AutoCAD Civil 3D :: Specified Credentials Are Not Valid Or Provider Is Unable To Establish A Connection
Feb 26, 2013
To access MYSQL with FDO where should we place de file libmySQL.dll? With MAP its is in the <installation>FDOin directory but how come there is no such directory with Civil?
extract from Map help "If you cannot connect to your MySQL data source, you may see an error message: "Specified credentials are not valid or the provider is unable to establish a connection." To resolve the issue, copy the libmySQL.dll file into the AutoCAD Map 3DFDOin folder and try again."
Our I.T department uses kixstart to run a batch script every morning, which is supposed to establish a network connection. The connection is 9/10 times available. 1/10 times it fails and means that workspaces and other user defined settings are inaccessible.
Bringing up the issue with I.T seams to eparch on there skills as a professional so nowadays I tend to bring it up once maybe twice but then settle for ding it my self
So what I found out is the following batch scrip/ snippet is used to establish a network
net use P: \AutoCAD_2012-08-22
I could compile a batch and then launch it using a lisp for example
(command “startapp”….
Or
(command “shell".However this would be hakky and also requires two files (the lisp and then also the bat file, rather keep it simple just the one).Is it possible to establish this connection using lisp?
I cannot establish a publishing connection to Flickr from Lightroom 4.3. I get this message: Oops! Flickr doesn't recognise the "oauth_token" this application is trying to use."
using 2013 and attempting to connect to a DEM downloaded from LSU Atlas. I get the "Failed to open FCO connection. Could not open/read from file" Am wanting to generate a watershed from the DEM surface.
I have an excel spreadsheet of boreholes. The spreadsheet has the format of ID, X, Y, Z
I have tried using the 'Connect to Data' feature in Map 3D 2012 64 bit.
The ODBC connection is created and tests correctly. After connecting to the ODBC DSN and loggin in, I am able to see the fields identified in the excel file. There is also the Class available from the named range in the excel spreadsheet.
I select my Identity Property, X, Y, and Z - but that's as far as I can go. I have no opportunity to set the coordinate system and the 'connect' button does not activate.
Using Win 7 64 bit - and I have the 64 bit ODBC driver's installed.
I am attempting to import a shape file in Civil 3D 2014 and get an FDO error (see attached). I have performed this task nearly everyday for an entire year in 2012 with the same file, method, etc. I change my workspace to 'Planning and Analysis", select 'Map Import' and select my shape file...error!
Maybe my workflow is flawed but I thought I had done this before:
Drawing A has alignments and profile views
Drawing B has DS of alignments from A
User A is working on annotating profile views in drawing A. User B is working on design profiles in Drawing B, adds DS of design profile and everything looks correct in the DS node. But when we try to DS in the design profiles we get the message in the title.
Civil 3D 2012 & 2013 HP Z210 Workstation Intel Xeon CPU E31240 @ 3.30 Hz 12 GB Ram
Note: Its all Resistentialism, so keep calm and carry on
How can I update the data connection source for all the display map layers in my map layouts? If I want to change the shapefile a layer is representing I can not get the layer to point to the new shapefile.
The layer seems to always remember the name/location of the old shapefile. If I export the layer and modify the value in Notepad then load a new layer from the saved and modified layer file it will change. However I would have to do this for every layer I want to change.
Is there another way to change the property of this layer in AutoCAD?
Example: I create a drawing and layout with a Display layer that points to the FDO data for shapefiles "C:datauildings.shp".
I then give the drawing to another worker hows data is on "E:DATABUILDINGS.SHP" the data connection to the layer cannot be updated that I can see.
I am unable to open my own pdfs in my Photoshop (ones that I have created in same Photoshop).I get the message "This is not a valid Portable Document File (PDF) document. It cannot be opened."
I have to keep recreating the art...ugh!! Is there a way to pull up history to replicate my artwork until I get this resolved?
I am having troubles attaching files to the existing .dwg file. I am trying to attach 6 drawings to one file, but evrytime i do it, it gives me a drawing id not valid error.
I am using OffsetTaget.isValid in my subassembly.But i realize that when i put this formula it checks the whole drawing for that target and if the target polyline exist even a piece of polyline in the drawing then C3D considers it for all sample lines.Is ıt possible to be able to check each single sample line if it is going to intersect that target polyline or not?
At the end of the day yesterday our server crashed while I was working on a drawing and today when I tried to open the drawing I got the message 'Drawing File is Not Valid'. Is there a way to recover the drawing? I tried the recover command but I got the same message. i tried converting the BAK file and CAD did not respond.
I just installed AutoCAD Civil 3D 2012 last week from upgrading from 2011. I just noticed that when I set up a new drawing coordinate system for a horizontal datum, I get a message "Coordinate System Code is not Valid". I know the files are loaded under the documents and settings folder, but I don't know why it's not reading them.
We have three old drawings (saved in the year 2009) that we are trying to open with AutoCAD 2013 and we keep getting the message "Drawing File is not valid".
I have done the following:
Files do have a file size. Sometimes, files have 0 KB size, but not these ones.
We tried to open the files using AutoCAD 2013, AutoCAD Architecture 2012 and DWG TrueView (downloaded today!) and in all instances we get the same message.
We tried recovering and the message is "unable to recover the drawing file"
We tried inserting as a block and, in the command line we get "...was created by an incompatible version of AutoCAD *Invalid*" Again, the file is genuinely older than our current AutoCAD.
I've created a simple cutdown kerb in Subassembly Composer 2013. I can't add Point, Link or Shape Codes & get the error message " The code (Flange for example) is not a valid input parameter or variable.
I'm having issues trying to create a point table. I have used this process before with no problem but now for some reason C3D won't create the table. I get an "NO VALID SELECTION" after selecting the C3D points. Why I'm getting this error? All my points are C3D points and C3D recognizes the points while the POINT TABLE CREATION menu is still visible but once it goes to create the table i get that error message.
This has been hit and miss. I am now consistenly getting a dynamic link server connection trying to use Track camera in After Effects.
64GB RAN Windows 7 proffesional i7 processor NVIDIA GEFORCE TITAN
I have enabled all the recommended programs through my firewall. I see the dynamiclink server is running in my task manager, I have closed all other programs, no antivirus, I have restarted my computer, no luck with this.
Also to add additional information:
It seems that when I try to do replace with After Effects composition in Premiere Pro I am getting error: The importer reported a generic error
and also when I first launch After effects I am getting a failure to load a few plugins from CineForm including importer
I am editing a Postgis table using the OSGeo FDO Provider for PostgreSQL/PostGIS in AutoCAD Map 3D 2012. As i have noticed that the serial type of the ID field does not give an automatic value to de ID field after inserting a new feature in the layer and after checking in (AutoCAD Map seems not to understand de nextval(sequence_name) function in the DEFAULT property of the ID field(thats how the autonumeric numbers work in PostgreSQL)), i am using a database side trigger which gives the next sequence value to the ID field of the new record. The trigger is launched BEFORE inserting a new record.
The problem is that after executing the trigger, in AutoCAD Map all the fields are still shown as null, and they are not displayed until i manually refresh the layer.
Is there any way to auto-refresh the layer after checking in a new feature?
Using the DAta Connections tool under Planning and Analysis, also known as Map 3D, I have attached a series of shapefiles and I want to be able to toggle the view of some of them on or off depending on the viewport. Is this possible to do?
My problem is that when i add a map through WMS connection and later turn my drawing with the map into a .pdf file, the outcome is a very large file (my certain A4 drawing was 30,4 Mb). I guess AutoCAD stores a lot more info than i need the drawing.
Managing with a 30Mb file is very difficult when i need to, for example, sent it through an e-mail.
We have just switched from 2010 to 2013, and are experiencing some problems on two different projects. The issue is that we have our pipe networks located within on drawing, then data shortcuted to our production drawings. However, the pipes are not drawing either in plan or profile to the correct size.
They read correct in the pipe size, the style is set to display the correct "parts" of the pipes, but they are incorrect. It is not consistent within regards to a single pipe size being incorrect, nor is it the same sizes between the two projects.
I have several SHP Connections that I am using as background. I can use the Style Editor to get the individual SHP Lines/Polygons/blocks to be the appropriate colors for the information that they include (Property Lines, Buildings, Utilities, etc)
The problem is in plotting this information. The settings in my tried and true .ctb file don't seem to apply to the SHP data. Everything else that actually exists in the drawing behaves correctly, but the SHP data plots as it appears on the screen.
I have edited my video using after effects. I have been unable to export my file to youtube using a valid file name. All of the results have issues with sound and quality.
Just wondering how does one re-link an image (in this case a JPEG) if it comes up with a warning icon in 'XREF' dialogue window? Right cicking on the images warning sign and clicking on either 'Re-load' or 'attach' doesn't re-establish a broken link!
In trying to establish the tongue weight on a trailer modification, which inventor analysis tool would I want to use. I tried Stress analysis employing a teeter block but that only showed deflection caused by the various weights and not the affect of gravity. The gravity feature required data I don't have at present but before going through another learning curve I think it best to verify the appropriate direction.
I have ran an analysis and SSA gave me Error 607 on the report. It says "Inlet A9 gutter capture curve is not a valid curve."
A couple things I did different from the video lectures...
I selected user define for the Tc to figure out Q. i computed those manually.
For the Inlets I have selected Maximum Capture Cutoff.
There are some inlets in this model I created that do not capture 100% of the flow so i created conveyance links to account for the bypass flow.Not sure why is not recognizing the Curve?
it is possible to render to mpeg 2 with specific settings for VOD content cable provider in Premiere Pro?
Is there a specific preset for it? Or do you really need an external plugin (like the very expensive QT plugin from PIXELtools?
For a cable provider I need to make SD content.Encoded some MPG 2 TS test files and uploaded them to the test-environment of the Cable provider.
The calbel provider said the files are almost approved, they need a little more tweaking.
But the cable provider only gives me a list of errors in return. Errors they see in in the testing environment before publishing.
1. Rendered MPG's have PCR errors (deviation in clock frequention)
2. to get better quality encoded MPG's, they say to stretch the GOP.
Since I'm not in to GOP's, M frames and I-pictures.They gave me a white paper with the following rules....
1. The first byte of the video elementary stream MUST be the first byte of a sequence_start_code.
2. The video elementary stream MUST contain an integral number of access units.
3. A Sequence Header and a Sequence Extension MUST precede each I-Picture.
4. All B-Pictures in the video bit stream MUST use prediction based on pictures present in the bit stream. Specifically, the first GOP in the video elementary stream MUST NOT begin with a B-Picture predicted from a reference picture that does not exist in the stream. That is, the first GOP MUST be closed.
5. For MPEG2 encoding, the length of each GOP SHOULD be 12 frames.
6. For MPEG2 encoding, the number of consecutive B-Pictures between anchor pictures (I-Picture or P-Picture) MUST be two or less.
how to set the above requested into the Premiere Pro exportsettings from below (my settings, to make an MPG