Paint.NET :: Fitting One Image Upon Another?
Jun 30, 2013
Let's say I have two images, a square photo of a person, and a square picture frame. I want to put the photo in the frame so it looks natural.
Now here's the catch: the picture frame image is displayed at a slight angle, so it's shaped sort of like a parallelogram. So when I put the square photo on top, and rotate it as best I can, it still does not 'fit' naturally in the frame.
My question is how can I make the photo fit naturally?
View 3 Replies
ADVERTISEMENT
Dec 7, 2011
I have a project that is just under 100 minutes and VideoStudio reports that it requires 5.31GB. I have tried all 6 provided templates and 2 new templates that I created, using compression factors down to 60%. Every one still shows the 5.31Gb requirement. How do I adjust settings to put this project on a 4.7Gb DVD?
View 2 Replies
View Related
Oct 14, 2013
For more years I can remember, I have been using CorelDraw4 - I use it for designs for t-shirts and various other printing requirements. A lot of this work involves fitting text to path, particularly round the bottom of a circle. I know how to do it in CorelDraw4, how to do it in Corel draw X5 - I can get wording on the top of the circle, but cannot get separate at the bottom of the circle.
View 5 Replies
View Related
Jan 19, 2011
When I fit a line of text to a curve, it never quite 'fits.' The text is always skewed across the curve, instead of being 'on' the curve. Is there a way to fit the text exactly on the curve/line?
View 3 Replies
View Related
Feb 9, 2012
Fitting text to a specified area. To clarify, I am trying to fill letters into a Harley Davidson logo. The top and bottom rockers on the logo have the text skewed to fit the shape of the shield. If you are familiar with the logo, the text in the top and bottom rockers has one flat side and one stretched side.
I've attempted to try some text to path options but they aren't doing at all what I need. It's essentially a standard line of text with either the top or bottom (respectively) stretched to fit the point of the top rocker and the curve of the bottom.
View 3 Replies
View Related
Aug 31, 2013
text on tyre.jpg
Just wondering what techniques do you vehicle illustration masters use to adjust text to the tyres.
View 10 Replies
View Related
Mar 31, 2011
If my video project is to big to fit on a 4.7G disc and X4 prompt to fit it in the burn to ISO or Video TS stage, the end result have 1 or more video clips converted to heavily low quality, approximately a bit more than 3000 bit rate, but not all the video clips are converted. The end result is that some video clips have grainy scenes with some artifacts on the TV.
Since it is very time consuming to batch convert all the videos of the project to a lower bit rate in order to fit it on a 4.7G disc (choosing one bit rate specification, see if all videos plus menus fit, choose another lower bit rate and start batch converting again if not...), I decided to use the 8.5G option of X4 with the original quality formerly rendered videos and finish the dvd building in that way. After that I choose DVD Shrink 3.2 to compress it on 4.7G. DVD Shrink successfully compress a 5.2G project DVD to 4.7G (actually 4.4G) with a 95% compression rate with a sharp function. The overall end result's playback quality was far more better than when using batch convert to a lower bit rate with X4. Just want to mention that X2 handled such a compress to fit request better.
The last time I've needed to go the DVD Shrink way for compressing large DVD sizes were in the days of VS 11. By mentioning VS11, that was also the time when I got several crashes with DVD authorizing. I remember I had to set VS 11 to convert all DVD compliant MPEG again to have a smooth playback without Video/Audio multiplexing problems.I always use formerly rendered MPEG2 files. I never use the edited project to author a DVD.
View 12 Replies
View Related
Jan 10, 2012
I downloaded a hose fitting ipt file from the Parker website and did the Tube and Pipe Authoring thing to put it into the content center as a new family in a new read/write library. When I browse for it to use as the Start Fitting on my hose, the new family does not appear in the list. What is my problem?
The new library is checked in my Projects configuration. I have been monkeying with the NS column of the family and can't seem to get it back to its original format now.
View 8 Replies
View Related
Jun 18, 2004
Any easy way to fit an image to path? fFor example, if I have a horizontal photo that is 10"long by 3" high, how can I warp/stretch/arc this imagr around a CD label so that the entire image wraps around the label?
View 2 Replies
View Related
Oct 10, 2011
when im switching my drawing into paper space and then trying to print it my drawing is massive and only small part of it id in the peper space.
View 9 Replies
View Related
May 14, 2011
I am relatively un-practiced using AutoCAD and I am struggling with keeping my drawing in the state it was created. All of my curved lines seem to have moved or doubled so now there are two of the same very close to each other which makes the line width seem heavy. Because my curved lines are not exactly where I created them now it means that my hatching does not sit flush with its boundary. A separate issue is that when I am choosing 'pick points' to hatch, they take a very long time to select before the hatch box appears.
View 4 Replies
View Related
Nov 3, 2013
With shapes that are intended to fit exactly with one another, such as shapes created with pathfinder>divide I find often that there are very small cracks between the shapes and that these will show up if the shapes are exported to Photoshop in a more pronounced way.
What's the workaround to 'seal' one shape to another and rid the result of these gaps?
Joining the shapes is not an option as they are different colours.
View 1 Replies
View Related
Nov 4, 2013
I could have sworn a while back that I had stumbled across an option within Illustrator (I'm currently using CC) to specify a certain amount of "padding" to leave around an object when cropping it. I can't recall if I saw this in the Artboard settings, in the Save For Web settings or somewhere else - if at all. Is this possible within Illustrator. In other words, if I draw a shape and want to crop the artboard to fit the dimensions of the shape, plus leave an extra 25px of padding around the shape.
View 2 Replies
View Related
Sep 26, 2013
I'm trying to find a way to fit a text inside a shape and to align it exactly to the shape borders, I was trying to play with the justification panel under the paragraph link but couldn't make it work,
I was trying to fit my text inside a shape look like the number 7 so eventually when a viewer see it they can recognize the number 7 without a stroke - only by the text insize the shape, above is an example of what happe when I try the same with a circular shape - I would like the test to fit in nicely filling the entire circle.
View 5 Replies
View Related
Nov 19, 2012
I have a sinusoidal curve, that I've created using a third party app, which has worked really well. But the app only produces the form in a straight line and i now need to fit it to a number of curves.
I have a form of 3 radii and a couple of flats, which the sinusoidal form needs to fit along. All this work is just in 2D as i need to output the dxf into a CNC machine.
View 3 Replies
View Related
May 30, 2013
Longtime C3D user, new to pressure pipes though. It seems one cannot mask pressure fittings in plan view. Is that correct?
Using C3D 2014
View 2 Replies
View Related
Jan 30, 2013
I am trying to add geometry programatically to a duct fitting. This is because the content builder is incapable of correctly building some types of fittings. I found some old code from an Autodesk University class that shows how to add geometry to a AEC object. I have modified it a little to be able to work with a duct fitting but it does not work. The code compiles fine and runs fine without any errors. The geometry is just not added.
[CommandMethod("ACAClassCode", "ExModelerModifyBody", CommandFlags.Modal)] public void ModifyBody() { Database db = HostApplicationServices.WorkingDatabase; Editor ed =
[Code]....
View 1 Replies
View Related
Aug 23, 2013
I've just got AutoCAD 2012 and mkaing some rings, I needed to fit the same textures of a ring of 8mm in a 6mm ring. My problem is that the inside diameter is larger in the 6mm ring, and that's why I can't use the Scale command. Is there a command that allows me to fit all the objects in this area??
Here is the file with both of the rings.
View 2 Replies
View Related
Jan 18, 2012
Pipe and tank plant layouts, now need to make a modified (not standard) pipe fitting.
Looking for a pipe plug drawing. the fitting (Imperial) is 4—10. Four inch NPT piping. Appears to have a slight taper, very slight.
Or, better yet, a G 3-3/4" pipe thread(?).
a *.dwg (AutoCAD 2007) drawing?
View 7 Replies
View Related
Aug 29, 2012
I have a couple of users who accidently added connections to the wrong parts and made them fittings.
For the life of me I cannot remember how to turn them back into regular Inventor parts.
I've removed the connection points, but the parts still appear as fittings when placed into an assembly.
Inventor 2012 SP3 ~ Vault Pro 2013
Lenovo D20 Workstation Intel Xenon E5640@2.67GHz (2)
Win 7, 24gb RAM, NVIDIA Quadro FX 3800
View 8 Replies
View Related
Sep 14, 2012
Put together a pressure network and actually plotted it out for a project? Are the fittings and appurtenances even readable? I have a network setup on 40 scale plans and when plotted out, you can't even tell what a recuder is compared to a valve. Tees are obvious but thats only because of the branch pipe coming off of it. Our company uses the old basic symbols that are blown up big enough that dimensionally, they are not correct but visually they look really nice.
View 9 Replies
View Related
Feb 28, 2013
I'm trying to make a piping run that at one point branches off in another direction. Basically I want to have one straight pipe, a main line, where another pipe branches off and sticks out vertically from it and goes its own way. However, I want this branching pipe to be welded to the main line, not connected with a tee fitting. Inventor won't let me create branches from within a route, and it doesn't seem to want to let me snap to the existing main line run if I create a new run for the branching pipe.
View 5 Replies
View Related
Nov 11, 2011
I had a hydraulic hose connected to an elbow fitting and now it has been changed a straight fitting.
What is the proper way to do this so that it is still adaptive?
And how can I reconnect the hose to the new fitting and have it adaptive?
View 2 Replies
View Related
Dec 13, 2013
I'm physiotherapist and researcher interested in human body posture analysis. Goal of my researches are to make 3d digital model of human posture. Right now I'm using Microsoft kinect to build a human body model, but it's difficult to do automatic analysis on that mesh. In our team we create an algorithm which analysis posture, right now we base on points located on the body, for that is necessary to manually locate that point's which is inaccurate and time consuming. Our idea is to use divide human body into segments and then fit in those segments some geometry figures ( cylinders , bal, ), next step is to calculate center of masses of those figures, so we simplify the posture to 20-40 points , and calculation of those points can be made automatic.
View 1 Replies
View Related
Jul 16, 2010
Using Routed Systems in the Tube & Pipe Authoring dialog page on the End Treatment pull down -- is there a detailed list of what the different end treatments mean ? such as what does "Quick Connect" exactly mean, or Swaged, single ferrule or dual (such as used with a Swagelok fitting)... What can you do with "Other".... etc..
View 9 Replies
View Related
Sep 11, 2013
I am designing pressure pipe network for water supply line in civil 3d 2013.In that ,I am not able to insert 90 degree bends,change pipe properties know that there is default bends available in civil 3d but I need more fittings and different dia pipe. I asl know that in C:program dataAutodeskenupressure pipe fittings in that all fittings are available and SSL there is .*sqlite file available. But I Don't know to how to import this pipe fittings in civil 3d 2013.
View 3 Replies
View Related
May 27, 2011
i'm using my corelphoto paint x3 for a year now and it is working fyn then on one occassion i don't know but while editing an image, i suddenly discovered that my effect tools, paint tools, clone tools wont work or wont make changes on the image i'm editing... i've already checked the menus and settings but still no work..i also tried reinstalling the program but still it's all the same..
View 2 Replies
View Related
Mar 25, 2013
I'm having trouble using the paint brushes in photo paint x6. i open a JPEG or bitmap then use a paint brush to paint on the image but there is no paint. do i have to use a mask now? I tried copying a dupe for a second layer to see if that worked but nix. i still have x4 and i do it there. but what's with x6? all the other tools work but the paint brush.
View 14 Replies
View Related
Oct 28, 2011
I have a rectangular screen grab (Windows application) that I would like to simply round the corners and add a border. The image is not a photograph, but since I have Paint Shop Pro X3 and like how it works, I thought I would try it . I have spent some time trying to do this with Paint Shop Pro X3 with no luck. None of the pre-defined frames seemed to do what I need. I would also like to create a drop-shadow behind the image. how to do this or a video that I can watch. A list of steps would also be OK.
View 1 Replies
View Related
Jun 8, 2012
How can I create a 2D gray scale image from a color image?
View 1 Replies
View Related
Dec 29, 2011
I was just wondering as to whether its possible to keep the checkered base which you get when you remove part of an image or have it transparent to stay in the created image.
I am sure you all know this.
Here is the YouTube background which I have created and wondering if I am able to keep the checkered base or whatever in the image after I have saved it rather than print screening and pasting it back like a jigsaw puzzle.
View 6 Replies
View Related
