lastly i'm creating graphics for some tshirts that i would to get printed but paint.net for example says that image xyz is 9cm wide when the truth is that if i import it to wordpad with 100% dimension it results 22cm Now how can i know the real dimensions of an image?
View 20 Replies
what's the best way to reduce an image's size and still keep it crisp?
If resorted to creating images ten times the target size and then reducing them later on to the target size, as i can control the FX much MUCH easier.
but the only issue is when i reduce their size, they don't look as good? i know it is possible somehow to keep the quality, but i'm not sure how.
Trying to reduce an image of 6000x1200 to a tenth of it's size for a Signature.
im using psp cs2.when placing images in the composition its easy to get lost and to have your images in a low resolution due to transformation. is there a way to see the effective ppi of a layer content? by effective ppi i mean the resolution of an image in perspective to its size.
View 3 Replies View RelatedCloning usually applies to a single object. For example if I take a square and make a clone of it, make any changes to the original, the clone will change.
However, if there's a group of a square, a text saying HELLO, and a circle. I make a clone of this group. Then if I squeeze the only the circle in the original [thereby making it an ellipse], the clone won't change. Is there a way to do this?
Windows 7 [64-bit], Core i3 - 3.02 GHz, 4GB DDR 3 RAM
I've tried doing this on similar close-ups of my own characters, but I can't get it as good as done here: I know it requires layers, and the smudge tool to get the results. But what is the technique used here where the lines are like 'marching ants"?------is this simply the 'magic wand' tool? I also reckon that Gaussian blur is used here also.
The steps are not made clear on this very effective technique---also the GIMP typeface/controls are not in English, but hopefully some good folks on here can recognize the style used here.....it's just the sort of thing I'm looking for to bring a bit of depth to my cartoon character shading.
I'd love to introduce this technique [ So far, I haven't been able to get the the dodge/burn tool to work as effectively as some other GIMP users can, but I'll certainly return to it].
cannot any longer establish caption
View 3 Replies View RelatedJust wondering how does one re-link an image (in this case a JPEG) if it comes up with a warning icon in 'XREF' dialogue window? Right cicking on the images warning sign and clicking on either 'Re-load' or 'attach' doesn't re-establish a broken link!
View 3 Replies View RelatedI cannot establish a publishing connection to Flickr from Lightroom 4.3. I get this message: Oops! Flickr doesn't recognise the "oauth_token" this application is trying to use."
View 1 Replies View RelatedI recently upgraded to LR 4.1, and I'm having a problem with the spot removal tool. I have 100% opacity selected, but it's only partially removing spots - looks as though it's only operating around 50 or 60%. Is there a feathering or hardness setting hidden somewhere?
View 3 Replies View RelatedIs there any way to put a non-destructive cap on color saturation, the way you can shelf frequencies above or below a certain level in audio engineering?
In other words, an adjustment layer that would limit all saturation values over X to.. well.. X.
Example : Let's say we set it to 80% max. Pixels with saturation levels of 80 or below remain untouched. Pixels with saturation levels over 80 are re-adjusted to 80.
(Simply lowering the saturation levels via an adjustment layer will lower everything, including portions that are already below the desired cap. We don't want that.)
What is the simplest, most effective way to mange a "main" cui globally, while allowing users to sustain their own workspace environment? In other words, I wish to globally administer the CUI by periodically adding various corporate settings (e.g., custom menus, ribbons, commands, etc). At the same time, I want each user to be allowed to keep their personal Workspace environment settings as desired.
View 6 Replies View RelatedHow to obtain the effective area of plot, plot in command?
View 9 Replies View RelatedWhen I make a print from CS6 the image on paper is narrower than the stated dimension in the program. The height of the image is faithfully reproduced. I know that there must be a preference setting to correct this but I can't remember which one it is.
View 8 Replies View RelatedIn trying to establish the tongue weight on a trailer modification, which inventor analysis tool would I want to use. I tried Stress analysis employing a teeter block but that only showed deflection caused by the various weights and not the affect of gravity. The gravity feature required data I don't have at present but before going through another learning curve I think it best to verify the appropriate direction.
View 8 Replies View RelatedMaybe my workflow is flawed but I thought I had done this before:
Drawing A has alignments and profile views
Drawing B has DS of alignments from A
User A is working on annotating profile views in drawing A. User B is working on design profiles in Drawing B, adds DS of design profile and everything looks correct in the DS node. But when we try to DS in the design profiles we get the message in the title.
Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram
Note: Its all Resistentialism, so keep calm and carry on
64 Bit Win7 OS
Using this
(setq nblock (vla-get-Effectivename(vlax-ename->vla-object block )))
I get the effective name dynamic block.
(if (nblock (= "test_block"));;;--->Which is the correct form? (command "_insert" "LABEL" pt1 "" "" "") );end if (if (nblock (= "test_block2"));;;;Which is the correct form? (command "_insert" "LABEL2" pt1 "" "" "" ) );end if repeat for all enames block
How i can select block to insert according to effective name?
To access MYSQL with FDO where should we place de file libmySQL.dll? With MAP its is in the <installation>FDOin directory but how come there is no such directory with Civil?
extract from Map help "If you cannot connect to your MySQL data source, you may see an error message: "Specified credentials are not valid or the provider is unable to establish a connection." To resolve the issue, copy the libmySQL.dll file into the AutoCAD Map 3DFDOin folder and try again."
I am always having a great problem while modeling knees and elbows. Some people say put three loops on knee and some people say put 5??.. If i put too many loops then it collapse while deforming and when i put less then it won't deform properly...
I just want to Know is there any effective topology technique for knees to deform naturally and which should look realistic while the character is on squatting positions.
Please Check out the attached Picture.
Is there a command within AutoCAD2000 to establish the centre of gravity of a solid or solids?
View 7 Replies View RelatedOur I.T department uses kixstart to run a batch script every morning, which is supposed to establish a network connection. The connection is 9/10 times available. 1/10 times it fails and means that workspaces and other user defined settings are inaccessible.
Bringing up the issue with I.T seams to eparch on there skills as a professional so nowadays I tend to bring it up once maybe twice but then settle for ding it my self
So what I found out is the following batch scrip/ snippet is used to establish a network
net use P: \AutoCAD_2012-08-22
I could compile a batch and then launch it using a lisp for example
(command “startapp”….
Or
(command “shell".However this would be hakky and also requires two files (the lisp and then also the bat file, rather keep it simple just the one).Is it possible to establish this connection using lisp?
I am trying to make a large poster for the banner thats on top of a shop on Photoshop cs6 i have the dimension in meters and centimeters and im just wondering if i put these in correctly, will this sure be the right size i need? because it is a little bit too big and i don't want no printing issues to happen.
i am running adobe Photoshop cs6 on a macbook pro, 2.53 ghz intel core 2 duo 4 gb ram mountain x lion
An image dimension to a specific size and extruded to a specific height with an empty cylinder through the middle for the wristband to pass through. All edges need to be rounded off somewhat so they are not sharp on the skin.
The face of the bead needs to be an exact cutout of an image that I have. I've used Photoshop to take the image and remove the background, so I have a .PNG with the background removed. I need to import this into AutoCAD and make this image into the face of the bead.
How can i stretch an inserted image as ole obj with different dimension of x & y.
i tried stretching it but its width and length is the same, can't properly put it in a specified area in my working space..
I noted a bug in GIMP 2.8. In the window Save as the dimension of the image is fixed at 1,3Gbyte even if the image is a few kbyte or you modify the quality.Here is the window: [URL]
View 2 Replies View RelatedHow do i check the final dimension of image or vector graphics when it is clipping masked in illustrator. If I check in transform it is showing the size including the clipping mask.. I just want to check final trim size of the image.....
View 7 Replies View Relatedi'm using my corelphoto paint x3 for a year now and it is working fyn then on one occassion i don't know but while editing an image, i suddenly discovered that my effect tools, paint tools, clone tools wont work or wont make changes on the image i'm editing... i've already checked the menus and settings but still no work..i also tried reinstalling the program but still it's all the same..
View 2 Replies View RelatedI'm having trouble using the paint brushes in photo paint x6. i open a JPEG or bitmap then use a paint brush to paint on the image but there is no paint. do i have to use a mask now? I tried copying a dupe for a second layer to see if that worked but nix. i still have x4 and i do it there. but what's with x6? all the other tools work but the paint brush.
View 14 Replies View RelatedI'm trying to get the dimension text that I pull out to the side closer to the actual dimension marks. The 2 1/2" and 2" shown have a minimum distance they can get toward their dimensions. I would like it to be about half of what it is, but so far I haven't been able to find the property that changes that.
View 3 Replies View RelatedI have one problem in ilogic "How to convert the normal dimension to driven dimension through ilogic"
View 4 Replies View RelatedIs it possible to override a dimension with some sort of formula or function that relates to the length of the dimension?
A simple linear scaling might be possible by inventing a new unit with the appropriate conversion ratio, but that wouldn't work. What I need for the dimension to display a length 400 less than the actual length.
How can I avoid getting zeros when creating dimension line with quick dimension command. the Zeros indicates the line itself. how it can be avoided?
View 5 Replies View Related
