Photoshop :: Increment Opacity In Action
Mar 11, 2012
I'm trying to record an action that does the following:
1. Duplicate layer
2. Rotate the duplicate 15%
3. Drop the opacity of the duplicate 15%
The problem is the last step: How can I record a drop of 15% in opacity in an action? If I set the opacity to 85% then Photoshop will set the opacity of every duplicate as 85% and not minus it from the current opacity value of the layer.
So how can I create an action that will minus 15% from the current opacity of the layer?
View 10 Replies
ADVERTISEMENT
Mar 22, 2008
When running an action, I click in the opacity box and change it to 65.
Yet in the action I see a step for changing to 6 and then for 65.
It really seems to be touchy. What is the exacty keystroke to get in that box?
View 4 Replies
View Related
Aug 26, 2013
It does it every 4-6 times which is really really often since you brush about 10 times every 3 seconds or so when digital painting especially when shading, lighting, blending, etc with brushing.
Why does it do this? I cant recall when it started doing this but I think it was either when I updated from CS4 to CS6 or maybe it just randomly kicked in. I already updated my drivers and re-installed my tablet.
View 2 Replies
View Related
Feb 10, 2014
In the animation I am working on, I need an object to instantly go from 100% opacity to 0% opacity. The problem is, even if you use the opacity of the layer as a keyframe, the object will not instanlty vanish, even if it is only on for the timeruler for a quick amount of time.
I need a tool that will drop from 100% opacity to 0% instantly.
View 2 Replies
View Related
Aug 19, 2009
Is the normal arrow key default increment in Photoshop (not shift+arrow, just arrow) the same length (in pixels or inches) on all standard keyboards? In other words, would the Photoshop arrow key default increment change from keyboard to keyboard?
View 4 Replies
View Related
Nov 28, 2013
Im using Photoshop CS5. This being the 12th version of Photoshop. I still cant find a reason why they have not put the adjustments for keyboard increments in text or leading like In design and Illustrator has. I mean, Photoshop engineers have concluded for themselves that all designers in the world increase or decrease typography in 2 pts?
View 4 Replies
View Related
Apr 5, 2013
I just upgraded to CS6 and my font size and leading shortcut on a Mac (Shift + CMND + >) will only increment by one pixel. How can I change it back to two?
View 15 Replies
View Related
Nov 14, 2012
I am looking for a way to increment an attribute so that when i have a block with a number attribute and i make multiple copies of or array it the number changes incrementally.
View 1 Replies
View Related
Jul 5, 2013
I have this 3d file of mine (which i have worked so hard for it), and it's size has increased to 240 Mb's! I assume this has happened due to forced closings and the backup files ... i have already deleted them... but it didn't work. i ant even copy my model into a new work space.
View 8 Replies
View Related
Mar 18, 2013
How to get the value of Keyboard Increment in illustrator,JS? Like Object > Preferences > General >Keyboard Increment.
View 2 Replies
View Related
Mar 31, 2012
Clicking on a develop slider, then using the mouse scroll wheel is my prefered method for adjustment. Is there any way to change the default increment value of 5?
View 2 Replies
View Related
Apr 27, 2013
I am trying to make a game where when the user presses a button it increments a score on stage.So far I set a text field on stage with name counter:
//set the value of a Symbol variable
sym.setVariable("score", "0");
sym.$("counter").html(sym.getVariable("score"));
How do I code a button to increment this score each time it is clicked?
View 5 Replies
View Related
Aug 13, 2012
I have an alignment that starts at station 1+00 and runs through 20+00.
By right clicking the station labels and editing the label group, I have updated my major station increments to 200' and my minor stations (ticks only) to 100'. The problem is, I want the 200' increments to begin at my starting station (1+00), so that the labels would read 1+00, 3+00, 5+00, etc.
As it is now, the above settings make my labels read: 1+00, 2+00, 4+00, 6+00, etc.
View 5 Replies
View Related
Aug 21, 2012
Does AutoCAD have a function to copy and increment text? Say I have a piece of text that says Area 1, I want to copy this text a number of times so that I get Area2, Area3, Area4 by just copying ..
View 9 Replies
View Related
Jun 2, 2011
I have successfully used lisp ATTINC if normal blocks.
If not working in dynamic blocks.
When changes position of attribute becomes anonymous block (*U### = anonymous blocks).
I tried to use Unanon.lsp but disappear dynamic properties of the block.
View 7 Replies
View Related
Apr 25, 2013
I cannot set it to .0001 inch, when I do, it automatically changes it to .0002 inch. I've been able to have a nudge factor of .0001 inch since I can remember.
The two images I'm including show my .0001 being typed, then when I switch fields it shows it going to .0002, why won't it stay on .0001 inch?
View 1 Replies
View Related
Jan 28, 2011
Sure wish you could manipulate the Column Offset of an Array Action with a Stretch Action.
CSHADEDESIGN|AUTOCAD LT|LT-KB|DYNAMIC BLOCKS
View 2 Replies
View Related
Feb 21, 2013
i have been trying for an option called auto numbering of attributes. i have a drawing of floor plan in every room there are 5 to 6 switch boards.I have to give a code and numbers to switchboard like SB1, SB2.......SB42 etc. there are like some 150 switchboards, so i have made an attribute with code and number. problem is when ever i have to add or delete some switch boards some where in the middle. again i have to start renumbering my switch board attribute blocks again from starting. It is very time consuming. is there any command renumbering all attribute blocks in one command.
View 3 Replies
View Related
Nov 21, 2013
Is it possible to increment text or attributes in a dynamic block? I'm want to create elevation text for grids that can start at a certain value and increment up or down from there.
View 1 Replies
View Related
Feb 23, 2012
I'm being asked to add a increment alphabetic labels to my alignment
ex: A1 A2 A3
View 4 Replies
View Related
Dec 21, 2011
My DIESEL is not so good.I have a macro and he works, but when i touch enter. He doesn't start over, but start halfway.
userr1! ^C^C-layer;m;H17-Tekst;;-style;Standard;;;;;;;;c;5;-mt;@0,0;h;3;j;mc;@0,0;$m=$(getvar,userr1);;userr1;$(+,1,$(getvar,userr1))
View 2 Replies
View Related
Nov 16, 2011
I've got a D Block that should be REALLY simple. It's an equipment rack that you can array to the side to add more, and stretch up with a linear parameter to change the overall height of the rack. However, we usually have numbers marking the rack units going up the side of the rack. I know there's no way to make the numbers increment with a dynamic block, so I just took them out.
I put in markers so that you could see where the rack units were, but they're not arraying properly!
View 9 Replies
View Related
May 18, 2011
I want to reset my sketch increment on my template so when i start a new part it is on sketch1, not sketch3
I know I can grab the original template and redo it but I am sure I have seen a method to do this.
View 4 Replies
View Related
Mar 21, 2013
I notice that when I hit shift to create a straight line, it seems to be straight in about 1° increments.
Is there anywhere that I can specify the increment angle? Mostly, I make 90° straight lines, so I'd like to up this increment so that there is a more noticeable space in between the increments.
View 2 Replies
View Related
Oct 16, 2012
I'm scaling a block with increment each 0.5 mm on x and y. But when I get out of the block the size is no longer the same.
Ex: 2,5mm scale gives 2.667mm
3mm --> 3,115, etc.
Hw can I fix it?
View 5 Replies
View Related
May 17, 2012
Is there a way to change the default increment for the X and Y value boxes in the Transform area of the Control panel? When I have an object selected and want to move the object by clicking the arrows beside the X and Y boxes the object moves 1/8 inch for each click. Is there a way to set that to 1/16 inch for example?
A screen grab is attached showing the area on the Control panel in question. I've checked all the Preferences settings I can find but haven't found this one yet.
View 9 Replies
View Related
Nov 28, 2013
I'm working in a file zoomed fully to 6400%. I've changed the Keyboard increment to the smallest it will allow to 0.0036 mm.
I have two lines. Line 2 sits on line 1, a fraction above. When I select line 2 and press the down arrow key, it jumps so that line 2 is now a fraction below line one. I cannot get the lines to sit perfectly onto of one another.
I have tried to move the line using the mouse, but it snaps to the same position as the keyboard press.
I have turn off snap to grid, snap to point, all the guides, smart guides.
View 3 Replies
View Related
May 13, 2013
Creating sample lines at a specific increment within a range starting from the start of the range is impossible unless the start of the range is divisible by the increment. This is a defect that needs fixing.
Meanwhile you'll find me typing in the 93 locations for my sample lines. I believe this is what we made computers for.
View 9 Replies
View Related
Sep 11, 2012
I want to be able to pull the numerical value of a text and be able to increment it by a specified amount to then rewrite the text to the new number...
More specifically i have a floor plan with numbered rooms say 1-100... These numbers refer to a separate schedule with the actual room names and i am trying to keep them in order by plotted sheet... Say area "A" on the first sheet is numbers 1-10...
If halfway through the naming process i notice that i forgot a room in section "A" i now need to increment all the numbers 11-100 by one to 12-101 and add the room number to section "A" that now contains 1-11...
Currently i use TCOUNT to individually select each number in order 11,12,13,14 - 99, 100... to increment this way is very tedious and it would be easier if i could just select the numbers 11-100 with a bounding box and be able to extract the text, convert it to a number, increment, rewrite the original text for every selected text no matter of order..It has been so long since i have written lisp that i am not really sure where to begin..
View 4 Replies
View Related
Dec 17, 2011
I've read about a command before which can copy entities with increment via specified distance, horizontal or vertical. Now I need it but can't figure out what was that command.
View 4 Replies
View Related
Nov 12, 2013
I have an alignment and have station labels. The alignment is labeled with "Major Stations" at every 100 feet. I need to change the station increment to 25 feet and have labels. I have done this although station 1+25 is still reading 1, station 1+50 is reading 1, etc. There is a precision variable somewhere, and I can't figure it out. I have played with the alignment labels style but no luck. Is there a global drawing settings somewhere that might be controlling this?
View 2 Replies
View Related
