How can I add additional sizes to the pulldown window i would like to add some sizes other than the standard photo sizes listed. I had this setup in X2 but I need a refresher on how to make a size and save it to the pulldown menu. This is an easy process in Photoshop elements but not in PSP X4
View 1 RepliesSometimes I'm getting photoshop files with hundreds of layers.
I'm really happy that I'm able to open them in Paint.NET.
But because of the amount of layers it is sometimes difficult to figure out which detail is on which layer.
And to switch off layers up to the point that only the layer in question is left is little bit painful.
Proposal:
Add an additional button at the bottom of the layers window.
If the button is selected then only the active layer is visible in the main window and not a merge of the visible layers.
You may then activate one layer after the other to check the content.
Maybe if the button is selected then this could overwrite the visiblity attribute of the layer temporary.
I'm baffled. I do 99.9% of my photo work in Lightroom and then export to jpg. On the rare occasion when I need to remove something from a photo (a fly or leash), I have been using PSP version 9 because I already have it.
However, this morning I opened an 8 Mb jpgs file, did my editing and just saved it (no save as or resizing), and now the file is only 2 Mb.
What the heck? [URL]....
version: PSPx4 SP1
OS: Win 7 Pro
When saving JPEGs, I seem to be getting wildly different resulting file sizes, depending on whether I've used Save or Save As. Case in point:
original file size from camera: 6194 KB
Save / Standard encoding / compression factor 2: 1875 KB
Save As / Standard encoding / compression factor 2: 5184 KB
Save / Lossless encoding : 1875 KB
Save As / Lossless encoding: 7235 KB
It seems to me that with x2 (my previous version), I could set the low compression factor, and the resulting Save file would actually be larger than the original. I want to be able to save with minimal compression (but I don't want to mess with TIFFs), and I need to know if I should now be using Save As instead.
Is this as designed, is it my imagination...what's going on?
How do I write a script to change the font sizes of ALL text in a vector layer?
View 10 Replies View RelatedOn my zoom toolbar the command 'Fit to window' is faded out and does not function. I have set my window preferences to allow this functio yet it does not work. I want my rulers to fit to the image.
View 6 Replies View RelatedI have been using PSP since it was free shareware so I'm rather familiar with it. I just installed the PSP X4 14.1.05 When I open an image in the "edit" area and have the move tool chosen the image goes to "Fit image to Window" and both "Fit window to image" and "Fit Image and Window to Screen" are grayed out. I have tried the preferences and all else I can think of but can't get the window to fit to the image as it always has so I can be viewing several images at a time and working with them. I did try reinstalling. This is a Vista machine.
View 3 Replies View RelatedI have used PSP since version 2, so have been at it for awhile. Just upgraded to 6, as I was using version 4.
The problem I have is when I am in the edit area, and have a photo on the screen I use my mouse wheel to enlarge or shrink depending on my needs. The old version the windows box around image would also resize with image. I have attached a few images. I normal could fix this in the settings, but for some reason the window will not follow the image size as I enlarge or shrink? It does when I actually resize image, but I need this to do that when I am just using mouse wheel to make bigger or smaller on my screen.
How do I minimize one picture, in order to view two pictures is the same screen?
More details...In my previous version of PSP, when working on a photo, the tab at the top for the photo had the following options: Minimize ( _ ), Maximize ( [ ] ) and Close ( X ), similar to the options found in the upper right corner of most windows.
However, in X5, the picture window/photo tab only has the Close ( X ) option and no Minimize ( _ ) or Maximize ( X ) option.What am I missing or am I just daft?
I found being able to minimize multiple photos in the same window useful when pasting/cloming one image over another.Or, if I have multiple, yet very similar images, determining which is best without having to tab back and forth.
How do I remove the ad nag window from Corel in PSP X2?
View 3 Replies View RelatedI am not sure how this happened, but using PSPX3, when i need a new layer, the dialogue window is way to the top. The values and all are accessible but when i am doing live presentations or recording tutorials, this is an annoyance. It is so high that i cannot grab the top of the window and pull it down. It is only for that one dialogue window and only for that one PSP version.
I tried resetting the workspace to default, i tried reloading an old workspace, but that one stubborn dialogue window is still there on top.
I tried changing the screen resolution temporarily to see if i could "grab it" to move it back down, but it still is "ungrabbable".
Is it possible to delete/add to/rename folders listed in the Computer tab of the left pane of the Manage window?
View 3 Replies View RelatedI don't think that my PSP X5 (or X4) is presenting the images the way the tab had intended. I've done several complete re-installs and the remainder of the program seems to be working, except for the Manage tab. I can see the images displayed in the tray portion of the window and the highlighted image name shows above the large preview window, however there is no image in the preview window.
The area becomes populated with images if I switch to the Thumbnail view, but the small preview window palette is blank. If, while in the Preview mode if I click on one of the effects, the effect is created in the tray. Another thing that I've noticed is if I use the Magnifier tool in the empty area (where the preview should be) I can actually see the magnified image in the tool.
I have a folder where all of my photo and graphic files are stored. It does not show in either the collections or the computer pages of the navigation window. I've tried the "add folder to collection page" shown on the online help site but It doesn't work. How do I add the folder?
View 14 Replies View RelatedIn PSP X4, Edit screen, Organizer.
If you place your cursor over a thumbnail in the organizer thumbnail, a small window pops up with file name, ISO, shutter speed, etc.
Is there a way to change the data that appears in this popup window? Or, is there a way that info can be added to the file name that appears below the thumbnail?
I'm specifically looking to add the file dimensions in pixels. Currently, in edit mode, the only way is to open each image and click on INFO.
I decided to go ahead with the upgrade at $29 and then immediately installed the SP1. Well now I have an issue that I didn't have before. When I use the scroll wheel to zoom in and out the window does not resize anymore along with the image itself (not using tabbed mode), there are settings in preference just for this type of action so the window should resize with the image while zooming if the settings are checked properly. I did a reset and reinstall without any results. Of course the reinstall includes the updated version now so I can't be sure if the SP1 is the cause or not.
The only thing different since my free trial period is I updated Windows 8 - 8.1 and installed the SP1. Any issue with or without W8.1 or after installing SP1?
In X4 I could set the pallettes I wanted (layers and History) to a docked position on the RHS. With X6 the pallettes cover the RH part of the window and the image, with the opened image centred on the whole screen so that the RH part is cut off. It can't be centred within the area visible when the pallettes are open. This gives a smaller visible image if the whole image is in view. This is a serious issue, which X4 handled ok ! I've tried all the options but cannot get X6 to behave like x4
View 3 Replies View RelatedI am using Paint Shop Pro X5 Ultimate.The Preview Window of the Manage Tab seemed to be displaying photos oddly - the photo wasn't filling the preview window (it was leaving an area around the bottom and right-hand side of the photo). At first I thought it was just the zoom setting, so I zoomed in. However, I have now used several features of the software that seem to show that the Preview Window (only on the Manage Tab) is incorrectly displaying the preview.
The problem became further evident when I used the Find People feature of Paint Shop Pro to locate the faces and tag several people, however the position of the tags are as if the Preview Window is filled by the photo. I have attached a screenshot that shows that the tag for the person in the bottom right-hand corner of the photo has her tag positioned off the photo (outside of the border of the photo) to the bottom and right of the photo even though it was automatically placed by the software. The position of the tags for the people in the photo are all offset slightly to the right and down and would be correct only if the photo was displaying correctly in the Preview Window.
I have tested uploading the photos to Facebook and the tags appear correctly once on Facebook. If I manually tag the faces as they appear on the Preview Window, the tags are incorrectly placed once the photo has been uploaded to Facebook (they appear up and to the left of where the face is positioned in the photo.
I have tried resetting the preferences and turning off some display features of Microsoft Windows, but I have seen to changes in the Preview Window.
Properties of your source files (format, file size, where did you get it?) The example photo was taken in .jpg format using a Nikon D3100 and 18-200mm Nikon DX lens, though this affects my entire photo collection taken on several different cameras and in several different formats (including RAW).
What devices are involved and their mode of connection? The files were transferred directly from the camera to the computer using a USB cable. Project Properties:I was using the Manage tab to sort photos and tag people using the Find People feature and also tried manually tagging faces.
Just recently, upon closing PSP x5, a message window pops up, the title area usually references using the e-learning center or "Explore more ways to learn and love photography", but the window itself is empty except for the message "Do not display this message again" with a checkbox and a Close button. The Close button does not work, nor does the red X close window button. I have to go into Task Manager to finish closing the program.
I'm on a Windows 8 machine and this just started happening after months of use.
The title just about says it all. I usually edit in Full Editor mode, but normally there is an Explorer-like ribbon running across the bottom, much like the one in Express Lab. I opened PSP ProX3 today and it was gone. I'm guessing it disappeared when i did some editing for my daughter in a non-standard (for me) mode.
How do I get it back? I swear I have hunted and even RTFM'd.
I have a student version of revit 2014 and all my sizing, setting out and dimensions are coming in at feet and inches. I have found out how to convert this to mm but when I load in windows and doors, all the sizes of these are in feet and inches. How to change the door and window sizes to mm so that I know what size they are.
View 2 Replies View RelatedI am working on creating various standard sized window elevations using dynamic blocks. Each window elevation needs to have text underneath it that tells you the unit size of the window. While I have successfully created all the various elevations using dynamic blocks I can't figure out how to make the text appear to change with the various window unit sizes. for instance I have a small window that has text underneath showing 1818 (18"wide x 18"high). I need text to change to say 1820, 1824, 1830, etc. I can get the 1818 text to stay centered under the elevation as the window gets wider/higher but that is it.
View 9 Replies View RelatedSo I am working on this document and it has silver background. I go to print preview (Photoshop cs3 and cs4 on Vista) and I get color looking more like bronze looking but when I do print, it comes out just like it should (in working mode which is Monitor RGB with Proof colors checked).
This setting is the only one I've used to make sure image/psd looks exactly like what it should when printing. I tried the default Working CMYK with and without Proof colors but it's still showing me the bronze look instead of silver. I've looked on the net and no exact easy fix for this was found. I really really appreciate any help.
Another simple question is regarding size. I'm working on a document size of 17.5 x 8.7 inches and the actual Banners will be printed at size 175 x 87 inches (5 banners each at 35inch wide but combined into a big one). So essentially, I'm working at 10% the size of what the final print will be and my file size is 760mgs. You can only imagine how big the file would be if I work on the actual size.
using Paint for a few months with great results, but i'm having problems trying to get font sizes to fit a page i.e.A4, i set the canvas size dpi etc, but can't get for example the the letter H in Stencil font to fit to the page without selecting it and stretching it manually which makes it not look correct, the font size won't go past 288.
View 6 Replies View Relatedhow I can see if some .ico files are embedded with multiple sizes? I used the .ico plug-in and selected to embed all sizes, but I am not sure if this works. I'd like to be able to confirm it.
View 1 Replies View RelatedI am doing an e commerce page selling fairly traded products or eco things. obviously i need a logo and company name, which i am working on right now. this needs to go on a banner. the other things i'd like to have done are company statement "about us" terms and conditions postage prices and times rescheduled payment options Newsletter options.
View 2 Replies View RelatedI scanned a photo in to be edited, once I edited it when it comes to printing it wont come out the same size. My printing options are all about different frame sizes to put the photo into.
So I tried creating a new document where I set the size in centimetres, but when it comes to print how come I cant seem to get the option to print that size.
Just came upon an error I had not seen before. Though PSP no longer supports Animation Shop, up until PSP X4, the user has been able to export frames back to PSP from Animation Shop. Now, this no longer works! There's still some communication there, because an error message - which, incidentally, makes absolutely no sense at all - is generated in PSP X4:
View 2 Replies View Relatedproblems with the Export to JPEG dialog.
1. It does not show the original file size. At one time I used this as a cue to see if I had forgotten to resample.
2. After the installation of version 16.3, the displayed compressed file size is no longer accurate. It varies from perfect to reading 25% too high.
I developing a new website for a client....the challenge is that they have a load of images and photos that they want on the website...
Apart from causing the webpages to load slowly, Google also penalises these webpages.....
How to resize images to small sizes in pixels (25-35kb) but the image must still be fairly large i.e 600x600 and it must look good?????
Are there other programs available that can do this? Preferably free!
I created some posters last year and I need to make them again this year. For some reason I'm not able to increase the font size past 1000.
I wrote down the instructions last year. The only thing I can't remember is how I increased the font to 2000. I can get the font size to 1000, but as soon as I increase it nothing shows up on the screen except the blinking cursor.
I'm using Paint.net 3.5.10 build 3.510.4297.28964 on windows 7. I have the image resolution set to 300.
I have also tried this same thing using the latest version of Paint.net on windows 8. I get the same behavior but I can't increase the font size past 900.
The file I created is too large to attach.