I want to make a picture (a photograph) bigger.i want to enlarge a detail of it.first i zoom in for a 200 % ,then i click on "file",then "save as..."but when i "print" i get the whole picture and not the bigger detail of the image.
View 3 Replies
I have the brush editor open, and I make the radius bigger and the circle in the brush editor gets bigger; but when I go to the picture, the circle for the eraser stays the same size. What am I missing here?
View 1 Replies View Relatedi cut out the head of a friend of mine and i want to put it over the head of someone else but the first cutout is to big and for the life of me i cant figure out how to make it smaller.
View 3 Replies View Relatedi recorded video in 60fps, but the camera automatically converted video in 29,9fps, so it made the video slow-mo. But now i want the video in original 100% speed and 60fps (í want to use twixtor at some parts, so 60fps is needed). I use after fx 5.5 and sony action cam.
View 8 Replies View RelatedI am in layers. I have a background and an image, the image is too small. How do I get it bigger to fit on the background?
View 1 Replies View RelatedI just learnt to use Adobe Illustrator , the basics anyway. I am able to manipulate the size of the logo to almost scale in Illustrator. However, when I save the logo in JPEG/PNG for the web its always coming out smaller than i would like it to and i cant seem to get it to the size i want.
View 1 Replies View RelatedInventor 2012, in an *.idw, can you make the detail boundary box square? I see there are two options for two different circles but not an option to make it square. Is it not possible or am I missing something?
View 2 Replies View RelatedI am looking to extract natural noise from a photographs material and create a black and white layer out of it, but I am new to photoshop and unsure how to proceed with this.
For example, here is a photograph of a hard plastic gun.
I have seen on forums where users will find a good reference image and use it to create a new black and white noise picture utilizing the reference.
For instance the hard plastic noise from the gun, might look like this once extracted and done correctly.
how to produce something such as this?
I go-image-resize-resample-unncheck resize all layers-set new value via % (tried 400%)-lock aspect ratio in a jpeg image.but not much happens, I want to try and double the size, where am I going wrong?
View 14 Replies View RelatedI took this pic and I thought I would be able to enlarge and sharpen it so the writing would be readable, but so far I've had no luck.
Is there a way to do this?
Attached Thumbnails
Without blurring it?
Also, how do I enlarge it with percents (like so, if I want to enlarge an image by 200%, how would I do so?)
I have many photos of the busts/heads of statues that I would like to extract to follow the outline of the head/bust to then use to create a transparent .png file for use in graphics projects. Can PSP do this? How? I see that the default setting for a photograph is a single background layer; do you create a duplicate layer and then what?
View 4 Replies View RelatedCan I change a photograph I have been working on to look like a sketch....... to 300dpi ?
View 6 Replies View RelatedOK im working on Zelda a link to the past images and those things are like 24 pixels an object is there a way i can make the pixel bigger without stretching or re sizing cause that make it all blurry
Look okif you cant see them here
[URL]...
[URL]....
THE LITTLE ONE IS THE NORMAL SIZE then i re size it and it looks blurry you might not see it but in the game it looks too real
I want to change the background in the photo to a black or dark grey colour so the greetings card stands out
View 3 Replies View RelatedI'm having strange things go on with Paint Shop Pro. One, it stopped automatically recognizing the camera when I plug it in to upload new photos. Now I have to tell it to open the camera, and, even if I have 100 old photos and 25 new ones, it uploads all of them again! Second, the file names have changed for the photos. They've always been the date "20132713_*.jpg". Now it opens them as "001.jpg, or 002.jpg, etc. How can I get it to go back to opening with the date as the file name.....and recognizing the camera and automatically open new photos in the camera?
View 3 Replies View RelatedI have a photograph of a page of a book. The bottom and sides are straight, but the top is curved. What tool/plugin can I use to straighten the top edge and the text?
I'm sure there must be one, but there are so many different plugins and I have limited experience with Paint.Net that I am a bit lost!
I created a canvas with 10 x 15 cm.
I am unable to create a vector rectangle or to set a raster image layer to fit 3 x 4 cm. I intend to fill the 10 x 15 cm canvas with a plenty of 3 x 4 cm photos.
a) Considering a rectangle vector, I set it to 300 x 400 (width x height), but the size don't match 3 x 4 cm, since the ruler (preferences/units/ruler) is set to cm an it is clear the 300 x 400 vector is smaller than 3 x 4 cm. Then, how could I set vector size to millimeters or centimeters?
b) I paste an image as new layer in the 10 x 15 cm canvas. The pick tool allows just scale the image, but I would like to obtain more control over raster image size. So, similarly to the vector issue, how could I set raster size (layer image into bigger 10 x 15 cm canvas) to fit 3 x 4 cm exactly?
I created a image (with blank background) with dimensions 640 x 480 (its my default working image).
I have copied photograph with dimensions 7300 x 4200 and pasted as new layer on the image (640 x 480). Obviously, the pasted photograph is bigger and it couldn't be showed totally. I am adjusting the size of the photograph manually, dragging and dropping its corner lots of time.
I tried to use "image => resize" / "image => canvas size". But it just act on my default image (640 x 480), not the photograph (even when its layer is selected).
So, is there any way of resize the photograph automatically to fit in the default image (640 x 480)?
I'm trying to enlarge a 6x8 inch black and white line drawing jpg file to about 36x48..(actually a little smaller so it will fit on a 3x4 cork board) How can I do this in Corel Paint (or Draw) so that we end up with clean (and blurry) lines ?
View 5 Replies View RelatedI am trying to paint a texture map in detail with Photoshop. the uv map is not ready, or it appears not to be.How do I separate/unwrap these uv's for easy texturing in Photoshop.
View 7 Replies View Related I am trying to turn my subjects skin into an almost snow-white without losing any details to his face (like lines, texture).
Now I think this could be accomplished using the "colored eye" technique but I feel like there is another way to do this with all the different tools and effects that would be easier.
I was wondering how I can make the PENCIL(I accidentally put brush) or something to paint 2 x 2 pixels? This is for some pixel art.
View 4 Replies View RelatedI am a beginner with PSP and would like to get some hints on the following two tasks:
- When I have two .JPG files, how can I form a PSPX3 picture with the contents of the two files arranged side-by-side which I can then store as a single .JPG file (this is the kind of picture I want to show at a presentation)
- When I have one .JPG file, how can I construct a PSPX3 picture that consists of the contents of this file (say, in the left half) plus a free space of the same size right adjacent to the loaded picture where I can add some text items?
Maybe even a suitable hint to where I find the steps to perform these tasks in the user manual (and how they are called in PSP terminology) would be a first step to find a solution (you need not copy the user manual!).
I saw where you can make DVD Menus that will work with DVD Architect using PhotoShop, can that be done with Photo X2?
View 2 Replies View RelatedI have a static picture, and a already-made gif from a friend.I want to put the animated gif INTO the static picture, and make it a new gif.
As in, the original animated gif remains animated and functions all the same, but basically now it is just part of a photo which remains still. For example, my specific idea currently is a photograph of my city I took, but I want to put the animated gif over a billboard that is in the photo.
What I want to do is cut part of a photo out and place it onto another background.
I have been trying to do this by: using the magic wand tool to cut out the background of the image I want to move. Then I save that as a .png file. I then open the image I want to use as a background and (after copying the .png image,) I paste the .png image on top of the background.
At this point, one of two things happens: I either get the first image on there with lots of backgrounds showing through faces, etc; or I get the image pasted onto the background but I get the box with the little grey squares and I cannot see the background through that. I have tried playing with the transparency of the background, but then it still blends through the original images.
I've got all these great digital backgrounds that came with my studio set up and danged if I've been able to use a single one. (I don't have photo shop because its above my head and I really don't have the extra cash for it right now.)
Im having problems blending photos together. Here are the steps that Im doing.
1. click on file+new+select image dimensions.
2. select images
3. click on first image hit selections, then select all
4. click edit, paste as new selection
once it paste, the picture is huge, how do I resize it to make it fit on the canvas I selected.
In the picture attachted there is a compostition I made through PhotoScape (I just have come from this software). How to do it in PaintShop X4. My traditional-old steps:
a) First I applied in each photo picture a picture frame (like a shadow).
b) Second I join all photo picture and logos in a big picture.
c) I inserted titles (people name) bellow each photo.
d) To conclude I applied a picture frame to the big picture (in PhotoScape this frame is called “shadow border”).
Just a comment: It seems Corel PaintShop has mostly “cartoon” picture frames. I tried to find out something like “PhotoScape shadow border” without success. Is there something similar available in PaintShop? Is it possible to add new picture frames to the PaintShop library?
Best way I can create writing in the center of this heart in the sand?
[URL]........
Trying to get the words Ocean City in 2 lines and have it look as close as possible to look like it was written in the sand (without me having to drive an hour to the beach and make one myself and photograph it) although it is tempting to do!
can this program make gifs at all and are they produced in high quality. I see a lot of people making gifs mainly from Photoshop, but thats not an option for me, so I was looking for a program that will give me the same results or close, at a cheaper price and easier to use. Can this program be the solution or I need to look elsewhere.
Also some of the things I'm considering is if the program can make split- screen gifs, edit gifs coloring, sharpness, brightness and so on, basically high quality gifs.
Something like this ;[URL]
