Replies View Relatedhow to turn an ordinary portrait into a high contrast with a bright background,
View 3 Replies View Relatedhow to make the effect of my picture like this one attached!
I pressed some command key in error and got a bright blue background in the application frame around the image I've got open in Photoshop cs6. How do I get it back to the neutral gray?
View 1 Replies View RelatedIn Elements 6, every time we try to change bright white areas to another color, it doesn't work.
Â
No matter what color is picked, the result is always an area of dark, charcoal gray.
Â
Evidently, the program does not recognize Bright White as a color.
Â
Is there a way to make these changes using this program?
I cropped my picture from the white background and added a black Background and now i got a bright border around my watchÂ
Â
I found a guide via google which told me how to do that but this guide is for PS not PSE and in PSE we not have layer matting (or at least i din't found it) so my question is, is there a way to delete this "borders" from my image with PSE easy way? Or i have to delete them manually ?
Â
Here is the Link to my Picture: [URL] ...:
Â
I am Using PSE9 if that matters...
