Paint.NET :: Opacity In Brush When Using Cloning
Feb 26, 2011
If I select Layers\Import from File... to import a new image into my current project, then anchor the cloning brush (in the newly imported), then select a location from the existing image...I can successfully clone.
I'm trying to figure out how soften or reduce the opacity of just the brush. In other words, what I'm cloning comes out way to strong. In some other packages, I'm able to set the opacity of the brush to soften what I'm copying.
View 3 Replies
ADVERTISEMENT
Oct 11, 2011
Sometimes when I am cloning a portion of a single layer, I want to make the copied pixels less opaque. How to I set the clone stamp to make the material I am copying more transparent.?
View 6 Replies
View Related
Aug 26, 2013
It does it every 4-6 times which is really really often since you brush about 10 times every 3 seconds or so when digital painting especially when shading, lighting, blending, etc with brushing.
Why does it do this? I cant recall when it started doing this but I think it was either when I updated from CS4 to CS6 or maybe it just randomly kicked in. I already updated my drivers and re-installed my tablet.
View 2 Replies
View Related
Sep 28, 2011
how to use the Cloning Tool? Most of the tools are easy to figure out, but I cannot figure this one out!
View 3 Replies
View Related
Dec 28, 2012
It is posible to do this in next version perhaps?
View 3 Replies
View Related
Aug 2, 2008
Does anyone know how to photo shop calculates the resulting color when using brush opacity?
For example If I paint over a section with 100% brush opacity, then go over it again with another color with 100% brush opacity then the new color replaces the old. But what happens if when I go over the first color with a new color set at 50% opacity? How does Photoshop calculate the resulting color?
View 2 Replies
View Related
Nov 29, 2012
I would like to clone one object from one picture to another. When I have 2 pictures side by side and I want to clone one object to the other pictures the percentages are not the same with each other and the object is out og proportion. How do I get both pictures with the same percentages? As an example maybe there's a fire hydrant and I would like to clone it to the other picture and have it look as a 1 to 1 ratio.
View 2 Replies
View Related
Sep 8, 2011
For many years, I used the Photo House program on Corel Print House Magic v.4 as my photo editor/image generator of choice. Considering it was a freebie with a printer, I found it to be a remarkably versatile program which really opened up my creativity. I'd tried Adobe Photo Shop, which I didn't find at all user-friendly, plus a few other programs - but I kept coming back to Photo House.
Anyway... it worked fine on every Windows version from 98 onwards. But it won't work on Windows 7. It'll load... but it crashes as soon as I try to do anything. Someone suggested changing the compatibility mode - but I'm running Home Premiun, which doesn't have that option. Currently I'm using Gimp, which is okay - kind of Photo Shop Lite - but it still won't do certain things that I used to do all the time on Photo House. So I'm now thinking of going for Paint Shop Pro as v. 4's now come out (I was told to avoid v. 3 because of some glitches).
What I'd like to know is whether the program incorporates those features I used lots on Photo House and haven't found since. They are:
1) The ability to open two photographs side by side and clone an image from one of them directly onto the other one. I used to do things like have a landscape and clone a figure onto it from the other photograph, which gave a much better effect than doing cut and paste. I'm presuming this sort of thing can be done using layers (never used them before) - but doing it the way I used to do it was very easy, and working with layers looks a lot more difficult.
2) The brushes and spray gun on Photo House had a huge choice of heads/shapes to choose from, with variable degrees of opacity. One such head was a star shape, which if used with the spray gun would give a stunning effect of a spray of stars of varying size and colour. I used that a lot in some children's illustrations I do. Gimp doesn't have that feature, and nothing else I've looked at seems to have, either.
View 9 Replies
View Related
May 7, 2012
In CS6 when I increase/decrease size of my brush using alt+right-click on pen tablet, sometimes I also unintentionally change brush opacity by couple percentage (obviously my hand won't move perfectly horizontally every time I want to do it). It kills flow during work of course and I have to stick to CS5 for now unfortunately.I have only found option for turning off hardness change in preferences.
View 22 Replies
View Related
Feb 13, 2013
I've run into two problems using the brush tool:
1. When I use a low opacity to gradually build up highlights in a drawing the opacity seems to skip a few strokes: Nothing is actually happening after a fes brush strokes and then suddenly there's a bright line, nothing inbetween. It looks like i was drawing with 50% opacity even though it was actually 5%. All other option such as pressure sensitivity are turend off.
2. When drawing a straight line with the brushtool, and then zooming in, I can see the individual spots that make up the brushstroke. It looks like brushspacing was on even though it wasn't.
I use cs6 on a windows 7 platform and have a wacom intuos 4.
my graphic card is a GeForceGT 540M
View 5 Replies
View Related
Jul 25, 2013
I am trying to remove some wires in front of a complex background. (I tried a different spot for the photo, but didn't really work....so I was stuck with the wires.) Anyway, apart from just zooming way in and using the clone tool, do I have any options with smart cloning or healing? I searched the PSPX5 file for smart and heal etc., but didn't find anything.
View 14 Replies
View Related
Mar 7, 2012
I just got an Intuos5 and I'm not very experienced with the Photoshop settings regarding tablet usage. I want to replicate the effect of drawing on paper with a marker, without lifting my pen. If you go back and forth over the same spot 15 times on a piece of paper with a marker without (lifting the marker), that spot will be much darker than if you make one stroke. I understand that in Photoshop I can lift my pen off the tablet and do the same stroke 15 times, but logistically, that just doesn't work with the way I draw.
Basically, I'm wondering if there's a way to make it so opacity is purely dependent on how many times a certain spot is covered WITHOUT LIFTING MY PEN.I know there are controls to switch brush opacity to coincide with pen pressure, but I don't want to destroy my new tablet by carving into it to have a pure black stroke.
To demonstrate what I mean by this, here's an extremely crude example in which the left represents how photoshop works for me now, versus how I'd like it to work. Notice how going over the same spot within the same stroke, those intersections are darkened.
View 11 Replies
View Related
Mar 18, 2013
My Brush opacity reponds to pen pressure of my wacom tablet even if it is deactivated in the Transfer dynamics control
View 5 Replies
View Related
Jul 7, 2013
I have a problem whereby my brush does not deliver the full color opacity even at 100%. It only delivers up to 50% (sort of). But I had to stroke twice to get the color that I want. This happens when Transfer option with Opacity Jitter is set to Pen Pressure. Why is this so?
However, Flow Jitter does not seem to have a problem with delivering the full color under Pen Pressure. I'm using a Wacom Intuous 4 Medium tablet.
View 1 Replies
View Related
Nov 6, 2012
I completely reinstalled GIMP 2.8 and put Andrew's Script (found here: URL....) into "C/USER/ADMIN/GIMP 2.8/SCRIPTS" (I'm stuck with Windows Vista Home Premium) running on an Acer laptop. Now the "Opacity" and "Brush Size" sliders have shown up where they're supposed to have been on the first install.
My middle mouse wheel used to control brush size - I recently reinstalled my updated Logitech mouse drivers and I'll bet if I go to "Setpoint" in my system tray, I'll be able to configure the mouse wheel from there. That's where I had to go in order to fix the tilt control in Google Earth after I updated the mouse drivers.
I just installed GIMP 2.8, with Andrew's GIMP Script FU and now I can't find the brush opacity slider anywhere (EDIT: Or the brush/eraser/pencil etc SIZE slider - there also appears to be no way to set my middle mouse wheel as the controller for the brush size). I've used GIMP for awhile and I know how to move around but I'm not very good with it.
View 1 Replies
View Related
Sep 8, 2011
How to assign keyboard shortcut for brush opacity in GIMP...
View 1 Replies
View Related
Mar 23, 2012
Opacity is shown along with Diameter and Hardness, when Alt - Right click is done while using a round brush (in this case, with the Dodge tool).I guess it's late, but I don't sense a gesture that causes the Opacity to change in this mode. I tried all the modifier keys and moving the mouse every which way. I even tried the scroll wheel, but couldn't get the Opacity to change.
How do I change the Opacity (besides the old traditional way)?
View 10 Replies
View Related
Oct 11, 2012
Photoshop CS5...For whatever reason the hotkeys for controling brush opacity and flow switch randomly, and its a bit frustrtating in my work flow.For the hotkey for Opacity will atlernate between 0-9 and shift + 0-9
The hokey for Flow will alternate between 0-9 and shift + 0-9 as wellOne project I will be used to useing shift + 0-9 to adjust the flow, but in the next document it will alter opacity instead.
View 2 Replies
View Related
Jun 1, 2012
Is it possible to disable the drag-up-and-down opacity change of the brush tool when alt+right clicking, only keeping the size change function?
View 1 Replies
View Related
Jan 23, 2013
In Photoshop 6 the preview of the brushsize get almost invisible when working with low opacity, the same problem occurs when working with Dodge tool and low exposure.
In earlier versions the preview showed in 100% even if working in low opacity. Now it's impossible to se how big feather och the size of the brush without first going up too higher opacity. Can I somehow show the preview in 100% even if working in low opacity like 3%?
View 5 Replies
View Related
Nov 13, 2012
I always used the number keys to set opacity in brush tool. Suddenly it now affects flow, not opacity. At the same time this functionality changed I started having to click on a mask for the [ ] keys to change brush size. I used to be able to change size without selecting the mask. Did I inadvertently change some setting? I am using CS5 12.0 x 64 on Mac in 10.6.8.
View 2 Replies
View Related
Jul 30, 2013
I was trying painting with gimp and there is a shortcut in gimp to change the size of the brush/opacity my moving the stylus like you can on photoshop or sketchbook pro.
ALT+ctrl on a mac
This would be an incredible time-saver for us artists and not very complex. If not I will suggest this feature to the gimo developers.
View 5 Replies
View Related
Dec 9, 2012
brush painting on adjustment layers is not working at the correct opacity. For example I have it set for 100% but its only working at 10 or 20%. How can I fix this?
View 2 Replies
View Related
Aug 1, 2013
I'd like to scatter a small image randomly, like you can with scatter & size jitter. I can't think of any way to do that on this image other than make a brush out of it, but creating a brush from the image will change its color uniformly. I'd like to keep the color and opacity of the image the same, but have it scattered. I
View 4 Replies
View Related
Nov 11, 2012
The brush size on my paint brush and clone stamp are not working properly.
View 1 Replies
View Related
Oct 3, 2013
the size of the brush at the Brush Mask Tool can not be changed when I pressing the Shiftbutton
X6.4 - Win7
View 2 Replies
View Related
May 28, 2013
you can see what i mean in the following picture examples.
Selecting a brush (any 1 pixel) brush
[URL]........
shows my selection . Drawing a straight line
[URL]........
Zooming in to the line (600%) you can see i can draw a marquee through half of it ...
[URL].........
No matter what 1 single pixel brush i use this will happen... no matter which computer i use cs6 on and different copies of the installation. Anyway have any insight into this? frankly... it's somewhat limiting that i can't use the brush for stroking a shape if i need a pixel line and yet soft curves that a pencil won't get you.
View 6 Replies
View Related
Sep 8, 2012
I am not very good with photoshop, and if there was a brush tool setting to make it just like an actual paint brush.
View 1 Replies
View Related
Jul 5, 2012
I'm using a tablet with gimp and I want to be able to set the brush size for the paint brush and also for the eraser, separately. What happens now is that I'll set the paintbrush size to 10px, paint for a little while, turn the pen over to erase and the eraser will now be at 10px. So I'll adjust the eraser size to something like 50px, erase, turn over, and now the paintbrush is at 50px. Grrrrrrr... I tried creating new brushes for both the paintbrush and the eraser, but there's no brush size option. This is my first time using gimp so I'm probably missing something.
View 4 Replies
View Related
Oct 18, 2008
how to turn down the opacity of the eraser?
View 5 Replies
View Related
Nov 21, 2011
How do I lower the opacity of a selection? I know how to lower the entire layer, but is there a special plugin I need?
View 2 Replies
View Related
