Is there a new plugin or anything available to allow selecting a ruler measurement in feet with Paint.Net?
Or anything in the works yet? All I see is pixels, inches, or cenimenters. Maybe a free third party overlay or something.
I was under the impression that the rulers across the top and bottom of the canvas were measuring the length and width of the window at the given resolution.
However, this can't be the case, because I notice that when I crop a photo down from a width of 70 to a width of 20 on the ruler, when the crop finishes, the width of the canvas is back to looking like 70, so the ruler is not absolute, but some kind of relative measure? And is there a way to get an absolute ruler either of any unit?
How could i know if i'm using meters, and not inches, feet or millimeters? and how to set autocad to use meters not inches, feet, nor millimeters.
View 9 Replies View RelatedI have created a custom measurement tool to measure distances (captured from sattelite imagery, and using the distance key as the guide) and it works great. However, I would like to be able to use the same tool to measure curves/radiuses. Say for instance a mountain road. I know the scale of the photo, and can measure any straight (line) angle, but can I do the same for a curve or radius using the same scale?
View 6 Replies View Relatedmy copy of photoshop cs5.5 has no "use measurement scale" tab on the ruler tool bar. Is this right?
View 5 Replies View RelatedIs there a way to make AutoCAD2012 display the area of a closed Polyline as Feet- Inch(ex 22'-4") rather than the feet as a decimal (ex feet=22.3333333) as it does when the units are set to Architectural or Engineering?
View 1 Replies View RelatedI have a drawing set up to be Survey Feet and everytime i export it to autocad using the export tool it converts it to international feet.
Civil 3D 2012 all sp's
I'm new, but like this program more than the windows 7 version of paint.
Â
How to switch my ruler to measure tenths of an inch, I need to build something off of graph paper, and it is tedious so I was hoping to do it digitally... How to do that, or am I blind and completely missed something?
I love Paint.net. It's the only image editor I use now and has pretty much every feature I need in an image editor. But today I'm attempting a project I can't seem to find the right tools for.
I'm trying to copy and paste a rectangle onto another image. But the object in the image I'm pasting to is tilted slightly. So I need to find a way to change my copied rectangle into a trapezoid that will make it look natural on the new image.
Under LAYERS - ROTATE / ZOOM, I found some tools that seem to work. But now I need to select only the trapezoid to paste to the new image. The only cropping tools I can find only allow a rectangular selection. I can't find a tool to choose a corner to corner irregular selection. Does Paint.net have such a tool or is there a plugin I can download for this process.
I would like to have a function so I can -at least- select the differences that sets picture a apart from picture b.
Is there a plugin for that or is it even build in p.n?
I am trying to edit a number of photos for a Ken Burns type travelogue, and that means I have to make all my color and other adjustments, and then edit to a common size (1280x720). This usually means resizing the photo which gives me the 1280, and then I need to pick which 720 of the image to include. With the rectangular select I can get close, but my mouse movement is usually too much to get exactly to 720, so I often end up having to resize again to drop/add a couple rows.
Is there some way to set a selection box to be a certain size so it could then be moved up and down in the image, and then crop the image when you have selected the portion you want?
Just to clarify, I know of the "Fixed Size" selection. But it is almost as impossible to get that lined up so that you get the full 1280 width as it is to get the bounding box dropped to exactly 720...
I do not want to use the the Pen Tool to make selections of Vectors! I want to know if it possible to use the Pen Tool to select say the eyes or the arm or the chair or the apple, etc! Then convert that vector pen tool selection into a Raster selection?
Photoshop and Gimp do this! I would love this feature in PaintShop Pro X5, but since that out maybe the next version X6!
In Photoshop, there is a SELECT/COLOR RANGE tool that allows the selection of Highlights, Shadows, etc. Is there anything comparable in PSP X6? This would be very useful when trying to adjust for example blown highlights.
View 3 Replies View RelatedPSP X4 opens in the Edit page. When I select the "Manage" tab, the program freezes and I need to use the Task Manager to shut the program down.
I contacted Corel and they told me to reinstall the program. I have done so but the problem still persists. I have the service pack 2 installed.
Windows 7 Home Premium
Dell 64 bit, 3.2 GHz
memory 12gb
Intel i5
How do I select a vector object whose property has been set to invisible? I am using PSP v7.04
View 2 Replies View RelatedI don't know if it is a bug, or something to do with Windows7 but it has been bugging me for quite a while.
On my old computer (which ran Windows XP), i could choose to open several images in PSP (all versions i had at the time) and the number of selected files didn`t seem to matter. Now, on my new computer (since a few years), i run with Windows7 and i find that if i select more than 4 files to open at once (usually jpg or png) i get an error message asking me to "select a valid file". If i deselect enough files to reach 4, it opens them fine.
It is not a big issue, although it might get a bit annoying if i have 20 small files to open at once, as i have to do it in groups of 4 at the time.
I noticed in Cassel's excellent Wishlist for X6 that she said:
Cassel wrote:since it is possible to have the text too long or otherwise extending outside the image, it is impossible to select the whole text to change the font or the size or the kerning.
I have a transparent PNG file that I want to overlap onto a background and be able to fill the transparent areas of the PNG with the background. I know you can do it for text but I can't figure out how to do it for images.
See my examples. M1.png is my transparent file. (not sure why the image is showing in black) I want to overlay this PNG on a background and have it come out looking similar to image m.jpg
To view these files [URL] .......
I have a very simple picture in jpeg format. The picture is all in white on an orange background.I would like to use Paint.net to select the white picture and place it on no-colour background.
View 4 Replies View RelatedI am trying to select the thorns/rose seperately in the attatched image, but because of the varying levels of definition of the borders, I cant see any way to do so other than by hand pixel by pixel. Are there any addons that make this task easier, or is there a simple function that I have just not seen.
Â
My goal is to overlay it on three seperate colored layers, and "cut through" the lower layers with the top layer set on multiply, that way coloring the details while leaving the shading intact.
[URL]
when the eyedropper is selected, and the 'Select sample' button is pushed, no marquee is drawn when selecting the area to be sampled.Actually, it will often leave an XOR artefact at the beginning of the rectangle where the mouse is first clicked. (At WM_LBUTTONDOWN) this would be fixed in update #2 as I use this feature all the time, and having no marquee makes it very awkward to use.It should be an easy fix as marquees are drawn successfully when selecting a rectangular mask area and the Rectangle tool etc., and it seems sensible to me to call the same subroutine for all rubber rectangle actions.
View 14 Replies View RelatedI am having a problem with a delay in selecting an object and selecting a command.
When I select an object the pointer has at least a 3 second delay before it starts moving around normally again. It is the same with selecting a command. This has started to get tedious. It has worked fine in the past so I don't think it is a RAM/graphics card problem.
OK, today, or actually just this afternoon I've noticed it has become much harder to select items with the mouse.
Points, nodes, etc...anything where you'd typically hover the mouse over the item and it highlights for you to select it.
For example, lets say you want to project a point from another sketch, or select the center node of a line, etc.
Never really had an issue until this afternoon where now it seems I have to be right on top of the item and I cannot budge one bit or it won't select it. It is now taking me numerous attempts to select things like points (zooming in does not work, points scale accordingly).
Is there a setting somewhere? I can't seem to find such under Tools>Application Options and the like.
I cannot find the time ruler on my screen or where you can add it in. There is simply a slider, with no ruler underneath it. Where can I find this feature?
View 1 Replies View RelatedI can't figure out what to do to see the pixels like in the image below:
[URL]........
According to Adobe Photoshop CS3 Classroom in a Book, there's a ruler tool hidden behind the Eyedropper tool. All I see are the Eyedropper tool, the Color sampler tool, and the Count tool.
I have Adobe Photoshop CS3 Extended, v10.0.1
How do I get the ruler tool?
I use the ruler tool a lot and hate the way it keeps reverting to the eye-dropper tool in the toolbar all the time! Is there a way to stop this from happening? If you use the ruler tool, then some other tools all seems okay until you save the image - at that point the ruler is replaced with the default eye-dropper tool. Therefore if you want to use it again you have to select it again which is a pain. Most tools seem to stay as they are when saving except the ruler. This was the same in CS3 by the way. I was hoping this might have been fixed in CS4. I'm using CS4ext in Vista Business.
View 1 Replies View Relatedhow do I find the ruler tool?
But it acts like a pen tool you click one place and then anther and tells you distance in pixels....?
Maybe it was only in CS....
I got 7.0....?
I need to make a ruler in 1/32nd increments 4 inches high and 1/2 inch wide, I've tried going for help in other places but I'm such a newb to PS that I can't get it to come out right.....
View 6 Replies View RelatedHow could I put a ruler effect around an image?
View 8 Replies View Relatedwhen my ruler is set 1:1 that the scale does not give an accurate reading when I place a ruler on screen and measure it. Can this be corrected or am I just being daft.
View 2 Replies View Related