Is the normal arrow key default increment in Photoshop (not shift+arrow, just arrow) the same length (in pixels or inches) on all standard keyboards? In other words, would the Photoshop arrow key default increment change from keyboard to keyboard?
View 4 RepliesClicking on a develop slider, then using the mouse scroll wheel is my prefered method for adjustment. Is there any way to change the default increment value of 5?
View 2 Replies View RelatedIs there a way to change the default increment for the X and Y value boxes in the Transform area of the Control panel? When I have an object selected and want to move the object by clicking the arrows beside the X and Y boxes the object moves 1/8 inch for each click. Is there a way to set that to 1/16 inch for example?
A screen grab is attached showing the area on the Control panel in question. I've checked all the Preferences settings I can find but haven't found this one yet.
When capturing screenshots with Corel Capture X6, the captured cursor always defaults to the Windows arrow pointer in the screenshot. For example, say you were taking a screenshot while using the Pen tool in CorelDRAW. The cursor is a fountain pen tip. In the screen shot it shows as the default Windows arrow pointer. Another example, you take a screenshot in Photo-Paint while using the Paint tool and the cursor looks like the brush you are using, but the screen shot shows it as the arrow pointer.
View 4 Replies View Relatedhow can I change the default arrowhead size from 3/32 to 5/32... I am able to change it from the palettes only after I insert it.
I would like to have all leaders of all styles match the same style far as arrowhead size... multi-leaders are defaulted as 5/32 and after using them forwe like them this size verses the 3/32 size of the quick leader.
why doesn't the arrow leader disappear when I flip my arrow direction to the inside..
see image
I'm trying to record an action that does the following:
1. Duplicate layer
2. Rotate the duplicate 15%
3. Drop the opacity of the duplicate 15%
The problem is the last step: How can I record a drop of 15% in opacity in an action? If I set the opacity to 85% then Photoshop will set the opacity of every duplicate as 85% and not minus it from the current opacity value of the layer.
So how can I create an action that will minus 15% from the current opacity of the layer?
Im using Photoshop CS5. This being the 12th version of Photoshop. I still cant find a reason why they have not put the adjustments for keyboard increments in text or leading like In design and Illustrator has. I mean, Photoshop engineers have concluded for themselves that all designers in the world increase or decrease typography in 2 pts?
View 4 Replies View RelatedI just upgraded to CS6 and my font size and leading shortcut on a Mac (Shift + CMND + >) will only increment by one pixel. How can I change it back to two?
View 15 Replies View RelatedI am looking for a way to increment an attribute so that when i have a block with a number attribute and i make multiple copies of or array it the number changes incrementally.
View 1 Replies View RelatedI have this 3d file of mine (which i have worked so hard for it), and it's size has increased to 240 Mb's! I assume this has happened due to forced closings and the backup files ... i have already deleted them... but it didn't work. i ant even copy my model into a new work space.
View 8 Replies View RelatedHow to get the value of Keyboard Increment in illustrator,JS? Like Object > Preferences > General >Keyboard Increment.
View 2 Replies View RelatedI am trying to make a game where when the user presses a button it increments a score on stage.So far I set a text field on stage with name counter:
//set the value of a Symbol variable
sym.setVariable("score", "0");
sym.$("counter").html(sym.getVariable("score"));
How do I code a button to increment this score each time it is clicked?
I have an alignment that starts at station 1+00 and runs through 20+00.
By right clicking the station labels and editing the label group, I have updated my major station increments to 200' and my minor stations (ticks only) to 100'. The problem is, I want the 200' increments to begin at my starting station (1+00), so that the labels would read 1+00, 3+00, 5+00, etc.
As it is now, the above settings make my labels read: 1+00, 2+00, 4+00, 6+00, etc.
Does AutoCAD have a function to copy and increment text? Say I have a piece of text that says Area 1, I want to copy this text a number of times so that I get Area2, Area3, Area4 by just copying ..
View 9 Replies View RelatedI have successfully used lisp ATTINC if normal blocks.
If not working in dynamic blocks.
When changes position of attribute becomes anonymous block (*U### = anonymous blocks).
I tried to use Unanon.lsp but disappear dynamic properties of the block.
I cannot set it to .0001 inch, when I do, it automatically changes it to .0002 inch. I've been able to have a nudge factor of .0001 inch since I can remember.
The two images I'm including show my .0001 being typed, then when I switch fields it shows it going to .0002, why won't it stay on .0001 inch?
i have been trying for an option called auto numbering of attributes. i have a drawing of floor plan in every room there are 5 to 6 switch boards.I have to give a code and numbers to switchboard like SB1, SB2.......SB42 etc. there are like some 150 switchboards, so i have made an attribute with code and number. problem is when ever i have to add or delete some switch boards some where in the middle. again i have to start renumbering my switch board attribute blocks again from starting. It is very time consuming. is there any command renumbering all attribute blocks in one command.
View 3 Replies View RelatedIs it possible to increment text or attributes in a dynamic block? I'm want to create elevation text for grids that can start at a certain value and increment up or down from there.
View 1 Replies View RelatedI'm being asked to add a increment alphabetic labels to my alignment
ex: A1 A2 A3
My DIESEL is not so good.I have a macro and he works, but when i touch enter. He doesn't start over, but start halfway.
userr1! ^C^C-layer;m;H17-Tekst;;-style;Standard;;;;;;;;c;5;-mt;@0,0;h;3;j;mc;@0,0;$m=$(getvar,userr1);;userr1;$(+,1,$(getvar,userr1))
I've got a D Block that should be REALLY simple. It's an equipment rack that you can array to the side to add more, and stretch up with a linear parameter to change the overall height of the rack. However, we usually have numbers marking the rack units going up the side of the rack. I know there's no way to make the numbers increment with a dynamic block, so I just took them out.
I put in markers so that you could see where the rack units were, but they're not arraying properly!
I want to reset my sketch increment on my template so when i start a new part it is on sketch1, not sketch3
I know I can grab the original template and redo it but I am sure I have seen a method to do this.
I notice that when I hit shift to create a straight line, it seems to be straight in about 1° increments.
Is there anywhere that I can specify the increment angle? Mostly, I make 90° straight lines, so I'd like to up this increment so that there is a more noticeable space in between the increments.
I'm scaling a block with increment each 0.5 mm on x and y. But when I get out of the block the size is no longer the same.
Ex: 2,5mm scale gives 2.667mm
3mm --> 3,115, etc.
Hw can I fix it?
I'm working in a file zoomed fully to 6400%. I've changed the Keyboard increment to the smallest it will allow to 0.0036 mm.
I have two lines. Line 2 sits on line 1, a fraction above. When I select line 2 and press the down arrow key, it jumps so that line 2 is now a fraction below line one. I cannot get the lines to sit perfectly onto of one another.
I have tried to move the line using the mouse, but it snaps to the same position as the keyboard press.
I have turn off snap to grid, snap to point, all the guides, smart guides.
Creating sample lines at a specific increment within a range starting from the start of the range is impossible unless the start of the range is divisible by the increment. This is a defect that needs fixing.
Meanwhile you'll find me typing in the 93 locations for my sample lines. I believe this is what we made computers for.
I want to be able to pull the numerical value of a text and be able to increment it by a specified amount to then rewrite the text to the new number...
More specifically i have a floor plan with numbered rooms say 1-100... These numbers refer to a separate schedule with the actual room names and i am trying to keep them in order by plotted sheet... Say area "A" on the first sheet is numbers 1-10...
If halfway through the naming process i notice that i forgot a room in section "A" i now need to increment all the numbers 11-100 by one to 12-101 and add the room number to section "A" that now contains 1-11...
Currently i use TCOUNT to individually select each number in order 11,12,13,14 - 99, 100... to increment this way is very tedious and it would be easier if i could just select the numbers 11-100 with a bounding box and be able to extract the text, convert it to a number, increment, rewrite the original text for every selected text no matter of order..It has been so long since i have written lisp that i am not really sure where to begin..
I've read about a command before which can copy entities with increment via specified distance, horizontal or vertical. Now I need it but can't figure out what was that command.
View 4 Replies View RelatedI have an alignment and have station labels. The alignment is labeled with "Major Stations" at every 100 feet. I need to change the station increment to 25 feet and have labels. I have done this although station 1+25 is still reading 1, station 1+50 is reading 1, etc. There is a precision variable somewhere, and I can't figure it out. I have played with the alignment labels style but no luck. Is there a global drawing settings somewhere that might be controlling this?
View 2 Replies View RelatedI'm not sure if it possible although I am trying to rename layout tabs an easier way. Say I have layout tabs A01 to A99 and I want to insert another layout tab at position A20. I need to rename (the old) A20 to A21, then A21 to A22 then A99 to A100 etc.
Any fast way to do this or a lisp that does this.