Paint.NET :: Making Cover For Horror Movie?

Jul 17, 2013

Wanna make a cover for movie? Needing it done. It's a horror movie.

View 1 Replies


ADVERTISEMENT

Photoshop :: What PPI/DPI Should I Use When Making A Movie In HD

Jun 24, 2009

I am making a movie in HD and am wondering either the PPI or DPI recommended.

View 9 Replies View Related

Photoshop :: Making A Magazine Cover

Sep 20, 2007

i have some wakeboard pictures and just for fun i want to make it look like its on the cover of a magazine. how can i get or cut the text from a wakeboarding mag cover and place it over my picture.

View 1 Replies View Related

Photoshop :: CS3 - Dvd Cover Making. Printing Comes...

Mar 14, 2008

I have been making a cover for a dvd. I created a new project with the dimensions of the dvd cover which is: height: 18.2 cm, width: 27.2 cm. I finished the cover, and am now having difficulty printing.

I first tried flattening the image, creating a bmp, and printing with XP's photo printing wizard, but it came out that the height was ok - a little off, but the width was nearly 2cms too short. I tried just printing from photoshop, but it tried scaling it down. And, by the way, I am new to Photoshop CS3!

View 2 Replies View Related

GIMP :: Making Second Ebook Cover

Jul 8, 2012

I'm trying to make my second ebook cover with GIMP, The ebook is 'The Man in Black' by Stanley J Weyman, and the cover must be 600px wide by 800px high - this fits most readers.

I have cropped a monochrome image to show the head and torso of the Man, and scaled it to 280*400px - though I may want to make it bigger later depending on how the cover looks.

I want this image to be on a black background, with the book title above the image and the author's name below - both in white.

The next step, I think, should be to make a layer 600*800px which I'll color black, then put the book title towards the top of the layer / image and the author's name towards the bottom.

Then I think I'll need to make a transparent area in the middle of this layer just big enough for the Man image to show through, then put the Man image on another layer, then combine the layers.

View 2 Replies View Related

Illustrator :: Making Book Cover - Transparency And Blend Modes?

Aug 25, 2013

Well, I'm making a book cover...I have a background on top of which i put a label which will contain the name of the book but will "cut out" through the label to show the background.how would I do this in Illustrator, but with a actual object and a font instead of erasing out of a rectangle on an iPhone.

View 4 Replies View Related

Paint.NET :: Printing DVD Cover

Mar 28, 2010

I have several Dvd Covers that I would like to print, however I have had issues getting the correct size. I use Paint.NET Regularly .

I am currently running windows 7 and every time I print a dvd cover the are just smaller than the regular dvd cover size(Before on XP I was able to print them no problem).

No matter what program I use I end up having to print using Microsoft photo printing wizard. I have tried many different configurations and I get two issues.

1. When I have the settings on default I print the cover and It fully prints, but the height is just too small for my dvd case, and it isnt quite wide enough as well.

2. When I choose 8.5x11 Borderless (Assuming It would print correctly, but after it prints for a while It has been enlarged to the point where it runs off the page, and it is WAY too large, even for a dvd case.

I used to be able to print them correctly using paint, but I have no clue how I was able to.

I am using standard letter paper 8.5x11 in., the same size I correctly printed them out on before.

Can I use Paint.NET to fix this issue, or should I use a different program,

View 8 Replies View Related

Lightroom :: Cover Layout That Spans Your Entire Back / Front Cover With Blurb?

Aug 23, 2012

I am building my second book with Blurb, this time with LR4
 
it's going to be a small square and for the back and cover, I have built a file with photoshop and when I drop it to first page, no way I can "slide" it to cover the entire back+ cover
 
see my problem [URL]

View 2 Replies View Related

Photoshop :: How To Get Paint To Cover Whole Diameter

Oct 23, 2013

How do I get the paint to cover the whole diameter of the cursor? I've tried going to the prefs.

View 17 Replies View Related

Paint.NET :: How To Make A Book Cover

Jan 27, 2013

what plugins are used in this video?
 
[URL].......

View 13 Replies View Related

Paint Shop Pro :: Creating DVD Cover From Scratch?

Mar 21, 2013

All i want to do is create a dvd cover.

(A) Put in dimentions of dvd cover. FILE>NEW..etc It asks me then; RESOLUTION PIXAL/CM ( what does this mean???? obviously i want the best output possible..but i have a range of photos taken from various cameras for my dvd cover to include...i dont know what resolution they are all sitting at? What do i do? Max it out...to the highest..or the lowest?

And what the..is the choice of RASTER/ VECTOR background?? I just want a plain background to then place into a range of different sized photos.

(B) I can cut out a photo etc...but how do i place some photos onto the blank dvd cover? Everytime i click on an image..it covers the previous? and i cant seem to resize to whittle it down..to work with it...can find my original dvd cover? Is this layer? If so...do i put the blank dvd cover on layer 0?? or layer 1? Then what? I bring in a photo onto ...layer 0 or 1?

(C) Finally, Rulers...despite opting for dimensions in cm or indeed millimeter for my dvd cover...i just want to mark out exactly the front and back and side of it. How do I drag / get a rular to mark this out.

View 8 Replies View Related

Paint.NET :: Changing Text On Book Cover?

Feb 21, 2012

I have a Book Cover for an ebook that I may change. So there is some text I want to replace.

Is there some way I can do this with Paint.Net.

View 6 Replies View Related

Paint.NET :: Make Pixel Art For Facebook Cover?

Jun 19, 2013

Alright, so I want to make pixel art for a facebook cover, and I want to make the pixels large.

Question: How do I take the resolution down and keep the print size the same? I want to just be able to click and have a large pixel form.

View 1 Replies View Related

Corel PHOTO-PAINT X4 :: Creating Animated GIF With Movie

Nov 15, 2012

I am trying to animate a small thing. A smiley face which bounces up and down. I have set it all up etc. but when I preview nothing happens. On the right hand side, in the movie docker, it shows the correct frames, (all 6 of them).

In the main window, when I click through the 6 frames, they are all frame 1.  And when I press play, nothing happens (it says processing in the bottom corner, and keeps filling up the bar and starting again (assuming it is playing, but playing the same frame repeatedly?)

Not sure what to do with it? When I saved it, and opened the file, it kind of worked, all though frame one stayed there throughout the animation, the others did appear and do their thing, just behind frame one.

View 3 Replies View Related

Paint Shop Pro :: Preview Of Text In Movie In Blank / Black

Aug 25, 2011

i found PSP3 to be WAY over my head, and uninstalled it,, only now, using windows movie maker ][5.1] i find the "preview" of text in video is blank. is there some thing about PSP that would have caused this? i reinstalled PSP and it and windows movie maker worked ok, then i removed psp again and the problem has returned. the preview of text in movie in blank/black..in the windows movie maker. the text DOES go on,,

View 3 Replies View Related

Paint.NET :: Ebook Cover - Shrinkage Of Image For Preview Purpose

Aug 31, 2012

I've recently gotten into the craze of writing an ebook for the Amazon Kindle and decided to design my own ebook cover. The biggest problem I've come upon is the shrinkage of the image for preview purposes when people are browsing the Kindle selection.

The original size of my image is 2000 x 1200 (the recommended 1 to .6 ratio for Kindle covers). The book looks great in the original size, but when shrunk down to about 100 x 60, the text becomes pixelated. I've tried the various font styles (mostly sticking to the sans-serif), but all have the pixelated look. I use the built-in text tool for paint.net. I tried making the text as larger as possible across the book cover, but the text still looks pixelated.

Is there a plugin for text that is used for ebook covers to 'merge' them into the cover images to blend in more and not look so sharp?

Here are two versions of my ebook cover. The Original Size can be found here.

Shrunken Size:

View 13 Replies View Related

Paint.NET :: How To Make Grey Pixel Cell Border Around EBook Cover

Feb 17, 2013

I'm making an ebook cover with a white background and I want to put a grey pixel cell frame around it but I don't know how to do it. I'm only getting started with getpaint.net.

View 3 Replies View Related

Paint.NET :: Making Brush Paint 2 X 2?

Mar 10, 2012

I was wondering how I can make the PENCIL(I accidentally put brush) or something to paint 2 x 2 pixels? This is for some pixel art.

View 4 Replies View Related

Paint Shop Pro :: X3 - Making One JPG From Two?

Dec 6, 2013

I am a beginner with PSP and would like to get some hints on the following two tasks:

- When I have two .JPG files, how can I form a PSPX3 picture with the contents of the two files arranged side-by-side which I can then store as a single .JPG file (this is the kind of picture I want to show at a presentation)

- When I have one .JPG file, how can I construct a PSPX3 picture that consists of the contents of this file (say, in the left half) plus a free space of the same size right adjacent to the loaded picture where I can add some text items?

Maybe even a suitable hint to where I find the steps to perform these tasks in the user manual (and how they are called in PSP terminology) would be a first step to find a solution (you need not copy the user manual!).

View 1 Replies View Related

Paint Shop Pro :: Making DVD Menus

Aug 3, 2011

I saw where you can make DVD Menus that will work with DVD Architect using PhotoShop, can that be done with Photo X2?

View 2 Replies View Related

Paint.NET :: Put Already-animated GIF Into Still Picture (making New GIF)

Feb 9, 2013

I have a static picture, and a already-made gif from a friend.I want to put the animated gif INTO the static picture, and make it a new gif.
 
As in, the original animated gif remains animated and functions all the same, but basically now it is just part of a photo which remains still. For example, my specific idea currently is a photograph of my city I took, but I want to put the animated gif over a billboard that is in the photo.

View 5 Replies View Related

Paint.NET :: Making Transparent Images?

May 22, 2011

What I want to do is cut part of a photo out and place it onto another background.

I have been trying to do this by: using the magic wand tool to cut out the background of the image I want to move. Then I save that as a .png file. I then open the image I want to use as a background and (after copying the .png image,) I paste the .png image on top of the background.

At this point, one of two things happens: I either get the first image on there with lots of backgrounds showing through faces, etc; or I get the image pasted onto the background but I get the box with the little grey squares and I cannot see the background through that. I have tried playing with the transparency of the background, but then it still blends through the original images.

I've got all these great digital backgrounds that came with my studio set up and danged if I've been able to use a single one. (I don't have photo shop because its above my head and I really don't have the extra cash for it right now.)

View 1 Replies View Related

Paint Shop Pro :: Making A Blend With 2 Images

May 27, 2011

Im having problems blending photos together. Here are the steps that Im doing.

1. click on file+new+select image dimensions.
2. select images
3. click on first image hit selections, then select all
4. click edit, paste as new selection

once it paste, the picture is huge, how do I resize it to make it fit on the canvas I selected.

View 3 Replies View Related

Paint Shop Pro :: Making Picture Composition

Dec 9, 2011

In the picture attachted there is a compostition I made through PhotoScape (I just have come from this software). How to do it in PaintShop X4. My traditional-old steps:

a) First I applied in each photo picture a picture frame (like a shadow).

b) Second I join all photo picture and logos in a big picture.

c) I inserted titles (people name) bellow each photo.

d) To conclude I applied a picture frame to the big picture (in PhotoScape this frame is called “shadow border”).

Just a comment: It seems Corel PaintShop has mostly “cartoon” picture frames. I tried to find out something like “PhotoScape shadow border” without success. Is there something similar available in PaintShop? Is it possible to add new picture frames to the PaintShop library?

View 5 Replies View Related

Paint Shop Pro :: Making Text In Sand

Aug 8, 2012

Best way I can create writing in the center of this heart in the sand?

[URL]........

Trying to get the words Ocean City in 2 lines and have it look as close as possible to look like it was written in the sand (without me having to drive an hour to the beach and make one myself and photograph it) although it is tempting to do!

View 2 Replies View Related

Paint Shop Pro :: Making GIFs For Tumbrl?

Feb 22, 2012

can this program make gifs at all and are they produced in high quality. I see a lot of people making gifs mainly from Photoshop, but thats not an option for me, so I was looking for a program that will give me the same results or close, at a cheaper price and easier to use. Can this program be the solution or I need to look elsewhere.

Also some of the things I'm considering is if the program can make split- screen gifs, edit gifs coloring, sharpness, brightness and so on, basically high quality gifs.

Something like this ;[URL]

View 4 Replies View Related

Paint.NET :: Making Certain Portions Of Image Glow?

May 16, 2012

Making certain portions of an image glow. Because I am the most artistically capable of my peers, I was chosen to make a section T-shirt for my school's band's saxophone section. I have the front done, but to do back. The idea is have a slightly obscured saxophone with the key holes and bell glowing. Thing is, how to do it. I tried messing around with the glow effect in version 3.5.4, but that affects the entire images.

View 1 Replies View Related

Paint.NET :: Making Normal Maps For Textures?

Dec 4, 2009

I like to know how do you go about making normal maps for textures

View 3 Replies View Related

Paint.NET :: Making Transparent Stamps For Acrobat

Sep 16, 2011

I don't have photoshop and all the instructions say to save the transparency directly to pdf in photoshop. Saving to gif, tiff, png and opening as a stamp in acrobat or copy and pasting the transparency from paint.net into acrobat always removes the alpha channel.

View 2 Replies View Related

Paint.NET :: Making Three Figures Of Same Height Into Different Heights

Nov 22, 2012

In other words, I have three men (or little pigs or whatever )the same medium height, but I want to make one smaller and one larger than medium.

Is there a way to do that, for a newly proud that she can even move pixels now!?

View 8 Replies View Related

Paint.NET :: Making One Character In A Group Larger?

Nov 30, 2012

I'm sure for most of you this is a walk in the park, but for me--is there a simple way to make one character in an image larger than the rest?

View 16 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved