I concretely need the tool included in the Menu Analisys of Photoshop Extended CS3. Now I have upgrade to Photoshop CS6 into Creative Cloud but I don't find the way to download and install Extended from Creative Cloud.
View 3 RepliesThe 3D menu is there but not the Analysis menu. I'm trying to set the scale measurement; i have the scale icon and it works, but i need to go into the Analysis menu to set the scale - and it's not there! Can't find it, or any reference to this (only to the 3D menu being missing, which is usually they don't have Extended).
Running Windows 7 pro on a Radeon HD6850 graphics card, i have "use graphics processor" selected in the preferences menu.
When I go to Environments>Frame Analysis, I used to get a menu for Constraints, Loads and other settings (similar to the Stress Analyisis menu). I don't get that now. I can right-click on an existing simulation and add constraints and loads, but I would really like to get the menu back.
I can go to tools>Customize, Toolbars tab and Frame Analysis Panel is there. I can click Show and it will show the panel but it stays up all the time. Not what I want.
I have tried resetting the menu, repair installing Inventor and Reinstalling Inventor, but still not joy. How do I get this back to the original setting so that it comes up when I select Frame Analysis?
This is in 2011.
A co-worker scanned a photo and emailed it to me to edit it and try to improve it, but everything I want to do is grayed out so I can't select it and I can't figure out why. Maybe it has to do with how she scanned it?
It's CMYK, 300 dpi, and 8 bit.
I'd like to sharpen it and adjust the hue/saturation, but they're grayed out.
why this is happening and how I can work around this so I can make the changes I need to make?
When selecting a sub menu from within a main drop down menu the arrow points to the right but the actual sub menu pops up on the left in most cases. I have only noticed this recently and wonder if I have inadvertently messed up a setting as in the past I cant recall this being so but I don't use the editor a lot so may be mistaken.
View 9 Replies View RelatedIs there a way of simplifying the spectrum of colors in an image into, say, 10 colors and analysing how much of the image each color makes up? The closest I've got is using the cutout filter and select color range. Does anyone have any better ideas?
View 1 Replies View Relatedway of simplifying the spectrum of colors in an image into, say, 10 colors and analysing how much of the image each color makes up? The closest I've got is using the cutout filter and select color range.
View 1 Replies View RelatedI recently upgraded to 2012 but forgot to install the express tools, Doh!. I installed them through control panel repair and everything works. Except when I close and restart ACAD the menu bar express menu disappears. I can bring it back by using cuiload but this is not ideal. Any way to get it to stick?
AutoCAD 2012
Dell Precision T7400, Intel Xeon @3.4GHz
Win XP 32bit 4GB RAM
Nvidia Quadro FX 3700
Cyborg R.A.T. 7 mouse
How do I add custom menu items to the main menu in Illustrator?
I would like to build my own menu with scripts that I use alot. This is a powerful feature that I use alot in other programs, but I have not seen any examples of this in illustrator.
all the twirly triangle dropdown menu things (what's the official term?) underneath the contents menu of layers. Especially now that I'm working with Convert to Shape Layer functionality I'm wondering what an efficient/shortcut based way to work with these inner menus is. For instance when converting Text to Shape layers - it seems like I'm spending most of my time dealing with twirly triangle management
I don't even know how to search for them: obviously searching for anything "collapse" takes one to a bunch of collapse transformations stuff.
I recently switched from Photoshop CS6 to Photoshop Creative Cloud. Whereas in the CS6 version, I could not count the number of pixels in a selection (I was not using the Extended version), I was happy to read that this split was removed and this function is available in Photoshop CC. Or, should be available. As it happens, when I go to Image -> Analysis, all options (except for Ruler Tool) are greyed out. This is the case when no document is opened, when a document with multiple layers is opened, or when a simple single-layer document is opened. The software is up to date (accoding to the Application Manager).
Can it be a limitation of the 32-bits version, and should I switch to a 64-bit version?
Using VS X5 - Just making up a menu for my dvd im burning. Haven made a menu since using ..VS11+ I think it was.
All seems very very familar...similar etc and not asking it to do anything out of the ordinary which 11+ couldnt cope with ( just nowadays using all this AVCHD malaky etc )
Question -Main menu of my dvd - Why am I getting on my main menu page the begininings of my movie!!! I have my main menu setup ( bringing in a pre-made 30second clip on which I will put 'Press Play to watch movie' and/or 'chapter select'. ) When i preview my main menu page...I see the 30second clip i wanted but as it runs so too does my actual movie - at the same time.
I cant seem to find a button to ..basically..tell it not to play the movie as soon as you load the dvd but instead to wait until the 30 second main menu runs and automatically reruns etc until YOU decide to press the 'Play movie' button.
Does photoshop offer frequency domain analysis of an image?
The standard way to remove noise, i.e. background spots, is do spectrum analysis and remove those high-frenquency signal. Is photoshop image-> adjustment -> level a frequency analysis?
The Add People feature has stopped working in Elements 11. I just get the message "no new people found in your selection". Yet, when i open a picture there will be faces that are marked in the photo awaiting tagging. I have thousands of photos and having to open each one individually just to tag faces is not why i purchased this software. It worked well in version 10 and was much better in 11 until it stopped working.
It worked great until about 3 weeks ago. I have not changed any settings on my end. I have followed the directions on the following threads:
[URL]
I have reset to default settings I renamed the psa.prf, status.dat and the peoplestatus.dat files. Neither of those have worked. Short of uninstalling and re-installing i am at my wits end.
I intended to add more option at right click shortcut menu. Is it possible to be done?
View 2 Replies View RelatedI want to add the menu in the main menubar where the File Edit etc. are there.
how to do this using .NET ?
I'm trying to use the Image Analysis functionality of PS CS6 to obtain brightness levels from an image.
To test the "Gray Value" measurment, I've created 11 patches from 0%-100% in 10% increments. I used the fill tool (Shift-F5) and specified values using H=0, S=0, B=<percentage_value (0-100)>.
The respective RGB components of the generated patches are exactly as expected (255*percentage_value).
The measurements obtained through "Record Measurement", however, do not agree, with the exception of the 0% and 100% extremes, which are reported with 0 and 255, respectively.
Inbetween, there is disagreement which rises from 0 @ 0% to the highest (5 @ 50%) to then decrease again to 0 @ 100%.
Here is the series by which the reported Gray Values are too low (from 0% - 100%): 0, 3, 3, 4 4, 5, 3, 3, 2, 1, 0.
How come?
I've tried removing colour profiles (to exclude gamma encoding issues) and using different colour spaces and/or models, with no change in behaviour.
All my patches are pure gray so there shouldn't be any problem with unexpected colour weighting.
One funny observation I've made is that even though the patches are a 100% homogenous, PS reports different miminum and maximum values. For instance for the 50% brightness patch (RGB triples of 128, 128, 128), the report is MinVal=123, MaxVal=124, MeanVal=123.934809.
Clearly, the value for all three aspects should be the same, and I expect the value to be 128.
I'm using PS CS6, Version: 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00) x32, on Win 7.
I am working on a plugin for adobe illustrator CS6 by using adobe CS6 SDK. By using this plugin I need to add a Me nu Item In File Menu of Adobe Illustrator.
I have used the following code for this:
______________________________________________________________________ ________
SPBasicSuite *mBasic = message->d.basic;
AIMenuSuite *sAIMenu;
mBasic->AcquireSuite(kAIMenuSuite,kAIMenuVersion, (const void**)&sAIMenu);
SPPluginRef plugin;
[Code]...
But i have nothing as output.
I just loaded Elements 11 onto my windows 11 laptop and imported about 15,000 photos. I was really looking forward to using the face recognition for tagging the photos but it does not seem to work. When I click "Mark Face" it always says people analysis is yet to be run and when I click yes to run it, nothing happens. Same thing when I click "Add People+", it just flashing something quickly on the screen and then nothing happens. I have "People Recognition" checked in the view screen and "Analyze Photos for people" checked in my preferences.
View 7 Replies View RelatedI did a scene with a 25x15ft room lit with two windows on the south end. anyway, there's a big difference when i set FG Falloff distance to be say start: 0.0 stop: 200ft or 400ft vs. not using fall off.
it also changes the values on my light meter.i'm guessing here that use of falloff is not going to give real world results for lighting analysis but haven't read anything (that i have found so far).
Is the general consensus that MR Sky Portals should be used when performing Lighting Analysis?
View 1 Replies View RelatedIf I only have sketchup terrain model which I could export to DWG.Am I able to bring that DWG into Autocad MAP 3D to do slope analysis?If not, how should I do? What kind of file type I need? Or I need more information other than a model to do slope analysis in Autocad MAP 3D?
View 3 Replies View RelatedI`m trying to determine will Inventor satisfy the needs that I`m having regarding simulation options. So I started with some elementary stuff.
If it is possible in stress analysis to manually select which degrees of freedom body has.
"Fixed constraint" block all 6 DOF and I would like to block only transitional DOF so that I keep rotational degrees of freedom?
Am working in River Analysis dwg and go to save and get message "One or more objects cannot be saved to the specified format."
What's the deal?
I want to know all about solar radiation analysis in revit 2013. any tutorial link? I have tried it on my design but it only opens sun path. and there is no "add ins" option.
View 5 Replies View RelatedWhile I run analyze, there's always an error
View 1 Replies View RelatedI am trying to find a software package that would allow me to model lightweight steel structures; agricultural style barns (up to 60x100) constructed of bar trusses and columns. I can do hand analysis, but for multiple buildings per month, it would be too time consuming. I prefer something more user friendly than finite element analysis, that would produce a quality analysis report.
I have read some through the Revit summary, but it focuses more on the maximum potential of the program and doesn't describe the minimum level it will perform at; I will never be designing a multi - story steel stadium or warehouse or office park, etc.
I have created two feature buffers - one at 25m and one at 50m. I only want to show the area between 25m and 50m and am struggling to get the Feature Overlay analysis to do this. Is it possible and if so how?
There are no intersecting areas and I'm trying to display the "doughnut" area.
IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600
Is there a way to re-execute the video analysis of the Mercalli filter without having to actually remove the filter and reapply it to the video clip?
I can't seem to find an easy way without removing the filter.
I have created a report from a frame analysis of an arrangement of I-Beam steelwork. I need to check that I have placed the nodes in the right order and this is reflected in the results of the report. I have the parent and child nodes connected at the ends of the beams as shown on the attached screen shot. I'm interested to know if the order in which I have selected the nods makes any difference to the results. There a 3 node connection points at each corner section.
View 3 Replies View RelatedWhere can we find documentation or tutorials on the River Analysis package as it is with IDSU 2014?
We are in the middle of a few projects using BOSS's RiverCAD but with the new 2014 License files we can no longer use the AutoCAD 2010 that ran with RiverCAD.
So, I'm scrambling to get my user up and running with River Analysis and how (if possible) to port our RiverCAD projects to River Analysis with as little pain as possible.
I have to admit, I don't use RiverCAD and have not yet installed IDSU 2014. (I'm making the deployment now).
I'd really like to ditch having to support AutoCAD 2010 and RiverCAD....
[URL] .......