Photoshop Elements :: Add People Analysis Not Working In 11
Apr 14, 2013
The Add People feature has stopped working in Elements 11. I just get the message "no new people found in your selection". Yet, when i open a picture there will be faces that are marked in the photo awaiting tagging. I have thousands of photos and having to open each one individually just to tag faces is not why i purchased this software. It worked well in version 10 and was much better in 11 until it stopped working.
It worked great until about 3 weeks ago. I have not changed any settings on my end. I have followed the directions on the following threads:
[URL]
I have reset to default settings I renamed the psa.prf, status.dat and the peoplestatus.dat files. Neither of those have worked. Short of uninstalling and re-installing i am at my wits end.
View 2 Replies
ADVERTISEMENT
Nov 28, 2012
I just loaded Elements 11 onto my windows 11 laptop and imported about 15,000 photos. I was really looking forward to using the face recognition for tagging the photos but it does not seem to work. When I click "Mark Face" it always says people analysis is yet to be run and when I click yes to run it, nothing happens. Same thing when I click "Add People+", it just flashing something quickly on the screen and then nothing happens. I have "People Recognition" checked in the view screen and "Analyze Photos for people" checked in my preferences.
View 7 Replies
View Related
Jan 26, 2013
I have photoshop elements 11. People analyzer will not recognize people or allow me to tag people in my photos. It works with my older camera photos such as from my Nikon D300 but will not work with photos from my D800 (RAW).
View 10 Replies
View Related
Dec 8, 2013
I've now finally got PSE12 installed. However the 'Add People' functionality is not working.
In the 'People' tab, when I click the 'Add People' button I get the 'preparing files' dialogue box. I then get a message saying "You have labelled everyone in your selection" (whether I've made a selection or not in 'Media'). I can 'add people' in an individual photo but not by clicking 'add people' either in Media or People view. This worked fine for me in PSE11.
I'm using Windows 7 and don't have any other PSE versions installed.
View 11 Replies
View Related
Oct 2, 2012
I recently upgraded from PSE 10 to PSE 11. I already used tags to identify People by name. However, in the new People View not all of my people tags are present as People Stacks despite running the face recognition function. If I use the Add People function it just runs the face recognition feature that I have already run and named the specific person I want to see in the stacks.Strange thing is when I click the Add Group button I can see the missing people but do not know how to get them shown in the People Stacks?
View 3 Replies
View Related
Apr 29, 2013
I have about 11,000 pix in PSE 11 and growing, all of a large family. Using 'Add People" in organizer worked well up till I reached 9,000 pix. I get the msg that all faces have been tagged. I've been scanning about 300 pix from our old albums and always try to add people after each group. I am not even getting the "Is this a person" message. I can go to each batch and manually answer "Who is this? Database size problem??
View 4 Replies
View Related
Dec 30, 2012
I have just upgraded from PSE 9 to PSE 11 and have imported some pictures that I have tagged in another program. Importing tags for everything other than people works fine (already used tags are recognized and reused). But importing tags for people proved to be a problem. They did not merge automatically with my previous people tags in PSE. My imported people tags ar now placed under "Imported Keyword Tags" in the "Media" workspace. How do I merge or move them to the "People" work space where the people tags for PSE 11 is placed?
I also wonder why people and other tags are put in different places. Is it possible to view all keyword tags in one list/place?
View 2 Replies
View Related
Oct 11, 2012
I am using Inventor 2009 professional and I have to run a stress analysis on a beam. I put the constraints and the forces I need and when I hit the calculate button, the results so up, but when I click on the results, nothing appears. I need to run this calculation and do not want to resort to hand calculations.
View 9 Replies
View Related
Nov 23, 2013
How do I tag people in PSE 11?
View 5 Replies
View Related
Feb 1, 2012
If I have photographs with my children from age 1 through 40 in them, Should I sequence the search from age one on up, at say, one year increments? When you tell it to IGNORE is it just for that pass? Why does it constantly miss the obvious, known, face and ask about the bend in the chair that is not even a person?
Is there a better way to TAG People?
View 12 Replies
View Related
May 11, 2013
I have an assignment in school in which we are going to calculate the number of needed rivets and their dimensions to join two pieces of aluminum with the dimensions 5x50x200mm together.
I've created the sheet metal and imported two of them into an assembly along with 8 rivets from the content center with the appropiete dimensions. In comes my problem. I planned on running a stress analysis and pasting the pictures of the results in my report. However, I have a feeling that the stress analysis tool isn't working as it should.
No matter what force I'm applying to the sheet metals, and no matter what material I assign to the different parts, including the rivets, the results, the deformation and force applied to the rivets, are roughly the same.
I've applied a force of 12700N to the two short sides of the sheet metals:
The two sheet metals are also fixed on the opposite side of the forces:
[URL]
View 1 Replies
View Related
Jul 16, 2013
I can't add people to my new elements 11 organizer. Keeps telling me no new people found.
View 8 Replies
View Related
Nov 7, 2013
I have a user who has a problem with creating meshes in the Inventor Stress Analysis environment. When trying to create meshes in assemblies (after clicking the Mesh View button), the Mesh progress meter gets to about 80% done, then backs up a step, then never moves forward after that. He has let it run all night and no further progress is made. I noticed that the FEAComputeServer.exe process uses 25% to 50% of the CPU usage until about a minute after the mesh progress meter stops. Then the FEAComputeServer.exe CPU usage drops to zero.
The odd thing is that this is happening on only 1 computer. The exact same assemlies can be meshed without problems on his laptop and my computer. We have tried the following to solve the problem:
1. Adjusted Mesh Settings to various values.
2. Both Inventor 2014 SP1 and Update 1 for SP1 are installed
3. Updated the video driver. Video card is a NVIDIA Quadro 4000. Video driver is version NVIDIA's 331.65 WHQL certified ODE driver.
4. Uninstalled and reinstalled all Autodesk products using the procedure at [URL]
5. As part of the uninstall, we also removed MS .NET Frameworks and C++ Redistrubutables so that the Autodesk installer would install it's preferred flavor of these utilities.
6. Reinstalled SP1 and Update 1 for SP1.
Since the issue is happening on just 1 computer, I don't think the issue is related to the part geometry itself. The only other thing I can think of that could cause this is just bad hardware.
View 3 Replies
View Related
Aug 30, 2011
I tried to open the Storm and Sanitary Sewer analysis program and got an error message. The error message asked me to send a report but the report was rejected.
View 8 Replies
View Related
Oct 30, 2013
How do you turn off people recognition in Elements 10 to get rid of those annoying squares that appear on images?
View 1 Replies
View Related
Nov 26, 2012
just upgraded from elements 8 to 10 and it wont allow me to work in the organizer, stuck on installing people recogition
View 18 Replies
View Related
Nov 12, 2012
How do I separate people from backgrounds?
View 1 Replies
View Related
Apr 19, 2013
I've just started using PSE 11 Organizer and tried to add some of my pictures to People. I selected several photos in the Media Room and then clicked the Add people button. After a brief time, a dialog momentarily appeared and then immediatly closed and a ghost message appeared saying "No new people in your selection". I tried other different selections but all with the same result. I checked the People tab and there are no people listed there.
View 4 Replies
View Related
Nov 28, 2012
I could attach a photo to a 'People' tag in PSE7, but the tag is v different in PSE 11.
View 9 Replies
View Related
Dec 9, 2012
I upgraded from PSE9 to PSE11 and now the tags are separated on the right side, with the people tags below a line from which you can no longer add these tags to photos.
How am I supposed to add people tags to new photos?
View 3 Replies
View Related
Mar 23, 2013
During face recognition i mistype some names. Now i have unwanted tag names in the people tag catalog without any reference to pictures.
How can i delete those tags? I'm working with a germen version.
View 3 Replies
View Related
Sep 23, 2013
Running PSE 11 on Win 8. Have many People Tags entered over the years, but now they do not show in the area to the right where all other Tags are listed. I can no longer add a people tag to any photos.
View 3 Replies
View Related
Jan 3, 2013
In photoshop elements 11, 4 people have vanished from the "All people" view. The actual photos are still tagged with their names, but I can't use the feature to see all photos with a particular person as they are neither in the "all people" view, nor the list of people tags. It so happens that these 4 names were previously used as tags in my previous version of Elements 7.
View 1 Replies
View Related
Apr 7, 2013
I just converted from Photoshop Elements 10 to 11. I can't find how to edit my people tags in 11. Is there away? If so what is it?
View 5 Replies
View Related
Sep 28, 2013
When I run People Recognition (PSE 10), the dialog box opens and after some delay (appears to be processing) simply closes without error or results. I forced a repair to my Catalog which happens to be very large (66K files).
View 1 Replies
View Related
May 28, 2013
I'm using Elements 11. I imported some photos to my catalog and the program asked if I wanted to import the tags as well. Of course I did and so did the program. However, now when I want to find pictures of a specific person that I tagged in people taggs in elements are separate from the photos in the normal tag with the same name of that person. So I have to review both places to find all of the pictures for that person.
Is there any way to change a normal tag to a "peoples tag" so that I will find all images of that person when I want to find it?
In my opinion it is a little strange that there is now the distinction between two different tag types. If I save the tags to the file via "Save Metadata to Files" then the peoples tags are written in the normal tags section in the files since Windows seems to know only one tag system. So when I import the files again in Elements then naturally the peoples tags are converted to normal tags because it could not distinguish which is which.
Is there a better solution? Can I just combine the normal tags with people tags? It's far too hard to retag all of the photos and the automatic face recognition doesn't work very well in many cases so a lot of work is necessary.
View 1 Replies
View Related
Nov 8, 2013
I've been having trouble getting the People recognition tool to work on Elements 12.
It picked up a load of different faces at first, but I still have thousands of photos left which the program now refuses to pick up faces from - whenever I select photos (even in small batches) it comes up with a message saying "No new people found in your selection". However, when I click on the individual photos it still has the windows round the faces asking me who they are.
Need to get the facial recognition tool working again. I'd rather not have to go through each photo individually when batch tagging is so much quicker.
View 11 Replies
View Related
Mar 12, 2013
My "people tags" used in pse 10 now show up as groups in pse 11, how do I add photos to these groups?
View 2 Replies
View Related
Feb 27, 2013
If I backup my catalog with people that are tagged, when I restore the catalog (fresh Install on new PC) will the tagged people be restored as well?
View 1 Replies
View Related
Nov 26, 2012
I notice that on my people keywords tags 13 of the tags have thumbnails and 4 do not. I have always had "show people recognition" turned on.Can I add a thumnail to the people tags which do not have one?Can I change an existing thumbnail on a people tag?
View 1 Replies
View Related
Jan 1, 2013
I upgraded from Elemetns 10 to Elements 11, but cannot find the "people tags" (Family, Friends, etc) that I had with Elements 10. How can I tag photos with the tags that were set up in Elemetns 10?
View 1 Replies
View Related
