Paint.NET :: Increasing Font Sizes Past 1000 In Posters
Sep 2, 2013
I created some posters last year and I need to make them again this year. For some reason I'm not able to increase the font size past 1000.
I wrote down the instructions last year. The only thing I can't remember is how I increased the font to 2000. I can get the font size to 1000, but as soon as I increase it nothing shows up on the screen except the blinking cursor.
I'm using Paint.net 3.5.10 build 3.510.4297.28964 on windows 7. I have the image resolution set to 300.
I have also tried this same thing using the latest version of Paint.net on windows 8. I get the same behavior but I can't increase the font size past 900.
The file I created is too large to attach.
View 6 Replies
ADVERTISEMENT
Oct 10, 2013
using Paint for a few months with great results, but i'm having problems trying to get font sizes to fit a page i.e.A4, i set the canvas size dpi etc, but can't get for example the the letter H in Stencil font to fit to the page without selecting it and stretching it manually which makes it not look correct, the font size won't go past 288.
View 6 Replies
View Related
Feb 22, 2012
How do I write a script to change the font sizes of ALL text in a vector layer?
View 10 Replies
View Related
Nov 8, 2012
I have this drawing file that has suddenly been growing larger and larger in size. There has not been enough information added to justify such a large increase:
Capture2.JPG
View 9 Replies
View Related
Dec 1, 2013
I have been revising some older blocks dating back to 2003 and earlier. What was a file size of 28KB increased to 127KB! In most cases the only change was converting text to an attribute. As a test I took a 2004 file and saved it - with no changes - to another name and the file size increased from 28KB to 124KB!!! That's an increase of over 4.4 times! Many of my 1998 - 2006 files are in the 26KB - 40KB range.
That's a bit much of an increase over several ACAD versions! Is there a way to reduce the file size? I did perform a complete Purge before saving. Have I missed some clever trick?
I am running ACAD Version 2014 with SP-1.
View 5 Replies
View Related
Aug 20, 2013
When trying to scale the print size, after clicking inside the scale box, the sizes just keep increasing, even though I never got a chance to enter anything.It just keep getting bigger and bigger. How do I turn this "feature" off?
View 3 Replies
View Related
Dec 19, 2013
How can i transform 1000 lines to 1000 polylines ?
View 1 Replies
View Related
Aug 11, 2013
I'm trying to design an a4 and a3 poster; and I'm looking for the dimensions to fill in to the canvas sizing tool....
I keep finding the dimensions but I'm confused as to what I am to have the resolution bar/ option set at? I want the posters dpi to be 300 or 400.
Also what size should the file be .mb wise?
View 4 Replies
View Related
Nov 14, 2012
I find myself in the unfortunate position of having to resize a lot of text by one point size. So I wanted to find the key command for decreasing the text size by 1 point. I found several things online that worked... except they decrease it by TWO points. Not one. They are:
Command Shift <
and
Command Shift .
Both work... except they decrease the font by 2 point sizes. How can I make it go down only ONE point size?
PS I'm using CS4. And I can't select all the text because I need some of it to stay as is... while reducing the size of other text. Oh, and I'm on an iMac.
View 4 Replies
View Related
Sep 7, 2013
I just upgraded to GIMP 2.8.4 for Mac after spending months using an older version. At the bottom of the image window are tips for using whatever tool one is currently using. Unfortunately, these tips are TINY! I can barely see them! Is there any way to increase their size via GIMP preferences?
Note that I am not very knowledgeable when it comes to editing program code so if this is required I will need specific step by step instructions.
EDIT: Additionally, I've noticed that image windows always stay behind the toolbox and layer windows. Is there any way to reverse the ordering? (So that image windows can move in front of the toolbox/layer window?) With multiple image windows open on a small screen I need all the space I can get.
View 7 Replies
View Related
Apr 15, 2013
I would like to be able to create a box around text that is able to resize when increasing/decreasing font.
My working solution is to create a text box with text then use direct selection tool to select the anchors and convert that into a shape, either a rectangle or rounded rectangle. This isn't bad since it allows an equal amount of space around the text but it does have problems. If the font size increases or decreases, the box remains the same. I have to use the Area Type Option to resize the box. Also, if I wanted to do this for lots of boxes then I have to select all of the individual anchors which will be time consuming.
View 1 Replies
View Related
Dec 1, 2011
I have been using Paint Shop Pro for around fifteen years now and have always been very happy with each new version. I tended to upgrade every other version and have been using X2 for the last couple of years. With the recent announcement of Corel's service pack to fix some of the problems of X4, I decided to upgrade.
I uninstalled X2 and rebooted ready to install my shiny new copy of X4. All went well until I tried to start it up. The splash screen appears and starts to load up the components but every time it gets to "Initializing Palletes" it crashes and I get the "Paint Shop Pro has stopped working" and the options to close or go online and check for a solution!
I've tried uninstalling it, repairing the install, and also uninstalling it using the RevoUnInstaller as recommended by df but it didn't work. I also tried installing SP1 to see if it worked but didn't.
I can't even get this thing to start up at the moment. I need it for a few projects I'm working on and am beginning to wish I had left well alone!
I'm also dreading trying to re-install X2 as I can see that having problems if X4 has screwed up any deep-seated settings.
View 3 Replies
View Related
Jul 3, 2013
If I'm creating a batch "text" for a number of files the strangest thing happens. I have to change 10 files all with the same or very close to the same pixel size. In this case 1024Lx . I want to insert a "copyright" text across the image. I create the action, that includes: text, text size of18pts and opacity. and then batch.
The resulting font sizes are very uneven. They are all show up in the individual files as 18 pt but some are invisiblley small some are gigantically large and some are just right. And my name's not Goldilocks. I've tried this on PS3 and PS6 with the same results.
View 17 Replies
View Related
Feb 20, 2013
I'm in a Photoshop document, and I'm working with two different text areas. Both area registering as 14px in size in the Type menu, and yet, they're radically different in size. One is tiny, whilst the other is at least twice, maybe thrice the size. Why is this happening?
I've checked there's no overlapping text areas and things like that, everything should be fairly normal, it just isn't.
I'm using Adobe Photoshop CS6 v13.1.2 x64 for Mac, running on a Macbook Pro Retina 1.83ghz and 8GB ram.
View 20 Replies
View Related
Mar 28, 2013
A client provided me with 100 dpi Photoshop files containing text. When I changed the file to 300 dpi, the type was slightly fuzzy. On closer examintation, I discovered that the type that was 11 pt was now reporting 3.7 pt after uprezing - but it was the correct new physical size.
I opened the same file in PS 5.5 and the font size was reported correctly and was not fuzzy.
Bug? Operator Error? This is all from Adobe Cloud.
View 5 Replies
View Related
Apr 15, 2013
Basically, I have one text size in the model space, say 20, and one text size in the paperspace, say 0.008. These are dramatically different. I assume that the reason is due to scale, because your model could be enormous etc, and therefore it makes sense to have such a small font size in the model space.
The problem I'm really having is that I use the same dimstyle in the model space as in the paper space because sometimes I will dimension in the model space and sometimes in the paper space.
View 9 Replies
View Related
May 9, 2011
I can't get past square one with Tanel's Color-to-Alpha plugin.
I'm trying to get this foreground image:
to look halfway decent on both of these backgrounds:
To complicate matters further, there'll be more backgrounds to come, too, certain to be lighter in color (homage paid to Murphy's Law).
I've tried combinations of settings all over the map, but nothing gets even close. The jagged edge just won't go away.
View 5 Replies
View Related
May 14, 2013
This problem of the font size being incorrect in the Character Palette is driving me nuts.
(Type Layer shows one size. Selected type shows another size. Single placed cursor shows another size...)
Is there a solution?
Seems like a major bug?
View 1 Replies
View Related
Sep 13, 2012
There is a ovelap happening in the centre. I am unable to change fonts or font sizes. Never faced this problem in 12 or X3.
The screen shots are attached for your reference.
Using this on Windows 7 Professional.
View 6 Replies
View Related
May 16, 2012
I have been using Xara for a very long time. I have recently started a side business generating signs and banners and continue to use Xara as my primary graphics editor, but I've discovered a tiny issue and I'm hoping there is some way around it. The Font Size live preview slider is limited (for some reason?) to sizes less than 32pt, and the font drop down list starts getting coarse after 24pt and tops out at 72pt sizes. Since most of what I'm doing involves text sizes larger than 72pt and much larger than the 32pt the slider allows, both of those options for adjusting font size have lost their usefulness.
Is there any way for me to adjust the values for the slider and/or for the drop down list to allow larger numbers? I realize I could use a scaling factor and layout my signs as a fraction of their intended size, but then I have hope to remember to change the scale when I import it into my sign cutting software or run the risk of wasting vinyl, so that would be my last choice.
Surely I can't be the only person who uses large text?
Also, any issues with exporting text into EPS and getting a change in the case of the text? If I export "This is Text" as an EPS file, when I import it into my sign cutting software, I sometimes get "tHIS IS tEXT", but if I import the same EPS into Xara it looks normal. Not sure if that is Xara or the sign cutting software (LXi Express Expert edition)... Until I figure that one out, I make sure to convert text to editable shapes before exporting it...
View 6 Replies
View Related
Jun 12, 2010
I am creating a restaurant menu which has a lot of different sized text. Is there a way to mass change the sizes of the fonts all in one go?I'd like to be able to reduce all the lines by 1pt in one go, is there a way to do that?
View 3 Replies
View Related
Jul 15, 2013
Sometimes Photoshop automatically change my font sizes to uneven numbers. For instance 12 pt changes to 11,98 pt. Why and what could be done to avoid this? Also XY positions of objects in Illustrator get changed to sligtly different numbers like 9,98 px.
View 5 Replies
View Related
Mar 27, 2012
I've been experimenting with large font sizes on a base image of 2000x3000 pixels. I've been using a basic white type face on a dark gray background and adjusting the lightness and contrast of the white color to different levels. Also, I created the type as as png first and then brought into Gimp. When the image is at full size, the type looks fine, but when I shrink the image down, say a quarter of the size, the edges of the fonts get very jagged and look like they're breaking up.
View 2 Replies
View Related
Sep 29, 2013
im writing text inside a shape and ive got that far ive even changed font sizes, now id like to write smaller text in the gaps between different font sizes. im using PSCS2.
View 9 Replies
View Related
Oct 28, 2013
I keep getting the error message "For the Photoshop UI to display correctly, open System Preferences, click Appearance, and turn off text smoothing for font sizes 8 and smaller." I go into preferences and into general but there is no setting to turn off text smoothing for a specific font. I'm in osx mavericks and all it says is "use lsd font smoothing when available" and when I uncheck it, the error message in photoshop still pops up.
View 8 Replies
View Related
Jul 14, 2007
through some difficulty I'm having in getting the leading (ie, line spacing) I want with artistic text, in CorelDraw 12? I have three lines of text, the first line of which has a font size of 20 pt, and the second and third lines having a font size of 13 pt. The default leading is greater between the first and second lines than between the second and third -- probably due to the font size difference. I would like to make the leading equal for all lines, regardless of font size, but can't figure out how to do that. "Format Text - Spacing - Lines" seems to offer leading only in relation to character height -- which automatically makes the leading between the first and second line larger (due to the larger font size used in the first line) than it is between the subsequent lines.
View 5 Replies
View Related
Jun 27, 2012
I'm baffled. I do 99.9% of my photo work in Lightroom and then export to jpg. On the rare occasion when I need to remove something from a photo (a fly or leash), I have been using PSP version 9 because I already have it.
However, this morning I opened an 8 Mb jpgs file, did my editing and just saved it (no save as or resizing), and now the file is only 2 Mb.
What the heck? [URL]....
View 2 Replies
View Related
Jan 8, 2012
version: PSPx4 SP1
OS: Win 7 Pro
When saving JPEGs, I seem to be getting wildly different resulting file sizes, depending on whether I've used Save or Save As. Case in point:
original file size from camera: 6194 KB
Save / Standard encoding / compression factor 2: 1875 KB
Save As / Standard encoding / compression factor 2: 5184 KB
Save / Lossless encoding : 1875 KB
Save As / Lossless encoding: 7235 KB
It seems to me that with x2 (my previous version), I could set the low compression factor, and the resulting Save file would actually be larger than the original. I want to be able to save with minimal compression (but I don't want to mess with TIFFs), and I need to know if I should now be using Save As instead.
Is this as designed, is it my imagination...what's going on?
View 14 Replies
View Related
Oct 29, 2013
how I can see if some .ico files are embedded with multiple sizes? I used the .ico plug-in and selected to embed all sizes, but I am not sure if this works. I'd like to be able to confirm it.
View 1 Replies
View Related
Jan 7, 2014
I am doing an e commerce page selling fairly traded products or eco things. obviously i need a logo and company name, which i am working on right now. this needs to go on a banner. the other things i'd like to have done are company statement "about us" terms and conditions postage prices and times rescheduled payment options Newsletter options.
View 2 Replies
View Related
Aug 11, 2012
How can I add additional sizes to the pulldown window i would like to add some sizes other than the standard photo sizes listed. I had this setup in X2 but I need a refresher on how to make a size and save it to the pulldown menu. This is an easy process in Photoshop elements but not in PSP X4
View 1 Replies
View Related
