Paint.NET :: Printing DVD Cover
Mar 28, 2010
I have several Dvd Covers that I would like to print, however I have had issues getting the correct size. I use Paint.NET Regularly .
I am currently running windows 7 and every time I print a dvd cover the are just smaller than the regular dvd cover size(Before on XP I was able to print them no problem).
No matter what program I use I end up having to print using Microsoft photo printing wizard. I have tried many different configurations and I get two issues.
1. When I have the settings on default I print the cover and It fully prints, but the height is just too small for my dvd case, and it isnt quite wide enough as well.
2. When I choose 8.5x11 Borderless (Assuming It would print correctly, but after it prints for a while It has been enlarged to the point where it runs off the page, and it is WAY too large, even for a dvd case.
I used to be able to print them correctly using paint, but I have no clue how I was able to.
I am using standard letter paper 8.5x11 in., the same size I correctly printed them out on before.
Can I use Paint.NET to fix this issue, or should I use a different program,
View 8 Replies
ADVERTISEMENT
Mar 14, 2008
I have been making a cover for a dvd. I created a new project with the dimensions of the dvd cover which is: height: 18.2 cm, width: 27.2 cm. I finished the cover, and am now having difficulty printing.
I first tried flattening the image, creating a bmp, and printing with XP's photo printing wizard, but it came out that the height was ok - a little off, but the width was nearly 2cms too short. I tried just printing from photoshop, but it tried scaling it down. And, by the way, I am new to Photoshop CS3!
View 2 Replies
View Related
Feb 24, 2007
Someone said that photoshop causes blurring when used for text in the printing stage on a cd cover.
How do I check to see if jpg images have been saved at a resolution of 300 dpi?
What if my original jpg image resolution is less than 300 dpi and I require 300 dpi; Is it possible to resave them to a smaller image size and in doing so increase the dpi?
What if a jpg image says it is ?.jpg @ 25%RGB? and I am supposed to save the files in CMYK; What is this ?Mode? setting and can it be changed through resaving the jpg somehow, or is it changed to CMYK when you open it in Photoshop and choose CMYK in the'Rasterize Generic PDF Format' window?
I am using XP and Photoshop 7
View 3 Replies
View Related
Aug 23, 2012
I am building my second book with Blurb, this time with LR4
it's going to be a small square and for the back and cover, I have built a file with photoshop and when I drop it to first page, no way I can "slide" it to cover the entire back+ cover
see my problem [URL]
View 2 Replies
View Related
Oct 23, 2013
How do I get the paint to cover the whole diameter of the cursor? I've tried going to the prefs.
View 17 Replies
View Related
Jan 27, 2013
what plugins are used in this video?
[URL].......
View 13 Replies
View Related
Mar 21, 2013
All i want to do is create a dvd cover.
(A) Put in dimentions of dvd cover. FILE>NEW..etc It asks me then; RESOLUTION PIXAL/CM ( what does this mean???? obviously i want the best output possible..but i have a range of photos taken from various cameras for my dvd cover to include...i dont know what resolution they are all sitting at? What do i do? Max it out...to the highest..or the lowest?
And what the..is the choice of RASTER/ VECTOR background?? I just want a plain background to then place into a range of different sized photos.
(B) I can cut out a photo etc...but how do i place some photos onto the blank dvd cover? Everytime i click on an image..it covers the previous? and i cant seem to resize to whittle it down..to work with it...can find my original dvd cover? Is this layer? If so...do i put the blank dvd cover on layer 0?? or layer 1? Then what? I bring in a photo onto ...layer 0 or 1?
(C) Finally, Rulers...despite opting for dimensions in cm or indeed millimeter for my dvd cover...i just want to mark out exactly the front and back and side of it. How do I drag / get a rular to mark this out.
View 8 Replies
View Related
Jul 17, 2013
Wanna make a cover for movie? Needing it done. It's a horror movie.
View 1 Replies
View Related
Feb 21, 2012
I have a Book Cover for an ebook that I may change. So there is some text I want to replace.
Is there some way I can do this with Paint.Net.
View 6 Replies
View Related
Jun 19, 2013
Alright, so I want to make pixel art for a facebook cover, and I want to make the pixels large.
Question: How do I take the resolution down and keep the print size the same? I want to just be able to click and have a large pixel form.
View 1 Replies
View Related
Aug 31, 2012
I've recently gotten into the craze of writing an ebook for the Amazon Kindle and decided to design my own ebook cover. The biggest problem I've come upon is the shrinkage of the image for preview purposes when people are browsing the Kindle selection.
The original size of my image is 2000 x 1200 (the recommended 1 to .6 ratio for Kindle covers). The book looks great in the original size, but when shrunk down to about 100 x 60, the text becomes pixelated. I've tried the various font styles (mostly sticking to the sans-serif), but all have the pixelated look. I use the built-in text tool for paint.net. I tried making the text as larger as possible across the book cover, but the text still looks pixelated.
Is there a plugin for text that is used for ebook covers to 'merge' them into the cover images to blend in more and not look so sharp?
Here are two versions of my ebook cover. The Original Size can be found here.
Shrunken Size:
View 13 Replies
View Related
Feb 17, 2013
I'm making an ebook cover with a white background and I want to put a grey pixel cell frame around it but I don't know how to do it. I'm only getting started with getpaint.net.
View 3 Replies
View Related
Mar 15, 2013
There's a great divide between illustrators and engineers which is showing up in the difficulty of programming 3D printers using an illustration source. I would like to produce bas relief images from digital engravings and photographs but I've encountered several problems.
Problem one is finding a program which looks at an illustration and allows the user to determine where to bend and contour the surface and produces a file which a 3D printer can interpret.
Problem two is that all the present 3D devices are designed to make prototype devices. For bas relief, the Z dimension need only be an inch or two but height and width need to be greater than most 3D machines allow at present.
I raise this subject here because I wonder if Corel are alerted to the idea of producing interpretive 3D software. If the software existed, I feel sure that the hardware would quickly follow.
View 4 Replies
View Related
Nov 26, 2013
I just purchased a new HP photosmart 7520. When I am in print layout, with the printer settings on borderless printing, I still get a border. This doesn't happen on every template - Avery #3268, 3266, new blank sheet, etc. Seems to work properly when using business cards, How do I get it to work properly with no border
View 1 Replies
View Related
Apr 26, 2012
I know there is a thread all about DPI and what not but to be honest I have never truly understood it. I am working on some photos for my mum for mothers day in a couple of weeks and have 2 ideas the first is some photos she took up the Whanganui river I want to edit them all like so ( with different NZ iconic images in each one there will be four in total ) and then print them out and put them in a frame I will be using a shop service for this as I do not have a working printer.and the other idea is the same thing but for her cats like so.
how the NZ ones will look.What I need to know if I print these out at 10'' x 8'' or 6'' x 4'' what size should the originals be ? The native photos are 2048x1536 but normally I have to resize these to 800x600 otherwise my comp goes very slow.
View 12 Replies
View Related
Nov 6, 2012
My printer allows double sided printing. I opened two images in PDN and wanted to printed on one piece of paper (on both sides) and I cannot figure out how to this. Both images fit one page.
View 3 Replies
View Related
Mar 3, 2011
Is there a way to print .pdn, jpg. bmp...etc direct from Paint.Net without having XP's photo printing wizard "working"?I would like to print my image with the original size.
View 2 Replies
View Related
Feb 28, 2009
any instructions or settings in Corel Draw when printing to a CO2 laser?
View 5 Replies
View Related
Apr 21, 2011
I use the graphics section of PSP X3 pro for architectural drawings. Recently when I tried to print a drawing from the *.psp image file all but one of the text objects went missing.
I finally converted the file to *.jpg and was able to print it with all its text. I haven't encountered this problem before and the file is rather small (310KB). Relying on the *.jpg file for printing is not a good option for me since in more complex drawings the *.jpg version is degraded.
View 3 Replies
View Related
Sep 7, 2011
I have Paint Shop Pro PHOTO XI. I want to shrink a photograph so when it's printed on a standard 6x4 print the picture only takes up a part of the print. Is this possible? If so, how do I go about it?
View 4 Replies
View Related
Mar 30, 2011
I see a "new printing UI" is scheduled for v4, so maybe this will be included in that anyway, but a quick request: it'd be great of PDN would honour the default paper size when printing. I currently need to change from Letter to A4 (which isn't even on the "most popular" list, so it needs a further click to choose "other" first), despite this being the default paper size for the printer selected.
Either using the default paper size of the selected printer, or failing that, remember the previously selected paper size in PDN would save a good amount of frustration for those of us in Europe where A4 is the usual paper size ;-)
View 3 Replies
View Related
Aug 14, 2013
I just printed out some PNG images on A3 paper, and then someone told me TIFF is a better format to print images, so if I go in PaintNET and convert the image to TIFF, and print it out, will it look slightly with higher quality than the PNG print out?
And yes, the image is 300dpi, no worries about all that pixels per inch stuff, it does not matter, it's all about format.
View 3 Replies
View Related
Jan 24, 2012
I'm having a problem printing out a black and white photo. This is the first time I'm tring to print from PSP 3. When the photo is printed out, instead of looking like what I did in PSP 3, it looks like it was imbossed and black pencil. I have done a search and played around with PSP 3 with no luck..Even reinstalled PSP 3. If I go to the photo file, both the saved and the original, and print it directly, they comes out near perfect, except for a purple tint in both. You do not see the purple tint in the photo when in PSP 3 or the saved file untill it is priinted out.
JPG
102 KB
773x1000 pixels original size
72 dpi 8 bit depth
Resolution 2
EXIF 0220
Off the internet
Canon PM 620 printer
Kodak paper
No error codes
PSP 13.00
View 2 Replies
View Related
Dec 18, 2012
I have managed to great a canvas size for A4 paper and managed to put 4 different photos spaced roughly equally around the page. The problem comes when printing, when the page is printed I get a 1cm margin down the left side of the paper every time even though the preview print does not show this 1cm margin.
View 6 Replies
View Related
Jan 6, 2014
I have created an image and would like to print as many copies of it as I can fit onto a single page from my printer (let's say A4 size). (My image is a logo that I am printing to water-slide transparency which is too expensive to waste one sheet per image). I can't seem to easily do this in Paint.Net (the options for contact sheet and wallet don't come out in quite the size I want). So I guess the best option is to save the file in another format (tiff, jpeg, PNG etc) and then copy it multiple times into another app like Word or PowerPoint, and then print from there. However my image has some transparent areas that I need to keep as transparent. How do I do this? Are there some image file formats that will retain the transparency? Likewise do word or PowerPoint support the transparent areas and print as such?
View 3 Replies
View Related
Jun 6, 2010
I scanned a photo in to be edited, once I edited it when it comes to printing it wont come out the same size. My printing options are all about different frame sizes to put the photo into.
So I tried creating a new document where I set the size in centimetres, but when it comes to print how come I cant seem to get the option to print that size.
View 8 Replies
View Related
Mar 3, 2013
Is there anyway to bring up a the printer dialogue box or tell the printer I need more than 1 print of the layout? It's time consuming to hit that printer button x number of times. I just had to print 50 pages of the same layout today and it would be so much easier to let the printer print the 50 copies instead of sending 1 page 50 times to the printer.
View 1 Replies
View Related
Feb 26, 2012
I created a work in PSP using raster + vector. The image is configured to A3 paper dimensions.
I want to send it to be printed in an external store. With CorelDraw, it is just sending the CDR file (with vector in curves) and the file by itself shows A3 paper dimensions when opened. So, the guy who will print just make the job, without any question!
It seems to me that files like PNG or JPG can’t be handled as CDR file by the person who will receive the file. So, what should be the better PaintShop file format to send to external store to be printed in the way I mentioned?
View 3 Replies
View Related
Mar 9, 2012
I am new to Corel PaintShop Pro X4, and am attempting to enter text into a template I found online. I was successful in entering the text, and when I try to print, the print preview shows a template full of text. However, when the page prints, only some of the text is there! The text that prints doesn't even seem to correspond with the layers. I tried to save the file as another type of image to print it (all text shows then with no problem), but it is not a very sharp image. I have searched the manual, but am not finding an answer. This is time sensitive
View 2 Replies
View Related
Jun 3, 2011
In a nutshell - I am a seamstress attempting to make a pattern. Well, I have made the pattern - drawn it out on a large sheet of paper. I have manually "cut" it into letter-sized parts and scanned those parts onto my computer (with hash marks so that the parts can be matched back up to make the larger whole pattern).
I have spent a lot of time redrawing the lines in paint.net so they are neat and clean and more even. But then I went to print them and sizing is totally messed up and I am just not able to get my brain around this sizing thing. I need to be able to send these files to customers so they can print them out, put them together and have a pattern.
So, in effect, I have a large image that I want to print in puzzle pieces but they must maintain their *real* *life-sized* size. I'm attaching one of the individual files. What I need to do to it to make it be 8.5" x 11".
View 4 Replies
View Related
Dec 25, 2012
I can scan and preview an b/w negative but it will not show up on the work screen after being scaned. I can scan a b/w neg and then reverse it to a positive for printing !!!!!!
View 2 Replies
View Related
